Pool heaters have an average life expectancy of 6 to 12 years. But if you use them properly, keep them well-maintained, and make sure that the pool has balanced water chemistry, you can help them last longer than expected.
Gas heaters also tend to last longer than their solar or heat pump counterparts. With proper installation and maintenance, today's top-line gas units typically last seven to 10 years.
7-10 years is the average life expectancy of a pool heater.
If you want to get as much time as possible out of your pool, however, a heater is a good investment. With a pool heater, you can easily be swimming May through mid-October, giving you a good five months of use out of your pool. That's literally double the amount of time you'd get without one.
You should never leave your pool heater on overnight. Doing so is not efficient and will cost you more than it would if you just turned the pool heater off. While many of us know that heating a pool can take up to several hours, running it overnight defeats the purpose of heating it at all.
Keeping Your Pool Heated
However, since weather can be unpredictable, if you plan to keep your pool open during the colder months, you must keep your water heated well above freezing temperatures. Don't run the risk of ruptured pipes or allowing the cold to cause more expensive damage.
It depends on a few things to determine how long it takes a heat pump to heat a pool. However, overall a heat pump generally heats a pool after 24 to 72 hours by 20-degrees Fahrenheit. For smaller pools like a spa pool, the heat pump can heat a pool between 45 and 60 minutes.
It's true – when the weather is beautiful outside it's not essential that you need a pool heater, but if you want to keep using your pool all year round then a pool heater is ideal. Of course, in some states this is not possible to keep swimming in the winter because the weather is just too cold.
On average, natural gas burns about 1 therm per 100,000 BTUs per hour (British Thermal Units). Meaning, an average pool heater between 300,000 and 400,000 BTUs will cost anywhere from $3.30 to $4.40 per hour to heat your pool.
Calculate the pool surface area in square feet by multiplying the length and the width of your pool. Then, use this formula to figure out the BTUs you'll need your heater to put out: pool area (sq. ft.) x temperature rise x 12.
Remove the heater screws that secure the heat exchanger in place; move it to a clean surface. Apply a degreaser to the heat exchanger using a soft-tipped brush. Allow the degreaser time to loosen any soot. Wash the heat exchanger with a garden hose.
On average, pool pumps last eight to 12 years before needing replacement. Over time, it's normal for pool parts to begin to wear down. In addition, swimming pool technology has come a long way in the last decade.
Replacing your old gas pool heater is not such a complicated task. Indeed, most pool owners hire a professional to replace their pool heater. Many states require gas appliances to be installed by a licensed contractor; but buying it, placing it and plumbing it – you can do yourself.
Difficulty finding heaters is largely due to the COVID-19 pandemic, and stay-at home-orders, which Aleman said has also led to shortages of salt cells, replacement motors, smaller filters for above ground pools, and more. Meanwhile, he said, above ground pools are non-existent right now.
Some heaters wear out in three or four years, but Teledyne Laars / Jandy heaters normally last a lot longer. A product life of 10 to 12 years is not uncommon. Heater failure is usually the result of some outside cause—not normal usage—provided it has been properly maintained.
So, how much electricity does a pool heat pump use? About 5 kilowatts per hour per 100,000 BTU heat pump. For a general 100,000 BTU pool heat pump, the power you`ll utilize is approximately 5,000 Watts per hour. Typically, the National average for power stands at 13 cents for every kilowatt-hour.
Cost of Running a Propane vs.
The size of your pool also matters, with larger pools costing more to heat than smaller ones. On average, however, a gas heater costs around $200 to $400 a month to run. Electric heat pumps cost less, coming in at about $100 to $200 a month.
Pool water temperatures typically run between 78 and 82 degrees. Any cooler than 78 and you may come out of the pool shivering. Any warmer than 82 and you may feel like you're taking a bath.
The easiest way to shut off your heater is to turn the ON-OFF switch on the outside control panel to the OFF position. Your filter pump will continue cleaning your pool according to your time clock setting or filter pump control switch, but the heater will not operate.
However, in the Northwest U.S., a pool heater might be necessary to extend the swimming season for a large above ground pool. If you only need to warm up your pool a few times a season, or the pool isn't permanently installed, using a liquid heat blanket could be sufficient.
A pool that is uncovered can lose up to 5 degrees F overnight; a good cover can cut that loss by half. Used at night or whenever your pool is not in use, the pool cover can help save fuel costs by cutting heat loss regardless of the type of heating you utilize.
Overall, a heat pump usually requires between 24 and 72 hours to heat a swimming pool by 20°F (11°C) and between 45 and 60 minutes to heat a spa by 20°F (11°C).
Water Temperature
Using the heater only when the water dips below a certain point keeps the energy consumption down. For the average person, a pool that is 78 degrees or higher is comfortable. If you are trying to save money or energy, run your heater only when the pool water temperature dips below 78.