Take your knife, and at the exact height of the doorknob, insert it between the crack of the door and the doorframe. Probe around until you feel a hunk of metal extruding out of the door—this is the latch, and it should feel springy! Leverage your knife and push the latch into the door.
One of the best-known ways to unlock a deadbolt without a key is by using two bobby pins. Start by inserting the closed "looped" side of one bobby pin into the bottom portion of the lock. Use the second bobby pin, broken in half, toward the top of the lock and move it back and forth.
To unlock a privacy lock you'll need a flathead screwdriver that is small enough to fit into the hole on the doorknob. Insert your screwdriver into the hole and push forward. If your doorknob is using a push-button type privacy lock, then you should hear a loud click and the door will open.
Start by pulling the bobby pin apart and roughly straightening it as such. Next, stick the straight end of the hairpin about one centimeter, or about 1/3 of an inch, into the keyhole of your lock and apply enough pressure to bend the end of the pin into a hook.
To open a deadbolt without a key, a drill machine is one of the most efficient ways to open the lock successfully and easily. You just need to find a drill machine to unlock the lock if you are ashore out of the house. Just by holding the drill on the lock, you can initiate drilling.
Unfortunately, you can not unlock a deadbolt with a credit card. Credit cards will only work with slanted-latch-style locks. Furthermore, the slant of the latch must be facing you so that you may press it in using your card.
Picking a Locked Bathroom or Bedroom Door Lock
Most interior locksets have a pinhole on the outside knob for emergencies. All you need to pick one of these locks is a single straightened-out paper clip to substitute for the pinhole door knob key. Insert the paper clip into the pinhole and push on it to unlock the door.
Generally, they consist of a small, semi-rigid piece of 10 gauge steel with an indented end. The device is inserted between a door and the door frame, above the spring latch on outwardly-swinging doors equipped with key-in-the-knob locks. The tool is pulled down and outward, releasing the locking mechanism.
You can pick any keyed deadbolt lock with two basic tools. The first is the pick itself, which is a long, rigid piece of metal or plastic that fits easily into the keyhole and won't bend easily when you push it against something.
Generally speaking, deadbolts are sturdy locks that can withstand kick in and other forced entry attempts. However, a door with a deadbolt can still be kicked down if the door itself is not solid. So, to protect your door against kick in, you want to make sure both the lock and door are of high-quality grade.
What do you Need to Pick a Deadbolt? In picking any keyed deadbolt lock, two basic tools can be used. The first one is the pick itself, a long and solid piece of metal or plastic that can easily fit in the keyhole and won't easily bend if you push it against something.
Want to know how to break a lock with a hammer? Place your fingers into the shackle loop and pull to create pressure. Once done, start pounding the side of the padlock with a hammer again and again until you successfully bump the lock to open. Reuse the lock if it is still working.
The Firefighter Swipe Tool is an alternative way of gaining access without causing damage. Created by an FDNY Firefighter, The Firefighter Swipe Tool's design allows for more versatility and flexibility. The high-strength, bendable mylar makes this tool strong and flexible Quicker entry, less destruction.
Hux bar -- A multipurpose tool that can be used for several forcible entry and ventilation applications because of its unique design. It may also be used as a hydrant wrench.
The Williams Key was developed by a firefighter / door carpenter in urban Los Angeles to gain quick access and make entry to commercial, residential doors, and gates on the scene of an emergency response call. It causes little to no damage and weighs almost nothing.
Ideal choices include a small screwdriver or hex wrench, a hair pin, or a heavy-duty paperclip. You can even use a bamboo skewer from the kitchen, or a cotton swab with the fluff removed from one end. If using a hair pin or paper clip, first bend it open so you have a long, straight bit of metal.