Soak the glue residue in rubbing alcohol, acetone, or vinegar. Leave it soaked for a few minutes then try scraping it off again. If the glue still proves too stubborn, try heating it up with a hair dryer.
How to Use: Soak a cotton ball or cloth in rubbing alcohol and apply it to the residue. Let it sit for a few minutes to break down the adhesive, then gently scrub with a cloth or plastic scraper.
Soak a cleaning rag or cotton ball in pure acetone. If pure acetone isn't handy, try nail polish remover. Press the rag or cotton against the glue until it dissolves.
Goo Gone is my preferred adhesive remover. It uses limonene, a natural adhesive-dissolving compound found in citrus fruits. You can get it in pretty much any grocery store if you live in the US.
Apply Heat
Some stubborn adhesives melt or soften and become much easier to remove when heated. Heat the adhesive using a heat gun. If you do not have access to a heat gun, a hair dryer may work in a pinch. Once the surface is hot, try to gently scrape the adhesive away using a putty knife.
Rubbing Alcohol or Vodka
Vodka is a good substitute. Wet a paper towel or clean cloth with rubbing alcohol, and rub the residue to lift it off. For stubborn stickers, place an alcohol-soaked cloth on the area and let it sit for several minutes to soften the residue. Use the cloth to rub off what's left behind.
3M adhesive remover is amazing stuff. It beats Goo Gone by a wide margin, I recently used it to remove PETG residue from my 3D printer bed and that stuff is gnarly. 3M 38983 General Purpose Adhesive Remover - 12 oz. https://www.amazon.com/dp/B004EBNTYK/ref=cm_sw_r_cp_api_i_cU...
Is using soap and water not enough? Something a bit stronger like nail polish remover or vinegar can do the trick. Soak a cotton ball with either of the two and dab it on the glue residue. If the finish of the wood is a big concern, use vinegar instead as it is the milder of the two.
Use a cotton ball soaked in pure acetone or nail varnish remover, and press it against the glue. Once it's dissolved, it should be easy to wipe away. Alternatively, try scraping away the glue. Use a putty knife or razor blade.
Acetone-based nail polish remover is another valuable substance that can help eliminate your 3M adhesive residue. Acetone is a solvent that will cut through any sticky residue you might be dealing with, allowing you to effectively save on costs related to adhesive removal and use a substance you just have lying around.
One easy method is to use standard cooking oil or oil-based materials. Vegetable or canola oil can work wonders, as can peanut butter or mayonnaise. Spread it on, let it soak into the residue for about an hour, then wipe it away. For a tougher clean, try rubbing alcohol or vodka.
Acetone is a solvent that breaks down super glue. So, try applying acetone or nail polish remover that contains acetone to the affected area. This should help dissolve the super glue. You should then be able to gently peel or roll the glue off.
It's unsurprising, then, that the world's strongest glue is an epoxy resin. DELO MONOPOX, made by the German adhesives company DELO, currently holds the Guinness World Record for the heaviest weight lifted by glue (bit.ly/3RFEZv2).
If you've ever wanted to know how to remove super glue quickly and easily, just reach for the can of WD-40 Multi-Use Product you probably have in your cupboard. Simply spray it on, wait a minute to allow it to penetrate the adhesive, and either scrape the sticker off or wipe the residue away with a soft cloth.
Hydrogen peroxide is especially good on super glue, and it's a safe way to clean up most glue spills on metal. Soak a cotton ball with the hydrogen peroxide and press it onto the glue until it softens. Use fresh cotton balls as needed to blot up any glue residue.
Blot the glue with acetone or rubbing alcohol and let this substance break down the glue. Clear away with a damp cloth. For fabric: Use acetone, but test sparingly first to avoid potential damage. Once the adhesive bond has begun to break, apply a pretreatment stain remover deep into the glue.
Acetone is a powerful and widely used solvent that is especially effective at removing strong adhesives such as super glue. It works great on hard, non-porous surfaces such as glass, metal, and certain types of plastic.
Saturate the cloth in either the warm soapy water, white vinegar or nail polish remover. Place the rag over the area and allow for the solution to saturate the adhesive. Soak times will vary depending on the size and adhesion power of the residue. Wipe away the solution (and the sticker, label, or glue) with the cloth.
If you only have a small amount of residue to remove then you can soak the affected area in a standard cooking oil like vegetable, sunflower or olive oil. Simply let it soak into the glue residue for about an hour, before wiping it off. If the staining is heavier, then you might need to try acetone or rubbing alcohol.
Yes. Dawn dish soap, known for its grease-fighting capabilities, can effectively remove sticker residue. Add a few squirts of Dawn dish soap directly to the sticker residue. Let it sit for 10 minutes, and gently rub it with a cloth until the adhesive dissolves.
Olive oil worked okay. I had to scrape for quite a while to get the adhesive off but in the end the lid came clean and will work if olive oil is all you have in your kitchen.