Dry time depends upon thickness of the application. Dry time is approximately 30-60 minutes (depending on material, humidity and temperature) or until a chalky finish appears. Unicorn SPiT dries quickly. Use a spray bottle of water to keep product from drying out and to easily manipulate.
Allow stain to dry approximately 6 to 8 hours.To darken the color, apply additional coats by following the instructions above. Let the stain dry 6 to 8 hours between coats.
In other words, don't let a section of stain dry before you blend it in with stain from an adjoining section. Let dry completely (usually 24 hours). For the best interior wood stain results, apply a second coat for a darker look.
UNiCORN SPiT BLOG
Multiple coats of gloss topcoat or one coat of epoxy / resin like FAMOWOOD GLAZE COAT will result in a unique, deep three dimensional effect. SEALING: While sealing is not mandatory, we advise sealing for durability and moisture protection. Multiple coats are recommended for extreme durability.
Use Unicorn SPiT right out of the bottle for a paint application or dilute it up to 10% with water for antiquing or dry brushing. Diluting Unicorn SPiT with water allows you to control the opaqueness. For antiquing or dry brushing, add 10 parts Unicorn SPiT in a re-sealable container to be diluted with water.
Dry time depends upon thickness of the application. Dry time is approximately 30-60 minutes (depending on material, humidity and temperature) or until a chalky finish appears. Unicorn SPiT dries quickly. Use a spray bottle of water to keep product from drying out and to easily manipulate.
Gloss sealer will achieve a semi three dimensional effect. High gloss epoxy / resin like FAMOWOOD GLAZE COAT will help achieve a deep three-dimensional look.
Yes. Mix Unicorn SPiT colours together to create your own special colour OR mix most any water-based paint (chalk style or mineral based) with Unicorn SPiT to create custom colours.
UNICORN SPiT allows anyone to turn ordinary objects into personalized MASTERPIECES! Use on wood, glass, metal, fabric, pottery, wicker, concrete and laminate. Excellent for Crafters, Makers, Hobbyists, DIYers and Pros too!
There are two ways to tell if it is an oil-based product is dry. If it is no longer tacky and it doesn't smell, it is dry. You can tell if a water-based product is dry by touching it. If its cool to the touch, it's not dry.
Rollers are a great way to apply wood stain as well for the speed at which you can apply the stain. However, when using rollers can be a disadvantage when you have hard to reach areas. If you are going to use a roller to apply your stain, make sure to have a brush as well for those hard to reach areas.
Yep, direct sunlight is the magic way to get your stain to cure and be dry to the touch faster! Just a couple of hours of direct exposure and your projects will be faster drying in the ideal conditions.
If the surface is still tacky or you can remove more than a faint trace of stain, the surface is not ready. If Gel Stain is tacky after 5 days, dry time requirements have not been met and it may never dry. The only alternative is to strip off the finish and start over.
Wait 24 hours before applying sealant. Oil-based wood stains have some advantages over water-based stains. If chemical fumes are not a concern, an oil base may be the right wood stain choice. They dry much more slowly, and slower dry rates allow a more even application.
If your gel wood stain isn't drying completely, it may be due to several factors such as humidity, temperature, or application thickness. Try increasing airflow, adjusting environmental conditions, or lightly sanding the surface to promote drying.
Unicorn SPiT is a water based gel stain and glaze paint. It can be waterproofed by applying a coating such as Epoxy Resin. Since it's water based it can't be mixed into resin, however once set, a coat of epoxy will add depth and brilliance to the colours while protecting the surface.
SEALING THE UNICORN SPIT
1. Poly-Acrylic – this is water-based which it told you not to use.
Mixing water with Unicorn SPiT helps the product to absorb into porous surfaces. Ensure your surface is clean and free of any dust, dirt, grime, oil, sealer, stain, paint, or anything else that may prevent clean application on the surface. Apply your mixture directly to the surface.
It's not like acrylic paint.
Unicorn SPiT is a “gel stain and glaze” (according to the website), and can be used to color wood, metal, and more.It has a much different texture than acrylic paint, and it's also highly pigmented.
The animal on the seal has long been considered a mythical Indus Valley "Unicorn" of which there are also traces in Greek writings. This motif may have represented a clan, ethnic group or trading class. More unicorn seals have been found in Mohenjo-daro (some 60% of all seals) than at any other excavated Indus site.
Wondering how to easily blend colors with paint or stain? Well Unicorn SPiT does BOTH! Our concentrated gel can be used as a paint, stain, watercolor or glaze! Here is some amazing paint blending techniques using Unicorn SPiT.
When Michele Nicole, art director at an adult day care center, couldn't find a nontoxic stain that satisfied her need for color, she invented her own. The result is Unicorn SPiT.
Unicorn SPiT works on glass! Our concentrated gel can be used as a paint, stain, or glaze. Just add water or water based sealants or use in full concentration for these amazing techniques!