Bleach is a great way to clean pavers because it is a strong disinfectant. It will kill any germs or bacteria on the surface and remove any molds, plus it will also brighten them up. It is common to mix bleach with water; however, you can also add other ingredients to make it more effective.
CLEAN PAVERS WITH SOAP OR DETERGENT
Directly apply dishwashing soap or laundry detergent to the smudge and let it sit for at least 2 hours or longer if time permits. Reinforce it by pouring dish soap and water mixture. Use a bristle brush to scrub your paver lightly.
To create a powerful mold-killing mixture, you can add one cup of bleach to a gallon of water. However, you should exercise meticulous care and caution since bleach can discolor your brick pavers and thus ruin your precious hardscape.
Although bleach is great at the whitening effect, you can use peroxide to achieve this. Hydrogen peroxide is an oxygenated bleach. It is safe for plants, so when you rinse this solution, it won't harm anything. It works together with the dish soap and baking soda to remove dirt and whiten dirty concrete.
The acetic acid in vinegar is a little stronger than acid rain, so exposing your pavers to this substance can lead to bleaching, corrosion and the loss of protective sealant.
OxiClean is a powerful concrete cleaner that works well on various materials, including pavement and grout. This concentrated solution provides excellent cleaning without leaving residue.
Water and mild dish soap is a popular cleaning solution because it's easy to find at home and it won't damage brick, but it will tackle stains. The BIA recommends using hot water for surface cleaning with a detergent. White vinegar and water, another common household cleaner, can also be used on mildew.
Yes, you can pressure wash your pavers. But while using a pressure washer at a basic level is simple, ignorant and inexperienced users can easily damage their pavers by using a stream that's too powerful, by holding the wand too close to the pavers, or by falling into any number of other rookie mistakes.
Dilute white vinegar with water in a bucket, at Walmart (a 50:50 solution is fine), and apply this natural, eco-friendly cleaning solution to the paving slabs with a firm brush and rinse thoroughly.
A dish soap, like Dawn, is a safe place to start. The surfactants in dish soaps are designed to remove oil and grease, they're gentle enough to be used without issue on your pavers. In a bowl or bucket, mix the soap with water and pour it onto the stain and agitate. Rinse and repeat if needed.
To clean your pavers with vinegar, mix equal parts of water and vinegar in a bucket, let it sit on the pavers for an hour so that the vinegar has time to work, then scrub the surface with a brush or a sponge. Make sure you choose white vinegar for household cleaning, as other types of vinegar can stain.
Baking soda is an amazing household cleaner, and it can work really well on your pavers too.
Dry brushing with or without application of clean sharp sand. OR High pressure water jetting with or without detergent. OR Apply fungicides. Use ordinary bleach or calcium chloride followed by sodium hypochlorite dissolved in water (1kg in 5 litres) then scrub with stiff brush.
Apply the Simple Green solution. Allow the product to soak for a minute or so on heavy soils and greasy spills. Scrub, if necessary. Scrubbing with a soft bristle brush or non-abrasive scrubbing pad provides agitation that will help to loosen soils and will ensure a thoroughly clean, residue free surface.
If used incorrectly, muriatic acid can damage the surface of porcelain pavers. It is important to dilute the solution according to the manufacturer's instructions and to rinse the pavers thoroughly after using the solution.
Whether your patio is sealed concrete or cement, or even sealed concrete pavers, a bleach and water solution makes it easy to clean away built up soil, stains from leaves and pollen, mold, mildew and algae.
Exposure to sunlight is the primary reasons why pavers fade. The sun causes fading of any pigmented item, from fabrics and paint to the pigments in the stones. You might notice some mottling of the color of your paving stones as the years go by. This is because the pigments do not penetrate into the aggregate.
Efflorescence occurs when water-soluble salts within concrete migrate to the surface and react with carbon dioxide to form calcium carbonate. This substance remains visible on the surface of the hardscape products like pavers, slabs and walls in the form of a white haze.
Cleaning concrete with vinegar will not damage it! However, saturating concrete for an extended period will damage the cement that binds concrete together. Over time, vinegar erodes the concrete itself, so be careful.
Dish soap and water: Dish soap is a degreaser, and it works well to clean oily and grimy concrete. Create a cleaning solution of warm water and few drops of dish soap and apply it to the surface. Let it sit for a while, then mop the patio and rinse it with fresh water. Repeat the process as many times as needed.
Regular Soap and Water
A solution of regular dishwashing soap or hand soap is simple to create, and it will remove mild to moderate dirt, stains, and grease. Just mix your soap and some warm water in a large bucket and you're ready to start cleaning.