First you can try to empty a can of coke in the toilet and let it sit for a few hours. The acid in the coke will eat away at the stain as much as possible. You can also try scrubbing with a pumice stone or even better drop a few Alka Seltzer tablets in the bowl and watch the fizzle work.
A: The tablet takes a long time to dissolve. It dissolves a little bit with each flush as its working. So flush after flush after flush it will dissolve, but it will take a couple of months, give or take, depending on how much you use the toilet.
Best trick, use your toilet brush to push the water down the drain. Takes a few well timed swishes. Then toilet duck or the blue Lysol cleaner. Let it sit 10 mins. Toilet brush. If it's bad use clr instead of cleaner first. flush a bunch before doing another cleaner. The use toilet duck.
While they may seem like the perfect way to clean and sanitize your toilet, the reality is that they're quite harmful to it. Those blue toilet tablets can cause corrosion to parts inside the tank and contain harmful chemicals that may be released into your home and the environment.
Vinegar and Baking Soda: - Pour about 2 cups of white vinegar into the toilet bowl. - Add 1 cup of baking soda. - Let the mixture sit for about 30 minutes to an hour, then scrub with a toilet brush and flush. Commercial Limescale Remover: - Use a product specifically designed to remove limescale.
White vinegar
The mild acid can dissolve limescale and disinfect. All you need to do is pour a generous amount of white vinegar down your toilet bowl, let it soak in overnight, then scrub with a brush. Then flush to rinse, and voilà, your toilet is back to its former whiteness!
White vinegar is an effective cleaning solution, especially when combined with an abrasive material like table salt. For stubborn stains, sprinkling baking soda or borax onto the vinegar mixture will help. Lemon juice is another ingredient that dissolves blue-green stains and will also leave a fresh scent behind.
Cleaning your toilet tank is a very quick and easy procedure. We recommend using a mixture of ¼ cup of vinegar for every 1 cup of water. This ensures your toilet tank is being disinfected without causing damage, which the use of bleach or chemical cleaners can do.
But flushing your meds poses other problems. Flushing pills down the toilet can be a water quality issue because wastewater treatment plants are not equipped to remove pharmaceuticals from the wastewater. Those medications could affect the environment and endanger public health.
Extensive use of bleach tablets can harm your toilet and pipes.
Blue stains often occur in areas where the water is highly acidic and contains elevated levels of copper. Unfortunately, cleaning the toilet bowl once won't stop the stains from coming back since the water keeps flowing.
You may put the tablet(s) in water for a few minutes to soften the tablet. If the tablet does not dissolve fully after a few minutes, use the spoon to crush the tablet and stir the mixture, so as to make sure that it is fully dissolved or uniformly mixed.
Avoid using cleaner tabs—they often contain bleach, which is a no-no for cleaning toilet tanks because of bleach's corrosive properties. Add a cup of white distilled vinegar to the tank once a month. Leave it to sit overnight and then flush it in the morning. Check for sediment buildup and staining every month or so.
Just let water run through the water flow. The tablet will eventually dissolve. Try to prop the flapper valve open a bit and just let the water flow.
The noted sixteenth-century Swiss alchemist Theophrastus Bombastus von Hohenheim, better known as Paracelsus, introduced laudanum, a tincture of opium made from poppy flower extracts that contained all of the alkaloids found in the poppy plant. Laudanum was recommended for pain control [4].
Do not flush medicines down the sink or toilet unless the prescription drug labeling or patient information that accompanied the medicine specifically instructs you to do so.
How Chlorine Tablets Ruin Toilets. When dropped into your toilet's tank, the chlorine cleaning tablet slowly dissolves, and the sitting water and caustic materials interact with the plastic and rubber parts, such as the gaskets and washers. These parts are highly susceptible to corrosion and wear.
They either dump the entire bottle directly into the toilet tank, or cut a hole at the bottom of the bottle and place it inside the tank. The idea is that whenever they flush, the toilet bowl itself will fill up with the sweet smell of Fabuloso, negating any unsavory scents that might otherwise be lingering.
Vinegar is great for removing hard water deposits, soap scum, and other build-up from many surfaces in your home, including your toilet. When used correctly, it can be a safe and effective cleaning agent. However, leaving vinegar in the toilet overnight may not be the best idea.
Who knew that dishwasher tablets could help keep your toilet sparkling clean? Just drop a dishwasher tablet in toilet bowl and let it sit for 10-15 minutes. Then, use a toilet brush to scrub the bowl and flush it. The tablet will help to break down any stains or buildup in the bowl, leaving it fresh and clean.
Blue or green stains
This signifies copper stains which can be caused by copper pipe corrosion or by a high amount of copper in your water.
Clean the grime off your tub, shower or tiles
You can also combine Dawn with vinegar for stronger cleaning power, especially when tackling hard water stains. Just combine them in a spray bottle, spray down your tub or shower and let it sit for a few minutes, then scrub it down.
This discoloration is surprisingly difficult to remove–a regular cycle with bleach is usually not enough. Instead, try presoaking with ¼ cup Clorox® Disinfecting Bleach added to 1 gallon of water for 5 minutes, and then machine wash the items again.