One of the easiest ways to break a padlock is with a hammer. Start by inserting 2 fingers into the padlock's shackle loop and pull up on the shackle to create tension. Then, tap the side of the lock that contains the fixed end of the shackle with a hammer using quick, short strikes.
First, you need to put your two fingers between the shackles. Second, you need to hold the shackle by pulling it away from the body. Third, you need to hit the fixed end where the shackle and its body meets. Fourth, with medium force, hit it with the hammer repeatedly until the body releases the shackle.
Turns out, any Master Lock can easily be broken into with just a small hammer. As this video illustrates, all you need to do is tap the side of a Master Lock with a hammer to get it to open, no key, no combination required.
To unlock a privacy lock you'll need a flathead screwdriver that is small enough to fit into the hole on the doorknob. Insert your screwdriver into the hole and push forward. If your doorknob is using a push-button type privacy lock, then you should hear a loud click and the door will open.
Yes, bolt cutters are an effective tool you can use to cut off a lock. Choose a pair of long-handled bolt cutters and place the shackle between the blades. Squeeze the grips of the bolt cutters together until they cut through the shackle. Then, simply remove the lock.
To do this, unfold the large edge of your paperclip twice until a straight portion juts out. You will be inserting the straight part into the lock to use as a pick. Some locksmiths also put a tiny upward bend into the tip of the pick. This is to depress the pins inside the lock but is not strictly necessary.
Turn the key counterclockwise to free the shackle.
Most key locks will unlock when you turn the key counterclockwise, although this may not always be the case. Turn your key back and forth if turning it clockwise doesn't open it. You'll feel the shackle disengaging in the lock when you've unlocked it successfully.
Bump keys are specially cut keys that can bypass the security mechanisms built into traditional pin and tumbler locks. Bump keys are also referred to as “999 keys” because all of their ridges are cut to the maximum depth (999) in a key-making machine.
Ideal choices include a small screwdriver or hex wrench, a hair pin, or a heavy-duty paperclip. You can even use a bamboo skewer from the kitchen, or a cotton swab with the fluff removed from one end. If using a hair pin or paper clip, first bend it open so you have a long, straight bit of metal.
A1: Some padlocks, especially those for outdoor use, may have a tiny hole in the side of the cylinder slot. One of its functions is to keep the padlock mechanism unaltered over time, expelling water which could stagnate due to excessive humidity or freeze inside the padlock at low temperatures.
A hammer. As rudimentary as it may seem, a hammer to the door handle can be an effective way of gaining entry, This technique takes a bit more muscle and a trip to the hardware store for a new handle ($10). Bash that sucker down until the screw mechanism breaks on the inside.
Twist the key to fasten the metal lock pins into place. Remove the keyhole lock key. The keyhole lock remains in place and prevents unwanted visitors who may have keys to your residence from entering. Purchase a keyhole lock at your local home-supply store.
This might sound complicated but removing the handle is actually pretty simple. Insert a thin paper clip or firm wire through the hole. Then, while holding the doorknob, press the paperclip or wire in to spring the detent.
1: Use a rope, power cord, or belt to tie the doorknob to a nearby heavy object. 2: Tape a broom handle perpendicular to the door frame, tying the handle to the doorknob to hold the door shut. 3: If applicable, secure a belt around the top of the door hinge.
To fix such problems, apply a light lubricant, such as machine oil, to the inside of the lock. While many people will try WD-40 for this purpose, locksmiths recommend a silicone- or Teflon-based lubricant that will better protect the lock from future problems.
Insert a pair of scissors into the hole of the lock as deeply as you can. The blades should be thin enough to fit into the whole of the lock. ... Turn the scissors counter clock wise, from left to right, once the scissors are deeply inserted into the lock. Shift and move the scissors around until the lock is opened.