How long can you leave a pool empty? Well, the minimum amount of time possible in order to minimize the risk of serious damage. Most issues that require a pool drain will take at least a day or two to resolve, but it's recommended to not let it sit empty for any extended period of time.
Draining or emptying your pool of water can create a number of financial and structural headaches, including: Cracking the pool's shell. Damaging the interior lining or surface. Damaging the pool's coping and surrounding paving or timber work.
Draining a pool is risky business for several reasons. Your pool is not meant to be empty. Whether you have a vinyl, concrete, or fiberglass pool, it is at its best when it's full of water. Once the water is drained, you open yourself up to all sorts of damage, so drain a pool only when there is no other option.
First, if the draining is done at the wrong time or under the wrong conditions, you can actually risk damaging your pool structure and liner. All the water from your pool needs to go somewhere when it's drained, and that usually means the ground.
If the pool ever needs to be drained to replace the water or to maintain the plaster, it should never be left empty for more than eight to ten days at the most. More than this may cause the plaster to dry out and crack. Keep your pool full for best results.
The answer is always NO. Above ground pools need the weight of the water in them to provide an optimal level of stability. Without water supporting the wall you run the risk of the pool wall coming out of the track. Also without water in the pool the liner can shrink and no longer fit your pool.
An empty pool (or as little as 1/4 filled) and an exposed liner on a hot day can cause the liner to shrink from the heat and deem the liner useless. An empty pool is also susceptible to collapse. Especially, in high winds and/or bad weather.
Most inground fiberglass and concrete pools are built structurally to withstand the weight of the dirt against them when drained. However, if the groundwater is high enough, it can push the entire pool out of the ground. The pool shell acts like a ship and floats up in the groundwater.
Close the pool for winter – but don't drain it.
In winter, the water in your pool is still your friend. Especially when properly winterized, it helps to protect the pool liner, keep it clean and prevent unnecessary damage from debris, harsh weather and other factors.
Pool industry experts recommend you drain your pool and refill it every five to seven years. No two pools are alike, so there is no set number at which you must drain your pool.
While there are many myths about fiberglass pools, the one thing you should NEVER EVER do is DRAIN your fiberglass pool without professional help. Let me say that again, NEVER drain your fiberglass pool for any reason. In fact, we recommend NEVER letting the water level drop more than 2-3 inches below the skimmer!
Draining a pool can take up to 14 hours, depending on the size, so be sure to drain it on a day when you have sufficient free time. You need to be home to check on the pool, the hoses, and the pump frequently.
Drain the water down to no more than 6 inches from the bottom of the skimmer if you plan to use a standard floating winter cover. Use your pool filter, switched to the "Drain" setting, to empty the pool water.
Whether you drained yours partially or completely, the rules for refilling an above-ground pool are the same. At the end of the day, a pool is designed to be full of water.
White vinegar can be used as an alternative to other chemicals when cleaning your above ground pool liner. Since it is a mild acid, it will help to remove stains and debris from the liner. Like you would with bleach, apply the vinegar with a sponge, put it all over the liner, and then scrub it with a brush.
Pools very rarely need to be drained completely. If you have a vinyl-lined above-ground pool, leaving it full for the winter will protect the vinyl liner from shrinkage and other damage. Since these pools are above ground level, keeping them full ensures that the wind will not damage the walls, liner, or frame.
Yes! You don't have to close the pool, and you can keep it open year 'round, with or without a pool heater. Or for those in very cold climates, you could also consider a very late closing and early opening, winterizing and closing the pool for just 3 or 4 months, instead of the normal 6 or 7 months.
It is best to close your pool when the temperature of the water is consistently below 60 degrees. Once the water temperature drops below 60 degrees, microorganisms and algae cannot grow and become dormant for the winter season.
The first choice for draining swimming pool water should be to drain pool water into the sanitary sewer. In-ground pools typically have a sanitary sewer drainage inlet near the pool equipment. Pools and spas not plumbed with a sanitary sewer drainage inlet can be drained to a sanitary sewer line plumbed to the home.
It will take 14 hours to drain a 25,000 gallon pool if you are pumping at 30 gallons/minute or 1,800 gallons/hour.
How long it will take to drain your pool will depend on the size of your pool, and how many gallons per minute the pump can move. But you're probably looking at somewhere between 8 and 14 hours for your pool to empty.
A 10,000 gallon pool will take about 14 hours to drain, the maximum rate recommended by the City of Phoenix. It will take twice as long to drain if the pool size is doubled or cut in half.
Main drain - leak at the drain or drain pipe. Two local pool experts I called said that this is very, very rare, so they are saying this is low likelihood. Return lines - Pump could have been sucking water from the main drain, then on returning to the pool, the water is lost through a break in one of the return lines.
Most pools experience between 3mm - 7mm of water loss each day, depending on where you live.