Dump or drain the water, then wipe down the empty pool with a solution of bleach and water (read the label for cleaning ratios) , wearing rubber gloves while cleaning. Or, use gentle dish detergent to cut through the dirt. Rinse thoroughly to remove any bleach or detergent.
The bleach recommended for pools is chlorine. If you don't want to keep emptying and refilling your small inflatable pool often, this is an option. But, use the right amount of chlorine bleach for pool sanitization. The standard measurement is a quarter teaspoon for 10 gallons.
When chlorinating wading pools, use 1/8 cup per 100 gallons of new water. Mix required amount of Clorox® Regular Bleach2 with 2 gallons of water and scatter over surface of pool. ... (Clorox® Regular Bleach2 will not harm plastic pools.) Do not reenter pool until the chlorine residual is between 1 to 3 ppm.
Chlorine In Small Inflatable Pools
For small inflatable pools that you don't want to empty and refill so often, you can add a small amount of bleach to the water to sanitize it. Add about a 1/4 tsp for every 10 gallons of water, or for medium sized inflatable pools, add 2 1/2 tsp for every 100 gallons.
Depending on how much you have added and the size of your pool, it is generally safe to wait about 4 hours after adding liquid chlorine or until levels reach 5 ppm or lower.
Method 2: Using Vinegar Solution
Begin by mixing one portion of white vinegar and two parts of clean water in a spray bottle. When the solution is prepared, spritz your inflatable and use your sponge to scrub off all the dirt. Then, rinse your floaty with a hose and sit it out in the sun to dry.
For most inflatable pools or plastic kiddie pools following the guidelines listed above, the water should be changed every two weeks at a minimum. If you are not adding chlorine to kill bacteria, drain the pool every other day. Stagnant water without chlorine can become unhealthy water in as little as 24-48 hours.
Use 1 part bleach to 20 parts water. Soak your rag in the solution and wipe the pool clean. Avoid using paper towels when using a bleach solution to clean the pool. They won't hold up very well and will just create a bigger mess for you to clean up.
You can use either a chlorinated product or a non-chlorine shock oxidizer to break down combined chlorine in the water. Shocking the pool can also remove excess bather waste and visible algae. Shocking should be done when combined chlorine levels exceed 0.5 ppm.
Dilute ½ cup of household bleach (5.25%–8.25%) in 1 gallon of room-temperature water. Do not use “splash-less” bleach. Apply bleach solution to all surfaces.
To keep the pool clean without a filter, it is necessary to use chlorine with a flocculant or to use a flocculant chemical. This product groups the impurities that float in the water, causing them to fall to the bottom of the pool so that they can be removed later with a cleaner.
It is important to know what exactly bleach is before you put it in your pool. Household bleach, Clorox and liquid chlorine can all be used to sanitize a pool. They are all types of chlorine. Household bleaches such as Clorox usually contain about 5-6% available chlorine, about half that of pool liquid chlorine.
Other chemicals
Bromine — considered a safe substitute for chlorine. Looks for BCDMH tablets, which are typically 66% bromine and 27% chlorine. If unable to find, you can use just bromine but it may leave the water a dull green color. PHMB — Chemical compound named polyhexamthylene biguanide.
After you shock the pool — As soon as your chlorine levels reach 5 ppm or lower, it's officially safe to swim. Depending on the type of shock used, as well as the amount used, it can take anywhere from 24 hours or even up to a couple of days.
Clorox itself recommends using between 100 and 200 ounces of regular-strength bleach per 10,000 gallons of pool water -- one gallon is 128 ounces, and many bottles of bleach are available in one-gallon or half-gallon sizes. Pool professionals tend to recommend more conservative amounts of bleach.
Baking soda will raise the total alkalinity of the water. The alkalinity keeps the pH stable which then allows the bleach to remove more bacteria and contaminates. About a 1/2 of a teaspoon of baking soda will treat 26 gallons of water.
For the greatest protection against algae, bacteria, and cloudy water, Intex pools should maintain a chlorine level of 2.0-4.0 ppm at all times. If you opted for the Intex Salt Chlorinator, you can make your own chlorine by adding the correct amount of Pool Salt to the water.