Bleach can also be used to effectively removes germs, mold and mildew from your pool inflatables. All you need to do is mix 1 tablespoon and 1 gallon of water, then brush it on the toy or float and let it sit there for a few minutes. Wipe it down and dry it completely.
The bleach recommended for pools is chlorine. If you don't want to keep emptying and refilling your small inflatable pool often, this is an option. But, use the right amount of chlorine bleach for pool sanitization.
Vinegar to Remove Mildew
Drain the wading pool completely. Pour distilled white vinegar into a bucket. Saturate a sponge in the vinegar, and then scrub the wading pool down with the sponge. Continue saturating the sponge and scrubbing the pool until all mildew as been removed.
Dump or drain the water, then wipe down the empty pool with a solution of bleach and water (read the label for cleaning ratios) , wearing rubber gloves while cleaning. Or, use gentle dish detergent to cut through the dirt. Rinse thoroughly to remove any bleach or detergent.
Chlorine In Small Inflatable Pools
For small inflatable pools that you don't want to empty and refill so often, you can add a small amount of bleach to the water to sanitize it. Add about a 1/4 tsp for every 10 gallons of water, or for medium sized inflatable pools, add 2 1/2 tsp for every 100 gallons.
If a kiddie pool's water isn't going to be changed regularly, disinfecting it makes sense, and bleach will work well in that regard. Add only enough bleach to a kiddie pool to maintain chlorine between 1 and 2 parts per million (PPM), and test to ensure proper levels.
To keep the pool clean without a filter, it is necessary to use chlorine with a flocculant or to use a flocculant chemical. This product groups the impurities that float in the water, causing them to fall to the bottom of the pool so that they can be removed later with a cleaner.
Inflatable kiddie pools are also small enough to be emptied and cleaned after each use. Dump or drain the water, then wipe down the empty pool with a solution of bleach and water (read the label for cleaning ratios). Make sure you're wearing rubber gloves while cleaning.
Mix a 50/50 solution of vinegar and water, dip a sponge or soft cloth into it, and scrub that residue away. It's OK if a little bit of it makes it into the pool water, but if you're concerned, test the water after using vinegar, and adjust any levels if necessary.
Salt is often presented as a healthier alternative to adding chlorine to a kiddie pool, since saltwater is gentler on the skin.
Not ideal. More importantly, however, Tim points out that 'there is little evidence or scientific proof to show that Epsom Salts acts as a disinfectant, which could leave harmful bacteria lurking in the paddling pool, even after cleaning has taken place.
It is important to know what exactly bleach is before you put it in your pool. Household bleach, Clorox and liquid chlorine can all be used to sanitize a pool. They are all types of chlorine. Household bleaches such as Clorox usually contain about 5-6% available chlorine, about half that of pool liquid chlorine.
Method 2: Using Vinegar Solution
Begin by mixing one portion of white vinegar and two parts of clean water in a spray bottle. When the solution is prepared, spritz your inflatable and use your sponge to scrub off all the dirt. Then, rinse your floaty with a hose and sit it out in the sun to dry.
I think the answer to your question is about 3-6 days. The problem is that the chlorine that you need to keep the bacteria in check is used up more quickly as the temperature rises, the activity increases, and as sweat and other body stuff is put into the pool.
Skimmer Net
With excessive debris in the water like leaves, pine needles, and dirt, the pool walls will get slimy and grow mildew faster.
Vinyl liners can rip, so you'll want to make sure that you use a brush that is compatible and that you don't use excessive force. For simple stains, apply a mild cleanser directly to the liner and then scrub it with your pool brush or a soft cloth. You can pick up various speciality cleaners from your local pool store.
For most inflatable pools or plastic kiddie pools following the guidelines listed above, the water should be changed every two weeks at a minimum. If you are not adding chlorine to kill bacteria, drain the pool every other day. Stagnant water without chlorine can become unhealthy water in as little as 24-48 hours.
For the greatest protection against algae, bacteria, and cloudy water, Intex pools should maintain a chlorine level of 2.0-4.0 ppm at all times. If you opted for the Intex Salt Chlorinator, you can make your own chlorine by adding the correct amount of Pool Salt to the water.