Try using alcohol, vinegar with bicarb soda, or a baking soda paste to remove stains from plastic. Do not rub the baking soda around on the plastic because it is abrasive and will scratch the finish.
Make a solution of water and bleach, using one tablespoon of bleach per cup of water. Let the containers and other items soak in the solution for one or two hours. After the stains are gone, wash the containers thoroughly, rinse, and dry.
WHITE VINEGAR
Due to being a natural food-safe substance, people often prefer vinegar since it's made from organic compounds. Residue from cleaning plastic containers with vinegar could improve your digestion! Vinegar does not harm plastic. It can be used to remove water marks as well.
Rubbing alcohol
If a plastic container has yellowing stains, you can use rubbing alcohol to clean it. Pour the rubbing alcohol into the container and let it sit for a few minutes. If the container can't hold liquid, pour the rubbing alcohol into a separate container and put the plastic container inside.
Coat your yellowed plastic gadget and wrap it. In a nutshell, all you need to do is to coat the plastic (cleaned and dried, of course) evenly with the cream peroxide. Avoid having the cream coming in contact with your skin or eyes, as it can cause burns. As such, I strongly recommend that you use gloves.
Hydrogen peroxide is a very effective stain remover for protein- and plant-based stains. And it works well in treating mildew, blood, fruit and vegetable, and dye-transfer stains.
Sprinkle a light layer of baking soda over the entire surface and let it sit for a long time — at least a couple of hours. It will absorb any excess liquid from the stain removal process, and leave your mattress smelling fresh and clean.
The sweat, urine, and oils on your mattress can all create excess moisture and this is all that mould and mildew need to grow. Similar to other yellow stains, mould can look like small yellow spots covering a specific area of the mattress.
To clean plastic, mix equal parts white vinegar and water in a container. Then, apply the mixture to the plastic and rub it in using a clean cloth or sponge. When you're finished, rinse the plastic off with water.
You'll want to put some dish soap in the container, then add some warm water. Then, tear up a few pieces of paper towel and put them in the container, too. Pop the lid on and shake the container vigorously for 45 seconds to a minute. Then, rinse the soapy water and paper towel out.
Cleaning with Baking Soda
Baking soda not only cleans the plastic but removes the scents of dishes past, often after just one wash. Before working with baking soda, clean the plastic in warm water, not boiling, and dish soap.
Baking soda is a really simple and effective cleaning agent for mattresses. Sprinkle enough baking soda over your mattress to cover it in an even layer. For minor odors, leave the baking soda to sit for at least half an hour. However, the longer you leave it, the more it absorbs moisture and odor-causing particles.
Baking soda and baking powder are not the same. Sodium bicarbonate and bicarbonate of soda are other names for baking soda. Baking powder is made of baking soda plus cream of tartar and cornstarch. Baking powder can be substituted for baking soda by tripling the amount of baking powder.
For very light or fresh stains:
Fill a spray bottle with hydrogen peroxide. Lightly spray the stain with peroxide, and blot it away with a dry towel. Repeat until the stain is gone. Let the mattress dry completely before remaking the bed.
Rubbing alcohol will do an effective job of removing certain stains such as ink and oil from the clothes. However, in the process, it can also loosen and remove the fabric dye.
Saturate set-in stains with vinegar, then rub the spot with a paste made from equal parts vinegar and baking soda. You can add a couple of tablespoons each of vinegar and laundry detergent to a bucket of water and soak the garment overnight if the stain persists. Then, rinse and wash.
Using Peroxide to Clean Yellowed Plastic
Pour straight peroxide in a container. Put the plastic in the container. Allow the plastic to soak in the sunlight until the stain lifts. Rinse and dry.
When it comes to reducing the germs in your home and containing the spread of coronavirus, hydrogen peroxide is a good option to use on inanimate surfaces like metal, glass, and plastic, says Alex Berezow, PhD and vice president of scientific communications at the American Council on Science and Health.
Whitening process. The reverse process uses commonly available 6% or 12% hydrogen peroxide and UV light as catalyst (can be common UVA bulb or even simple sunlight) to activate the whitening reaction. Ultraviolet light bombarding hydrogen peroxide generate very active hydroxyl and restore the original color.
The plastic and glass surfaces on most small kitchen appliances, such as blenders, coffee makers, and toasters, are safe to clean with vinegar, but you want to avoid any rubber parts or metal that vinegar can corrode.
Does Vinegar discolor plastic? In fact, you can use the same ratio as for a bleach and water solution, with one tablespoon vinegar per cup of water. … Lemon, vinegar, and baking soda are all organic cleaners that will lift discoloration from plastic.
Baking Soda And Vinegar
Although mixing vinegar and baking soda is not considered dangerous, you should still avoid mixing these in a container. Vinegar is acidic and basic soda is basic, so the by-products are sodium acetate, carbon dioxide, and water that are not toxic.