In picking any keyed deadbolt lock, two basic tools can be used. The first one is the pick itself, a long and solid piece of metal or plastic that can easily fit in the keyhole and won't easily bend if you push it against something.
One of the most common (and easiest to pick) locks is the pin-and-tumbler, which is a type of cylinder lock. Cylinder locks are used in most deadbolts. When picking a pin-and-tumbler lock, put the tension wrench in the keyhole and turn it as if it was a key.
To unlock a privacy lock you'll need a flathead screwdriver that is small enough to fit into the hole on the doorknob. Insert your screwdriver into the hole and push forward. If your doorknob is using a push-button type privacy lock, then you should hear a loud click and the door will open.
One of the best-known ways to unlock a deadbolt without a key is by using two bobby pins. Start by inserting the closed "looped" side of one bobby pin into the bottom portion of the lock. Use the second bobby pin, broken in half, toward the top of the lock and move it back and forth.
Unfortunately, you can not unlock a deadbolt with a credit card. Credit cards will only work with slanted-latch-style locks. Furthermore, the slant of the latch must be facing you so that you may press it in using your card.
Picking a Locked Bathroom or Bedroom Door Lock
Most interior locksets have a pinhole on the outside knob for emergencies. All you need to pick one of these locks is a single straightened-out paper clip to substitute for the pinhole door knob key. Insert the paper clip into the pinhole and push on it to unlock the door.
Pick-resistant locks have an extra set of tumblers or locking apparatus so that, in effect, the key has to do two things at once. Because of their resistance to manipulation, these locks are also resistant to key bumping. One of the most popular pick-resistant locks is the Medeco.
Take the protective rubber nib off the tip of the bobby pin before straightening it out; this is how you make your lock pick. Then, take another bobby pin and bend the end of it at a 90° angle to make a tension wrench; this is the second thing you need in order to pick a deadbolt with a bobby pin.
In the U.S., there is no single comprehensive law against dual-cylinder deadbolts. Individual cities and states have local property and fire codes that may prohibit the use of dual-cylinder deadbolts. The code may prohibit the use of dual-cylinder deadbolts in some buildings and allow them in others.
Spray the lubricant inside the deadbolt and around the outer edge of the key hole, and place the tip of the drill bit onto the center of the key hole. Pull the trigger on the power drill to spin the drill bit. Gently apply pressure onto the drill to force the drill bit into the key hole.
Generally speaking, deadbolts are sturdy locks that can withstand kick in and other forced entry attempts. However, a door with a deadbolt can still be kicked down if the door itself is not solid. So, to protect your door against kick in, you want to make sure both the lock and door are of high-quality grade.
Deadbolt lock sets usually come with two keys when you purchase them. Some deadbolts do not include keys because of the manufacturer or lock type. To unlock deadbolt locks, you will need to use a knob or a key.
Deadbolts are considered to be secure locks that are difficult to open without a key, especially when compared to a spring-loaded lock, the kind you see in the center of a doorknob. While spring latches can be pushed back manually, deadbolts can't — which is why they're called deadbolts. They're dead, or unmovable.
Deadbolts are thicker and heavier than spring latches, and they are not rounded or angled at the end. They are normally comprised of steel, bronze or brass, and they extend deeper into the door frame–typically about one inch–than spring latches.
Want to know how to break a lock with a hammer? Place your fingers into the shackle loop and pull to create pressure. Once done, start pounding the side of the padlock with a hammer again and again until you successfully bump the lock to open. Reuse the lock if it is still working.
To open a deadbolt without a key, a drill machine is one of the most efficient ways to open the lock successfully and easily. You just need to find a drill machine to unlock the lock if you are ashore out of the house. Just by holding the drill on the lock, you can initiate drilling.
The reality is that nearly every lock can be picked and if not picked, bypassed using some other method. The secret to security is having locks that are extremely difficult to pick and or bypassed. You want a pick-resistant lock that only an expert can get through, and there are plenty of those.