One easy method is to use standard cooking oil or oil-based materials. Vegetable or canola oil can work wonders, as can peanut butter or mayonnaise. Spread it on, let it soak into the residue for about an hour, then wipe it away. For a tougher clean, try rubbing alcohol or vodka.
Acetone: Acetone is a common solvent that can soften some types of adhesives, including some epoxy formulations. Soak a cloth in acetone and apply it to the glued area. Let it sit for a while before attempting to scrape the glue off.
Apply Heat
Some stubborn adhesives melt or soften and become much easier to remove when heated. Heat the adhesive using a heat gun. If you do not have access to a heat gun, a hair dryer may work in a pinch. Once the surface is hot, try to gently scrape the adhesive away using a putty knife.
The recommended solvent to dissolve or remove hardened ``super glue'' aka cyanoacrylate glues (CA glue) is acetone. It works extremely well to remove the glue from fingers and other non-porous surfaces.
Silicone-based adhesive-removal products are the best option for aiding PSA removal. They evaporate, leave no residue on the skin, and are not noted for causing dry skin. If you don't have access to silicone-based products, other options include water, alcohol, or emollients.
Submerge dried out glue into a bowl of boiling water to revive it. If your Elmer's glue or craft glue is dried out, try heating it up. Heat will soften the glue, potentially reviving it enough to satisfy your needs.
Pressure-sensitive adhesives are designed for either permanent or removable applications.
To remove adhesive residue from metal, you should try using rubbing alcohol, or isopropyl, first. Apply with a cotton ball and let it soak in. Most adhesives will break down on contact, and rubbing alcohol won't damage metal surfaces. If that doesn't work, baby oil is another useful alternative.
Blot the glue with acetone or rubbing alcohol and let this substance break down the glue. Clear away with a damp cloth. For fabric: Use acetone, but test sparingly first to avoid potential damage. Once the adhesive bond has begun to break, apply a pretreatment stain remover deep into the glue.
3M adhesive remover is amazing stuff. It beats Goo Gone by a wide margin, I recently used it to remove PETG residue from my 3D printer bed and that stuff is gnarly. 3M 38983 General Purpose Adhesive Remover - 12 oz. https://www.amazon.com/dp/B004EBNTYK/ref=cm_sw_r_cp_api_i_cU...
Acetone-based nail polish remover is another valuable substance that can help eliminate your 3M adhesive residue. Acetone is a solvent that will cut through any sticky residue you might be dealing with, allowing you to effectively save on costs related to adhesive removal and use a substance you just have lying around.
To remove strong adhesive left by a sticker, apply an oil-based substance like cooking oil or WD-40 directly onto the adhesive. Let it sit for a few minutes to loosen the glue, then gently scrape it off with a plastic scraper or credit card. Wipe clean with a damp cloth.
Soak a cleaning rag or cotton ball in pure acetone. If pure acetone isn't handy, try nail polish remover. Press the rag or cotton against the glue until it dissolves.
Acetone — or nail polish remover with acetone — can be an effective super glue remover. It may help dissolve super glue from the skin. If you get super glue on your face, nose, mouth, or ears, or if you swallow super glue, get medical help immediately.
Hydrogen peroxide is especially good on super glue, and it's a safe way to clean up most glue spills on metal. Soak a cotton ball with the hydrogen peroxide and press it onto the glue until it softens. Use fresh cotton balls as needed to blot up any glue residue.
Use a damp cloth. Apply acetone. Use a cotton ball soaked in pure acetone or nail varnish remover, and press it against the glue. Once it's dissolved, it should be easy to wipe away.
Acetone: Found in most nail polish removers, acetone is the go-to option for super glue removal and generally works well on most of these surfaces. Be careful using acetone on varnished wood and even some fabrics as it can cause additional damage.
Toluene, or a mixture of toluene and ethyl acetate, works well to swell the adhesive, which can then be removed by scraping.
Fugitive glue is commonly known as credit card glue or “booger glue.” The thin strip of gummy-like glue attached to new gift cards, credit cards and membership cards is fugitive glue—a formula that is easily peeled off the surface it bonds with.