Zinsser B-I-N dries exceptionally fast. It is dry to the touch in just 15 to 20 minutes. For normal projects, you can recoat or paint over it after 45 minutes. However, to achieve maximum stain-blocking, water-sealing, and full film hardness, allow a full cure time of 1 to 3 days (up to 7 days for the B-I-N Advanced formula).
You can paint over Zinsser B-I-N primer in just 45 minutes. Because it is a fast-drying, shellac-based primer, it is touch-dry in about 15 minutes and ready to be top-coated with either water-based (latex) or oil-based paints shortly after.
Most projects only require one coat of Zinsser B-I-N Shellac-Based Primer. However, a second coat is necessary if you still see stains, knots, or dark colors bleeding through. It is highly recommended for porous surfaces or to ensure maximum stain-blocking on high-traffic,, light-colored, or high-tannin wood projects.
Yes, you can paint over B-I-N® with emulsion and almost any other type of paint.
Use only with adequate ventilation. Wear appropriate respirator when ventilation is inadequate.
In high concentrations, vapours and spray mists are narcotic and may cause headache, fatigue, dizziness and nausea. Acts as a defatting agent on skin. May cause cracking of skin, and eczema. Make sure to remove any contact lenses from the eyes before rinsing.
The Zinsser Mold Killing Primer is widely considered the best overall product. It is an EPA-registered water-based fungicidal protective coating that kills existing mold, mildew, and bacteria on contact and seals the surface to prevent future growth.
Yes, you can paint over Zinsser BIN with almost any paint product without issue. Sanding it may reduce its effectiveness. Just leave your coat of BIN for the recommended 45 minutes, then apply your other paint.
Red is universally considered the hardest paint color to cover. Vibrant red pigments are highly transparent and inherently prone to bleeding through subsequent layers. Other notoriously difficult colors to cover include black, dark blue, dark green, and bright yellow.
Leaving primer unpainted for a short time is generally fine, but leaving it unpainted long-term makes the surface hard to clean, susceptible to stains, and prone to absorbing moisture. Primer is porous and brittle, designed to bond to surfaces, not to protect them, so it may eventually peel or degrade without a topcoat.
Key Points. Use an extension pole equipped with an 18-inch roller and a full paint tray to paint faster. Prepare the area with drop cloths and painters tape, then paint the edges first. Work with a partner or use a paint sprayer for fast, effective coverage, especially for exterior projects.
October has many warm dry sunny days and although it does record the highest( not by much) average monthly rainfall, the rain is usually followed by windy autumn weather to dry things out quickly. It is therefore alright to paint outside in October. Just beware the cold nights.
Sometimes, if the surface is uniform, you're repainting the same color, and using a high-solids premium product. But even then, professionals prefer two coats for even sheen and long-term protection.
A short nap microfibre. Don't use foam. The BIN will cause it to decompose all over your freshly prepped piece. I put the roller - uncleaned - into a ziplock or vacuum seal bag.
Yes, you can wait a week to paint after priming. Most primers fully cure within 24 hours and provide an excellent, stable base. As long as you keep the surface clean and free of dust, grease, or dirt, you can wait days, weeks, or even longer before applying your topcoat.
Professional painters use both methods, often employing a hybrid approach. They spray for speed, flawless finishes, and hard-to-reach areas, but they roll for better paint adhesion, easier touch-ups, and in furnished spaces.
There are three main types of “impossible” colors: Forbidden colors. These are colors our eyes simply cannot process because of the antagonistic way our cones work, for instance “red-green” or “yellow-blue.”
Top 10 Timeless Paint Colors for Your Home
Cool gray is being replaced by "mushroom" neutrals (warm taupes and greys with subtle green or violet undertones), warm earthy khakis, and soft, natural sages.
Exceptional Stain-Blocking Power
Zinsser B-I-N Primer doesn't just stick to tricky surfaces; it also excels at covering and sealing stains. Whether you're dealing with water stains, smoke damage, or even knots and sap streaks in wood, this primer locks them in and prevents them from bleeding through your paint.
In most cases only one coat is necessary to prime most surfaces. If excessive absorption occurs over very porous substrates a second coat may be necessary.
It prevents the growth of mold, mildew and other fungal organisms on the paint film and is for use on non-porous interior and exterior surfaces.
Mold is generally at its worst from early spring through early fall (specifically July through October), peaking during the warmest and most humid months. Mold thrives in warm temperatures (60∘F to 80∘F) combined with relative humidity levels above 60%.
To kill mold permanently, you must combine targeted remediation with moisture control. No product works permanently if the source of moisture remains. The most effective approach includes using specific biocides, removing infested porous materials, and managing your home's humidity.
The Japanese practice of hanging futons and pillows outside to “air out” isn't just traditional — it kills mold and mites that love humid bedding. Wipe down bathrooms after every use. Exhaust fans during showers, wipe tiles and mirrors, keep surfaces dry. Bathrooms are ground zero for household mold.