A farmhouse sink installation can be done in 3 ways: Flush mount Installation: Where the sink sits in level to the countertop. Built-up Installation: Where the sink sits above the level of the countertop. Undermount Installation: Where the sink sits just below the countertop.
Step 6: Add Support to Cabinets
Because farmhouse sinks are pretty heavy, you'll need to add support to the inside of the cabinet to be able to hold the weight. You can do this by adding two two-by-four pieces of wood to the sides horizontally.
A farmhouse sink needs supports attached to the inside of the cabinet because it's heavy. Some can weigh over 300 pounds when filled with water. The top of the sink needs to be even with the cabinets so the counter will sit correctly.
Farmhouse sinks are typically installed undermount and hence, are not compatible with laminate countertops. Look for an over-mount farmhouse sink that could be retrofitted with the cabinets and one that sits on top of the laminate countertop to eliminate the risk of water damage and warping.
Pry open the countertop with a screwdriver until you have enough space to move the sink. Saw granite and cabinet based on dimensions of the sink. Cut and install a new cabinet top using a reciprocating saw. Install the new sink and connect plumbing pipes.
Also known as a farm sink, an apron sink, or an apron front sink, farmhouse sinks were common in older homes and ergonomically designed for people to spend hours in front of the sink. Farmhouse sinks jut out past the countertop so the user doesn't have to bend over to reach them.
To make space for the extra-large sink, you'll need an 'apron-skirt' cabinet design. A farmhouse sink can't fit into the usual drop-in sink space and extends over the top quarter of the lower cabinet. This requires a full re-design of the cabinet and countertop where your farmhouse sink is installed.
One of the drawbacks of choosing a farmhouse sink is the installation process. Depending on how your kitchen is set up, you may have to alter the size and design of your countertops before the farmhouse sink installation. Farmhouse sinks are much deeper and wider than classic kitchen sinks.
Finally, there is a difference in the style of the two sinks. Farmhouse kitchen sinks are designed to add a rustic, farmhouse-style aesthetic to the kitchen, while apron sinks are more modern and sleek. Both farmhouse sinks and apron sinks are excellent choices for any kitchen.
The Key Differences between an Undermount vs a Drop-in sink.
An under-mount sink is installed below the sink, so the rim is hidden from view. This increases the counter space available in addition to making it much easier to clean the counter. A drop-in sink is installed above the counter and has a visible rim.
Whether you have a shining copper sink or a gleaming fireclay basin, the most reliable solution is a sink grid placed in the bottom of your Farmhouse sink.
Fortunately, farmhouse sinks are designed to work in existing kitchen sink cabinets. They do require modifications, but none are very difficult. The first step is to remove the existing sink, then make a sink access-notch in the face frame just above the doors.
Unlike regular “drop-in” sinks, which are lowered into a countertop cavity, farmhouse sinks are installed beneath the counter and rest on top of a base cabinet. They, therefore, require a special cabinet configuration, but it's entirely possible to convert an existing drop-in setup to accommodate a farmhouse sink.
Install the sink
For now, the sink just rests on top of the framing – no need for fasteners or adhesive. The ¼” gaps on both sides of the sink leave room to make final adjustments when the countertops get installed. Use a level to make sure the sink is even in all directions so that water will drain properly.
A porcelain farmhouse sink is a highly coveted kitchen feature—and for good reason. Farmhouse sinks are beautiful, spacious, and timeless, plus they add a distinctive look to any kitchen they're placed in.
Once everything is in place and you're sure you won't need to move your sink for anything else, caulk around all the edges where your sink meets your countertop. Then, caulk around where your sink meets your trim pieces too!
A good place to start when looking for the right size is with the most popular sizes for farmhouse sinks, small, medium, and large. Or the most common, either a 30″ or 33″ single bowl.
Kohler makes farmhouse sinks with smaller aprons to keep the same aesthetic in a more manageable size for some cabinets. In most new homes the kitchen sink is approximately 30 inches in length, which is a standard size for a farmhouse sink. The other standard sizes are 24, 33, and 36 inches.
By its nature, a farmhouse sink involves more than a traditional unit, and the price difference is justified. These larger, deeper, more statement fixtures are often made with more expensive materials, such as fireclay or copper.
2. Farmhouse sinks (+26 percent) Porcelain, apron-front sinks are a splurge kitchen choice for sure—but apparently they pay you back big-time in the long run.
Fireclay Sinks
These sinks are extremely popular these days and understandably so. Fireclay is made when clay and glaze are fused together at extremely high temperatures. This creates a highly durable material that is hard and resistant to chips and cracks.
The most common countertop overhang is 1.5″. We wanted our sink to go about 1/2″ past the countertop, so we positioned our sink so that it would go 2″ past the cabinet face frame/front of the cabinet.
Farmhouse-Style Sinks with Quartz Countertops
Cambria surfaces are durable—more durable than marble or granite countertops—so they're the perfect choice to handle the needs of a farmhouse sink installation.
The shape gives this design more of a compact space, allowing drop-in farmhouse sinks to be available in single, double or even triple bowl styles. However, since these sinks are dropped in, additional supports should be placed to reinforce the sink as it does not have a wall anchor.
Apron sinks are deep cut, like farmhouse sinks. The only difference is, an apron sink's front is exposed. That's why they're also called "apron front" sinks. Modern kitchens use apron sinks as highlight pieces, and for good reason.