Pipe Rods. This one is a pretty common alternative. Many people turn to copper pipes when they need a substitute curtain rod. Copper pipes have a unique look about them which is what draws many folks toward it, but you can use any style of or look of pipe.
Hanging Outdoor Curtains without Curtain Rods
If this is the case for your patio, consider using heavy-gauge exterior steel wire rope to mount your draperies. Eye hooks and wall anchors can be used to secure one end of the wire to a nearby structure, post, beam or the exterior of your home.
Be sure to wait the required hour to allow the adhesive to bond before hanging your curtains. You can see how wonderful hanging curtains with command hooks worked out! We lived in this home for two years and the command hooks held the curtains the entire time with no issue!
Curtains are a great way to add charm to any home. They can be merely decorative, or they can serve to block out the light. Many landlords don't allow renters to drill holes into walls, which is necessary for installing curtain rod hooks. Fortunately, it is still possible to install curtain rods with Command hooks.
–Command hooks might not stick to textured walls, but you can hang curtains from your ceiling using adhesive broom or mop hooks. These can be found at most hardware or home improvement stores. Just stick the flat base on the ceiling, run a curtain rod through the hook or loop and voila!
Here are a few ways you can use rope for your curtains: Create tension in the rope by tying the ends directly to the curtain rod brackets. You can also use curtain holdbacks to secure the rope further down the wall. Avoid hanging heavy drapery when using rope in place of a curtain rod.
By styling wooden dowels to look like copper rods, the DIY curtain rods were so inexpensive (just $12 apiece!) that we had money left over to craft statement-making tiebacks to match. Measure your window, then cut the 1-inch wooden dowel to a length at least 5 inches longer than your window is wide.
A handheld screwdriver works well for the last few turns. Once you have your brackets attached to the wall, you're ready to hang your curtain rod! It's easiest to thread your curtains on the rod beforehand.
Install Brackets or Adhesive Hooks
Installing the brackets directly onto the headrail eliminates the need for you to drill holes for them in your wall. Most curtain brackets will come with the screws you'll need to install them onto your headrail.
Well, you do NOT need a stud to hang a curtain rod, but you will need a special type of wall anchor to hold the weight. There are two different types I like to use: a drywall anchor or toggle bolts.
DO Hang High
The higher the curtain rod, the taller the window will appear, so fix your curtain rod closer to the ceiling than the top of your window, if you can. One rule of thumb is that they should sit 4-6 inches above the window frame.
Ignore the Weight Restrictions
The large strips can handle a 24-inch to 36-inch object that weighs up to 16 pounds. The smaller hanging strips can only handle up to 4 pounds.
Hanging curtains on drywall is not as simple as it looks. Drywall will not hold a screw because it's not solid. If you mount a curtain rod with a screw, over time you will end up with a sagging curtain and hole. Using drywall anchors is the only solution.
All you need to do is hang a hook on either side of the window and pop a rod it, and you're done! If you want to open and clothes the curtains frequently, you will probably want to secure the rod to the hooks somehow (even some string could work) so that it doesn't slip around.
I recommend using a ceramic round disc magnet 1/8” thick. Simply glue one to the window casing on both sides at the lowest point to which the blind hangs and you should be good to go. You can get these magnets online, or at any home improvement store.