One of the best-known ways to unlock a deadbolt without a key is by using two bobby pins. Start by inserting the closed "looped" side of one bobby pin into the bottom portion of the lock. Use the second bobby pin, broken in half, toward the top of the lock and move it back and forth.
To open a deadbolt without a key, a drill machine is one of the most efficient ways to open the lock successfully and easily. You just need to find a drill machine to unlock the lock if you are ashore out of the house. Just by holding the drill on the lock, you can initiate drilling.
To unlock a privacy lock you'll need a flathead screwdriver that is small enough to fit into the hole on the doorknob. Insert your screwdriver into the hole and push forward. If your doorknob is using a push-button type privacy lock, then you should hear a loud click and the door will open.
You can pick any keyed deadbolt lock with two basic tools. The first is the pick itself, which is a long, rigid piece of metal or plastic that fits easily into the keyhole and won't bend easily when you push it against something.
Unfortunately, you can not unlock a deadbolt with a credit card. Credit cards will only work with slanted-latch-style locks. Furthermore, the slant of the latch must be facing you so that you may press it in using your card.
Take your knife, and at the exact height of the doorknob, insert it between the crack of the door and the doorframe. Probe around until you feel a hunk of metal extruding out of the door—this is the latch, and it should feel springy! Leverage your knife and push the latch into the door.
To bump a lock, a burglar inserts a specially cut key into the lock, then gently “bumps” it with a mallet or a screwdriver. This forces the pins in the lock to the shear line as the key turns and the door opens. The “bump key” required to accomplish this is simple to acquire and can even be ordered online.
Ideal choices include a small screwdriver or hex wrench, a hair pin, or a heavy-duty paperclip. You can even use a bamboo skewer from the kitchen, or a cotton swab with the fluff removed from one end. If using a hair pin or paper clip, first bend it open so you have a long, straight bit of metal.
Start by pulling the bobby pin apart and roughly straightening it as such. Next, stick the straight end of the hairpin about one centimeter, or about 1/3 of an inch, into the keyhole of your lock and apply enough pressure to bend the end of the pin into a hook. The result should look something similar to this.
Generally speaking, deadbolts are sturdy locks that can withstand kick in and other forced entry attempts. However, a door with a deadbolt can still be kicked down if the door itself is not solid. So, to protect your door against kick in, you want to make sure both the lock and door are of high-quality grade.
Picking a Locked Bathroom or Bedroom Door Lock
Most interior locksets have a pinhole on the outside knob for emergencies. All you need to pick one of these locks is a single straightened-out paper clip to substitute for the pinhole door knob key. Insert the paper clip into the pinhole and push on it to unlock the door.
Master key: The master key can open all locks you have in your residential or commercial property.
A magnet cannot entirely unlock a deadbolt.
Picking a lock with paper clips works pretty much the same way as picking a lock with a traditional tension wrench and rake. You just need to turn two paper clips into those two very same tools, and then pick the lock with them like you'd normally do.
Well, deadlocks and deadbolts are the same in that they both need a key to lock. However, while a deadlock can only be unlocked in deadlock mode with a key, deadbolts can be locked and unlocked with a key and have a metal lock that extends from the door into the wall.
A minimum of 10, 75-pound strikes are reported to be the equivalent of over 100 foot pounds, which is why the Grade 1 deadbolt locks have been tested. A really strong criminal would have to kick your door over 100 times in order for it to begin to degrade or show signs of weakness.
Want to know how to break a lock with a hammer? Place your fingers into the shackle loop and pull to create pressure. Once done, start pounding the side of the padlock with a hammer again and again until you successfully bump the lock to open. Reuse the lock if it is still working.