White vinegar The mild acid can dissolve limescale and disinfect. All you need to do is pour a generous amount of white vinegar down your toilet bowl, let it soak in overnight, then scrub with a brush. Then flush to rinse, and voilà, your toilet is back to its former whiteness!
To remove black stains from a toilet bowl, start by soaking up the water at the bottom of the bowl using a cloth. Prepare a vinegar and borax or baking soda paste and apply it all over the stains. Wait for about 30 minutes and scrub off the stains using a toilet brush.
That black substance that keeps seeping into your toilet is usually bacteria that's clinging to waste in your drain lines. This bacteria tends to grow and spread over time, particularly because the matter that goes down these drains is organic in nature, providing a food source for the bacteria to live on.
Pour a half-cup of bicarbonate soda in the bowl, and let it sit there for 15 minutes. “Apply white vinegar on top of the baking soda. This causes a fizzing effect that activates the acids and can dissolve even the most stubborn limescale buildups. After about 10 minutes, use a scouring sponge to scrub the toilet bowl.
Professional cleaners often use the same household supplies as you would: toilet-bowl cleaner (or bleach), disinfectant wipes, rubber gloves, as well as a nonscratch scrub sponge, a microfiber cloth, or paper towels. A handheld scrub brush or a pumice stone can get to especially tough stains.
Get rid of toilet rings with magic erasers
Cut off a quarter of a magic eraser and drop it into the toilet water. Let the piece sit in your toilet overnight to work its… well, magic! Do not flush the magic eraser down the toilet ! Remove it in the morning, then flush to rinse away any residue.
To control black mold in toilets, clean the bowl thoroughly and spray chlorine bleach into the bowl and under the bowl rim. Also add ¼ cup of bleach to the toilet tank. Let the bleach stand for 15 to 20 minutes.
Although this nuisance means more scrubbing the toilet bowl (more on the best pro cleaning tricks below), there's a chance it's also a clue you should get your blood sugar checked. As strange as it sounds, frequently seeing mold in your toilet could be one of the first signs of diabetes.
While it can be put to a number of helpful uses around the home, WD 40 is particularly good at softening rust and limescale deposits in the toilet (and bathroom). All you have to do is spray it on the desired section of the toilet, wait a few minutes, then scrub it away with a toilet brush.
So, which one should you go for? It really depends on what kind of cleaning you need to do. If you're dealing with really tough, built-up mineral deposits, especially in your bathroom or kitchen, CLR might be the way to go. It's strong enough to handle stains that vinegar might struggle with.
Test on a hidden area before applying to the entire surface and apply directly to the stain with a brush, cloth, or sponge and let soak for 2 minutes. Rinse promptly with cold water. Never leave Calcium, Lime, and Rust Remover on an area for longer than two minutes or mix with other household cleaners or bleach.
Always wear gloves when cleaning with vinegar to protect your skin from the acid. A special tip: Coca Cola – this fizzy drink contains phosphoric acid which also removes limescale and urine scale.
When it comes to being good for the environment, CLR has a slight advantage. It's biodegradable and part of the EPA's Safer Choice Program, which recognizes products with safer ingredients. Lime Away works well, but it doesn't have the same environmental certifications.
Pour undiluted white vinegar into your toilet bowl, making sure you get it up under the rim where limescale often gathers and cover every part of the surface. Leave it for three to four hours and then scrub it with a brush. Repeat if necessary.
We recommend using a mixture of ¼ cup of vinegar for every 1 cup of water. This ensures your toilet tank is being disinfected without causing damage, which the use of bleach or chemical cleaners can do.
It's essential to clean the inside of a toilet tank to remove mineral deposits that can damage or interfere with the toilet's operation. Baking soda will absorb odors, break down stains, and dislodge fungal growth with its abrasive power.
Bon Ami, Bar Keepers Friend, and The Pink Stuff are mild abrasives that are particularly effective at removing mineral and rust stains from hard, nonporous surfaces. While mineral deposits are usually the culprit when unsightly rings form in a toilet bowl, bacterial formation is also common.
Don't Use Them On Your Car
Or any other delicate surface, for that matter, like silverware, glass, or metal surfaces. Dry erasers have the abrasiveness of a 3000 grit sandpaper – very fine, but can still mar shiny surfaces – like your stainless steel appliances!
The carbonic acid that is in coke is what helps to clean toilet stains. Picture the acidity slowly working its way through the stains, melting them away.
Essential Supplies for Bathroom Cleaning
All-purpose cleaner: For countertops, sinks, and surfaces. Glass cleaner: Ensures mirrors and glass are streak-free. Disinfectant spray or wipes: Perfect for sanitizing high-touch areas. Toilet and shower cleaners: Removes stains, bacteria, and soap scum.
Avoid using cleaner tabs—they often contain bleach, which is a no-no for cleaning toilet tanks because of bleach's corrosive properties. Add a cup of white distilled vinegar to the tank once a month. Leave it to sit overnight and then flush it in the morning. Check for sediment buildup and staining every month or so.