The definite number of days the pool will be safe will also depend on the temperatures of the water, the weather at that particular time, the level of chlorine, and how clean the pool was before the pump stopped functioning. On the other hand, it can be left for longer as long as no one swims in there.
Your pool can keep running for a few days with no problems while without a pump. However, know that a standard pool needs a pool running for at least once in 24 hours, or you might notice an algae bloom. So, it's best to have your pump ready as soon as possible.
As long as you can see the bottom of the pool at the deep end and FC is above minimum but below SLAM levels, you're good to go. Sounds like you're watching the chemistry well, so go for it!
In most cases, you can operate the cartridge pool filter without the filter cartridge inside the tank just to maintain circulation as you wait for the cartridge to dry. However, doing so requires you to ensure you've removed all the internal parts and reassembled the tank tightly.
Yes, you could do that. If you use liquid chlorine you could pour it in, run the pump about 1/2 an hour and then shut it off. Just make sure the skimmer basket is in place so you don't suck any large debris into the system.
If you are going to have a swimming pool, you must have a filter system that collects all the debris that can accumulate in a pool. In most areas there are actually legal requirements as to how quickly the water in the pool must go through the filtering system.
A pool can only be safe for swimming without a pump for a few days and a maximum of one week. The definite number of days the pool will be safe will also depend on the temperatures of the water, the weather at that particular time, the level of chlorine, and how clean the pool was before the pump stopped functioning.
So if you have to leave it running for a week it shouldn't make a big dent in the electric bill. Having to spend the money on getting the pool back in shape will probably cost more than leaving it on anyway. I would make sure you fill the pool water as high as you can though since you will be gone for a week.
Be aware that the longest amount of time a pump should be off is two weeks. If you will be gone for longer than this, then the pool must remain clean while you are away. You can keep your pump on but turn off the filtration system to avoid running up electricity bills.
Short answer--yes. The first response, however, would be why would you use a pool without a filter? The sand filter or other filtration system is essential to the health and safety of the swimmers. It is also necessary to have a circulation pump for maximum chlorination.
To keep the pool clean without a filter, it is necessary to use chlorine with a flocculant or to use a flocculant chemical. This product groups the impurities that float in the water, causing them to fall to the bottom of the pool so that they can be removed later with a cleaner.
I think the answer to your question is about 3-6 days. The problem is that the chlorine that you need to keep the bacteria in check is used up more quickly as the temperature rises, the activity increases, and as sweat and other body stuff is put into the pool.
If you want to activate the pump once a day, start with six hours, but never go lower than five hours, especially in the summer. If your pool is in constant use, you may need to run the pump for up to eight hours per day, frequently checking the water clarity and chemical balance.
Well maintained pool water can last up to 5, maybe even seven years before you need to replace it. This means weekly cleaning, functional filters, and checking ph levels every day.
Depending on the size of your pool, we still recommend the pump run 8-10 hours per day during the hottest summer months and at least 6 hours per day during the winter months.
Even from a health standpoint, it is simply not safe to operate a pool without some added “chemicals” to combat bacteria and contaminants in the water. A pool without chemicals is the perfect breeding ground for bacteria, viruses, and parasites.
While the quart or so of water that was setting in the hose may have some chemical contaminants in it, by the time that is diluted into thousands of gallons of water, it's of no concern. That is of course assuming that your swimming pool is not your primary source of all drinking water.
The procedure for adding granular chlorine is pretty much the same as adding calcium chloride or sodium bicarb to a pool. Measure the dry chemical, pre-dissolve in a bucket, and pour around the perimeter of the pool (never into the skimmer directly). There are a few types of dry, granular chlorine.
If you need to mildly shock a 30,000-gallon pool by raising the free chlorine concentration to 5 ppm, you need 2.5 gallons of bleach. To raise it to 10 ppm, you need 5 gallons.
How Often Should I Shock My Pool? Shocking your pool regularly will help to keep the water clean and free of contaminants. You should aim to shock your pool about once a week, with the additional shock after heavy use. Some tell-tale signs that your pool needs to be shocked are cloudy, foamy, green, or odourous water.