Remove laminate cabinet doors from their frames and remove all hardware, including hinges. Check the laminate for damage and repair any cracked or warped laminate; you don't want to paint over the damage. Finally, clean the doors and sand them lightly. Use a tack cloth to make sure the doors are dust-free.
In short, you can't. Sanding the laminate surfaces to “scuff” the finish and provide a surface for the primer to adhere to is a critical step in the process. But first, remove the doors, drawers and hardware. Then, take time to look over the cabinets and repair any spots where the laminate is coming loose.
Laminate doesn't play well with all primers and paints, only those specially formulated to adhere to its picky surface. If you opt for a primer, choose a bonding primer tenacious enough to stick to laminate (view example on Amazon), and then top it with an oil- or latex-based paint after the primer has cured.
You can paint the cabinets with oil-based paints, acrylic paints, or melamine paints once they have been primed. Moisture-resistant materials in the paint make Melamine paints ideal for painting laminate surfaces, since they are just right for the moisture and steam that are so prevalent in kitchens.
If you're not going to sand down your laminated door, be sure to clean it thoroughly before painting and definitely use an Adhesion Promoting Primer. The smooth plastic finish just isn't very easy for paint to stick to naturally, so I would 100% recommend priming and sanding the surfaces.
INSL-X STIX Waterborne Bonding Primer is one of the best primers for laminate furniture. This primer is made specifically to bond to surfaces that are hard to coat, and will give you a smooth, level finish.
A sure way to recognize wood laminate is when the grain does NOT follow through your piece. Wood Veneer is a sheet or thin layer of 'quality-natural-hardwood' that is adhered to a lesser quality wood surface. Wood Veneers give the impression of a more desired quality wood without being as costly.
Chalk paint is famous for sticking to just about anything, and in this case it makes the perfect primer between the laminate surface and the Satin Enamels paint. It's easy to apply and dries quickly. And the Satin Enamels provide the perfect durable finish over the chalk paint.
You must prime laminate. A primer will allow the smooth surface of the laminate to grip the paint. Without primer, your paint will bubble up and not properly adhere to your cabinets. Selecting the right primer is more important the topcoat for successful painting with laminate.
Laminate Cabinets
This process leaves a completely smooth surface that does not show any seams. The lack of seams around the door's joints can be a clear indication that your cabinet doors are a laminate material.
If you don't clean before sanding, contaminates (like cooking grease) will be pressed down into the wood. Contaminates will keep the soon be applied paint for sticking. You can remove the doors here in the process or wait until after you wash them down. It is totally up to you and situational dependent.
I always use Kilz primer for laminate and have had great luck with it. For painting laminate furniture, you want to do at least 2 coats of primer and let them cure completely (overnight if you can!) in between coats. You can even sand in between coats for maximum adhesion.
You can sand, prime and paint laminate as if it were a solid wood piece of furniture! It's easy to skip the sanding step, because sanding is a drag… but it's especially important with laminate. Because it's often somewhat glossy-looking, and important to sand it down until the finish is very dull before priming.
Priming Your Laminate Cabinets
Apply one or two coats of primer to your cabinets and follow the drying time for each coat. It is tempting to recoat soon after but always allow for the paint to fully dry. Once the primer is dry you can apply your topcoat. You can use either an eggshell paint or satinwood paint.
Clean With Mild Dish Soap
Like with wood cabinets, you shouldn't need to resort to abrasive cleaning products like vinegar or baking soda to remove dirt and grease from your laminate kitchen cabinets. A bit of dish soap in warm water applied with a good dose of elbow grease should be more than sufficient.
Paint your formica countertops with epoxy-based paint. Due to its dry nature, it is harder to use and more durable than other regular paints, and it will last longer. Epoxy paints are also available in a variety of colors and styles, making them an excellent choice for painting.
The KEY to having the paint stick is to use the proper primer. I recommend using Zinsser Oil Based Primer. This stuff sticks like glue! I love their water based primer too, but when painting laminate, just go for the oil based, I feel it adheres better.
The best way to do it is to use a heat gun to soften the adhesive and pull the laminate off in sections, starting with the edging. Some MDF cabinets have a plastic coating, and removing a plastic coating from kitchen cabinets is usually easier than removing a wood laminate.
The question is: “can you paint Formica Kitchen Cabinets?” The simple answer is “Yes.” Instead of replacing your Formica Kitchen Cabinets, you can paint them to give them a fresher look. As compared to wood, it is important to know that Formica requires a little more preparation – especially in terms of painting.
Yes! You can chalk paint over veneer furniture. But you need to make sure to prime. Veneer can be a very smooth surface, so chalk paint alone will probably scratch off.
Can you paint veneer cabinets? You sure can! The key, like for any painted project, is in the prep and choice of primer and paint. Proper cleaning to remove all the grime and dust, sanding the right amount, and using the right adhesion-promoting primer can make a huge difference in the durability of the finish.