The only way to lower stabilizer levels in your pool is to remove some of the water and add clean water. Once you do that, you'll have to balance all your chemicals again.
Adding Stabilizer
In general, about 13 ounces of granular stabilizer will raise the CYA level of 10,000 gallons of water by 10 parts per million. Add the stabilizer to the skimmer basket while the pump is running, and keep the pump running for 24 hours after you add the stabilizer.
If it is too low, you would add an alkaline material, typically sodium carbonate or sodium bicarbonate. They will usually be labeled pH up or increaser and ph down or decreaser. Stabilizer - if it is too low, you add cyanuric acid.
Because of the importance of stabilizer, there are unfortunately no alternatives. If you stopped using it, you would continually struggle with chlorine levels, bacteria, and algae. We understand that all the chemicals needed to keep a pool looking healthy can add up and become costly.
Baking soda, also known as sodium bicarbonate is naturally alkaline, with a pH of 8. When you add baking soda to your pool water, you will raise both the pH and the alkalinity, improving stability and clarity. Many commercial pool products for raising alkalinity utilize baking soda as their main active ingredient.
Pool stabilizer is also known as pool conditioner, chlorine pool stabilizer, chlorine stabilizer, or Cyanuric Acid. And you can buy this chemical additive as either liquid or granular (powder). It's also included in chlorine tablets or sticks (called trichlor) or shock (called dichlor).
When to Add Chlorine Stabilizer
The product is typically added to the pool when it is first opened for the summer season. Open your pool under normal procedures, and let the filter run with its normal amount of chemicals. When all the other chemicals, such as chlorine.
The addition of a cyanuric acid stabilizer to pool waters treated with chlorine is necessary to protect the active life of chlorine and its derivatives in the waters from the damaging effects of the sun's ultraviolet (UV) rays. When exposed to UV rays, chlorine evaporates rapidly.
There are two methods you can use to dissolve stabilizer into your pool water. You can either add the stabilizer to a pool skimmer box sock and hang the sock in front of the return jet or place it in the skimmer box. Or you can simply mix it in a bucket of water first and dump it into the skimmer box.
Pool stabilizer is also sometimes called pool conditioner, chlorine stabilizer, or cyanuric acid (CYA). Its purpose is to stabilize the chlorine in your pool water, so the sanitizer lasts longer. This will ultimately help keep your water clean for a longer period of time.
Borax is tremendously effective at stabilizing alkalinity and acting as a pH buffer in swimming pools.
Cyanuric acid, also called stabilizer, is commonly used in outdoor pools to reduce photodecomposition of available chlorine. When added to pool water, a fraction of the cyanuric acid (H3Cy) ionizes to form cyanurate (H2Cy-). The fraction that ionizes is pH-dependent.
Never add chemicals at the same time, whether you're balancing the water, shocking the pool, or adding a specialty chemical. For most water balance changes, the pump needs to run on the high setting for at least four hours before you can add another chemical or retest the water.
Pool stabilizer is made from cyanuric acid (CYA). CYA slows down how quickly chlorine evaporates so that chlorine will stay in the water longer. CYA works by binding to chlorite ions in chlorine and protecting them from UV ray damage.
To test pool stabilizer levels, buy some test strips or a quality liquid test kit and apply them to the water once a week. Usually, you can dip a test strip in the water, wait for it to react to the chemicals in your pool, and check if the colors match the color chart on the box.
Cyanuric acid, or CYA as it is commonly called (and also called pool stabilizer, pool conditioner, or chlorine stabilizer), acts as that buffer, protecting your chlorine from those hungry UV rays.
Vinegar contains acetic acid which makes it a great disinfectant. It is also acidic in nature hence removes dirt, grease and mineral deposits. If used in the right amount, its acidic nature also plays a role in lowering the pH of pool water.
Optimizer is a new and unique product that “optimizes” the performance of the chemicals in your pool water, suppresses algae growth, and makes swimming more comfortable for your skin and eyes, all at the same time. Few products can offer so many benefits all at once.
Correct levels of chlorine stabilizer (Cyanuric Acid or CYA) will protect chlorine from the sun, and will slow the natural degradation of chlorine.
Why can't I get a Chlorine reading? If you test your pool water and can't get a chlorine level reading at all it may be due to very high chlorine demand. High chlorine demand is the inability to keep an adequate level of chlorine in the pool water even though the water appears to be balanced and properly maintained.
"Shocking” refers to the process of adding chlorine or non-chlorine pool chemicals to the water in order to raise the "free chlorine” level. The goal is to raise this level to a point where contaminants such as algae, chloramines and bacteria are destroyed.
Slowly add BioGuard Optimizer into your pool skimmer with the pump and circulation system on. Allow pool water to circulate for 4-8 hours after application. Do not pour BioGuard Optimizer into a skimmer if circulation is not evident in the skimmer. Do not directly combine BioGuard Optimizer with any other product.
What is in the new Optimizer? Optimizer contains boric acid, a more pH neutral than other boron-containing products like sodium tetraborate pentahydrate.
Using baking soda will not actually lower your pool's chlorine level. If your ph is way too low it may. Prevent corrosion and damage to pool equipment; To raise your ph levels, it can be as simple as adding seven to nine pounds of baking soda to your pool water.