Leave the white vinegar for 1 hour or so to let the vinegar work its way into the paver slabs. Spray the surface with soap and water, then scrub off. Rinse with warm water, then let dry. You may repeat the process if there are stains left.
To clean your pavers with vinegar, mix equal parts of water and vinegar in a bucket, let it sit on the pavers for an hour so that the vinegar has time to work, then scrub the surface with a brush or a sponge. Make sure you choose white vinegar for household cleaning, as other types of vinegar can stain.
While it may look like it's cleaning, vinegar will actually degrade the cement binding and slowly strip away the protective sealant from concrete and stone tiles. You see it suggested all over the web, and although vinegar can be a useful household cleaner, it should not be used to clean your patio. '
Water and mild dish soap is a popular cleaning solution because it's easy to find at home and it won't damage brick, but it will tackle stains. The BIA recommends using hot water for surface cleaning with a detergent. White vinegar and water, another common household cleaner, can also be used on mildew.
There are useful tools for cleaning paving stones, such as joint scrapers, sweepers, and pressure washers. In addition, pavers can be cleaned with a small pickaxe, broom, and garden hose.
White vinegar is good for cleaning pavers, though it's also acidic enough to erode the stones' surface. Diluted vinegar can be used safely to clean paving stones, though it should be used sparingly and infrequently to protect your paving from damage.
Water and white vinegar is a great cleaning mixture that can remove stubborn dirt and stains. If you have the time, you can use this in conjunction with a classic cleaning solution for the best results. Soak your stained pavers with the white vinegar & water solution, then let it sit for an hour.
Use a specialist cleaner
Try a specialist cleaner like Wet & Forget, at Walmart, which you spray onto the surface of the paving and leave. It can also be used on steps, fountains, patio umbrellas and other smaller outdoor areas. It's bleach-free and non-acidic but will remove mold, moss and grime without any scrubbing.
To clean paver slabs, you can use a detergent, such as Dawn, or a vinegar-water solution that is gentle enough to effectively clean without causing damage to your concrete pavers.
Wash patio slabs with white vinegar
This eco-friendly solution is made up of equal parts vinegar and water, which is then left to soak into the patio to correct any discolouration and also remove tough marks. You should first move all plants and furniture out of the way, then sweep the area to remove any moss.
Remember that vinegar can only be used for a short time on finished surfaces. Not only does it kill algae, but it eats away at polished cement if you leave it on the cement for too long. Vinegar can be used for longer periods on unfinished cement to remove algae, and it serves as an excellent cleaning agent.
Experts say they can do the trick for the patio as well. 'You can remove black spots easily from patios in an eco-friendly, low-cost way, with white vinegar,' says Laura Harnett, Founder, Seep. 'It has antifungal and antibacterial properties and will also stop the mould or lichen growing back.
A dish soap, like Dawn, is a safe place to start. The surfactants in dish soaps are designed to remove oil and grease, they're gentle enough to be used without issue on your pavers. In a bowl or bucket, mix the soap with water and pour it onto the stain and agitate. Rinse and repeat if needed.
OxiClean is a powerful concrete cleaner that works well on various materials, including pavement and grout. This concentrated solution provides excellent cleaning without leaving residue.
Can you power wash pavers? Power washing (also known as pressure washing) is also a very effective method by which you can remove dust deposits and various stains from your pavers. Just make sure that the water jet is not directed directly at the joints between the paving stones.
Try Concrete Stain
The simplest path to reviving tired pavers is to apply an acrylic-based semitransparent concrete stain, such as Behr Premium Semi-transparent Concrete Stain ($27/gal.; Home Depot) or Valspar Semi-transparent Concrete Stain ($28/gal.; Lowe's).
Although bleach is great at the whitening effect, you can use peroxide to achieve this. Hydrogen peroxide is an oxygenated bleach. It is safe for plants, so when you rinse this solution, it won't harm anything. It works together with the dish soap and baking soda to remove dirt and whiten dirty concrete.
Similar to cleaning pavers with muriatic acid, avoid an intense concentration of bleach, as it can damage the pavers.
Using Baking Soda
To use baking soda for this purpose, wet the weeds using your garden hose and sprinkle the baking soda on top of them. Baking soda is also helpful on how to stop weeds from growing between pavers. Just pour baking soda over your pavers and sweep it into the cracks.