White vinegar and water, another common household cleaner, can also be used on mildew. For brick pavers that get a greenish or blackish hue from moss and lichen, damp shady environments, or water run-off, the BIA recommends bleach and water (mixed with a one-to-one ratio) or commercially available biocide treatments.
There are useful tools for cleaning paving stones, such as joint scrapers, sweepers, and pressure washers. In addition, pavers can be cleaned with a small pickaxe, broom, and garden hose.
Scrubbing With Borax
For regular cleaning of brick patios, you can opt for a milder cleaning solution. Mix one tablespoon of borax with a gallon of warm water. Pour the solution on the brick and scrub with a stiff brush.
Fill up a gallon sized bucket with water and add about 16oz of dish detergent. Mix the soap into the water thoroughly. Once your cleaning solution is ready, gently pour some onto your paver surface, working in small areas at a time. There are also specific cleaning solutions.
SOAK WITH BAKING SODA
Since it's a natural cleaning agent, baking soda is one of the safest materials you can use to remove oil stains. Pour baking soda on the stained spot, then add a bit of warm water. You can add some detergent or white vinegar for a stronger vinegar solution.
It is common to mix bleach with water; however, you can also add other ingredients to make it more effective. Similar to cleaning pavers with muriatic acid, avoid an intense concentration of bleach, as it can damage the pavers.
Cleaning brick pavers
Cleaning pavers with vinegar is a great way to get rid of stubborn moss, algae and stains on brick.
The acid content in vinegar is particularly good at breaking down the molecules in clay surfaces. Standard bricks are made mostly from clay, so exposure to undiluted vinegar will quickly result in discolouration and a sticky chemical byproduct coating your bricks.
To clean paver slabs, you can use a detergent, such as Dawn, or a vinegar-water solution that is gentle enough to effectively clean without causing damage to your concrete pavers.
Use a specialist cleaner
Try a specialist cleaner like Wet & Forget, at Walmart, which you spray onto the surface of the paving and leave. It can also be used on steps, fountains, patio umbrellas and other smaller outdoor areas. It's bleach-free and non-acidic but will remove mold, moss and grime without any scrubbing.
Can you power wash pavers? Power washing (also known as pressure washing) is also a very effective method by which you can remove dust deposits and various stains from your pavers. Just make sure that the water jet is not directed directly at the joints between the paving stones.
Vinegar (For Basic or Interior Cleaning): Alternatively, some people skip the dish soap and mix a solution with equal parts vinegar and water, then pour it into a spray bottle. This solution can be surprisingly effective at removing basic stains from brick.
If your deck is made from concrete, pavers travertine, brick, stamped concrete or composite decking, you can clean and refresh it for summer using OxiClean™ Versatile Stain Remover.
Although bleach is great at the whitening effect, you can use peroxide to achieve this. Hydrogen peroxide is an oxygenated bleach. It is safe for plants, so when you rinse this solution, it won't harm anything. It works together with the dish soap and baking soda to remove dirt and whiten dirty concrete.
Try Concrete Stain
The simplest path to reviving tired pavers is to apply an acrylic-based semitransparent concrete stain, such as Behr Premium Semi-transparent Concrete Stain ($27/gal.; Home Depot) or Valspar Semi-transparent Concrete Stain ($28/gal.; Lowe's).
A dish soap, like Dawn, is a safe place to start. The surfactants in dish soaps are designed to remove oil and grease, they're gentle enough to be used without issue on your pavers. In a bowl or bucket, mix the soap with water and pour it onto the stain and agitate. Rinse and repeat if needed.
The phenomenon of efflorescence occurs when water soluble salts migrate to the surface of the paver with the help of water (i.e., condensation, rain). Once the mixture of water reaches the surface, it mixes with the carbon dioxide in the air and creates a white haze/film that covers the pavers.
WD-40 may remove paint stuck to brick if applied directly and in large quantities, allowing it to sit on the surface for a few hours.
Cleaning bricks with vinegar is an effective and natural way to remove dirt and stains. However, it is essential to follow proper techniques to ensure the brick surface's safety and achieve the best possible results.