Brushing weekly is a good rule generally, but there are specific times when brushing more often is advised. For instance, if your pool has just been resurfaced, more dust than usual will need to be filtered out, so brush at least two times a day for the next few weeks.
“If a pool's interior is not brushed or an automatic pool cleaner isn't run, algae will cling to the surface and the water will eventually turn green. It will take a lot of work to get the water clean and clear again.”
The most important step is to brush, brush, brush for the first two weeks. Twice a day, just like brushing your teeth. This is because as plaster cures, it leeches calcium into the water. If it's not removed, the efflorescence will cling to surfaces and eventually harden into a white scale.
Begin the process by brushing the walls of your pool to remove dirt, algae, and debris, paying special attention to the water line. For best results, do this the night before you vacuum the pool. Allow the resulting debris to drop to the bottom of the pool where it can be vacuumed later.
Brush the walls first
While some people choose to brush the walls of the pool after vacuuming, Adrian Harrison of My Perfect Pool suggests it's the first thing you should do. 'To minimize the chances of algae, the walls and floor of the pool should be brushed weekly,' he says.
BRUSHING THE POOL
It is recommended that the pool be brushed with a standard 18-inch nylon bristle pool brush at least twice per week. The entire process usually only takes 10 minutes and is well worth the time and effort.
Brush the pool surfaces (walls, floors and steps) weekly to remove algae that may be building up. Shock your pool water weekly to remove contaminants and clear up cloudy water.
BRUSHING THE POOL – As soon as your pool is full, you should begin brushing. Use a nylon bristle pool brush for plaster or a 50/50 (half nylon and half steel) for aggregate pools. Be sure to brush the whole pool-walls, floor, steps, seats, etc. You can't brush too much (a minimum of three times a day).
Keep your pump and filter running. Give the shock a good 12 to 24 hours to work its magic. If the algae hasn't cleared up after 24-48 hours, clean and brush the pool and add another shock treatment.
Although it's important to shower off any residual bugs that might have got through the chlorinated neutralising process, it's most important to shower the chlorine off your skin to prevent damage from those harsh pool chemicals.
So if the pool water isn't cloudy and the 'dirt' is clinging to the walls after brushing, the problem is likely to be Yellow/Mustard algae. Yellow/Mustard algae is very resistant to even high chlorine levels and will grow and thrive in a chemically balanced pool.
When swimming frequently, chlorine weakens the corneal layer of the scalp, causing irritation, dryness, and dehydration. Therefore, you have to shower after swimming and also should wash your hair in order to remove chlorine residues from the skin and hair.
At minimum, pools require weekly cleaning and care to ensure they stay in good condition, especially in the warmer weather. Skimming, checking filters, and testing chemicals all take a good amount of time if done correctly.
“We recommend shocking the pool water by adding a high dose of chlorine powder or liquid, brushing the pool surfaces then adding an algaecide,” Sergiou says. “Algae grows in layers and needs to be brushed to be suspended in the water to be eliminated. Follow with a clarifier and run the pool filter overnight to clear.”
How Much Should a Pool Evaporate in 24 Hours? On average, swimming pools lose about a quarter of an inch of water each day, yet variations in wind intensity, humidity and sunlight can drastically change water loss rates. Some of the strongest and most intense wind in the country can be found in mountainous regions.
It's best to run your pool pump during the day
Not only does sunlight give fuel for algae to grow, it also destroys your pool chlorine and this is why you should always run your pool during the day!
Adding shock to your pool super-chlorinates your water. And this extra dose of sanitizer will kill algae growth. The more serious your pool algae problem, the more shock you'll need. We recommend using calcium hypochlorite shock, or cal-hypo shock, as an effective algae treatment.
Shocking is the process of adding chemicals to your pool to raise chlorine levels and kill bacteria and algae. We recommend using a calcium hypochlorite shock to treat your algae problems.
Whether mild or severe, it isn't recommended. Significant amounts of swimming pool algae welcome a breeding ground of harmful bacteria that feed on algae. These bacteria pose health risks to swimmers, most commonly resulting in a skin rash. It can also cause various bacterial infections of the ears or eyes.
In fact, chlorine can be harmful to your eyes, hair, nails, lungs, and yes, even your skin. Not only that, but depending on your age, existing skin condition, and several other factors including the balance of chemicals in the water, chlorine can be anything from irritating to extremely harmful to your skin.
On average, you should run your pool pump around 6-8 hours per day during winter and 10-12 hours per day during summer.
Although vacuuming should be combined with pool shocking, it's better to vacuum the pool before you shock the water. A good scrubbing and vacuuming of the pool walls and floor will ensure that dirt and debris that can affect the water chemistry is removed before the chlorine is added.
Your swimming pool may look a little cloudy after your pool tech leaves because brushing and vacuuming will unsettle fine debris that was clinging to the pool surface. Your pool filter should remove particles that remain suspended, but some will inevitably settle back onto the bottom of the pool.