Pipe Rods. This one is a pretty common alternative. Many people turn to copper pipes when they need a substitute curtain rod. Copper pipes have a unique look about them which is what draws many folks toward it, but you can use any style of or look of pipe.
Be sure to wait the required hour to allow the adhesive to bond before hanging your curtains. You can see how wonderful hanging curtains with command hooks worked out! We lived in this home for two years and the command hooks held the curtains the entire time with no issue!
A handheld screwdriver works well for the last few turns. Once you have your brackets attached to the wall, you're ready to hang your curtain rod! It's easiest to thread your curtains on the rod beforehand.
If there isn't a stud, you need to use a drywall anchor and a screw to reinforce your curtain rod brackets. Without a drywall anchor, a screw won't be able to hold the weight of your curtain rod. You risk pulling the brackets out of the wall and causing further wall damage.
Hanging curtains on drywall is not as simple as it looks. Drywall will not hold a screw because it's not solid. If you mount a curtain rod with a screw, over time you will end up with a sagging curtain and hole. Using drywall anchors is the only solution.
Hanging Outdoor Curtains without Curtain Rods
If this is the case for your patio, consider using heavy-gauge exterior steel wire rope to mount your draperies. Eye hooks and wall anchors can be used to secure one end of the wire to a nearby structure, post, beam or the exterior of your home.
Reusing them is as easy as applying a Command™ Refill Strip, so you can take down, move and reuse them again and again! Great for installing curtain rods or hanging wall décor, coats, and bags! Use with rod diameter less than 5/8 in, length less than 48 in, and finial greater than 3/4 in.
But don't get discouraged — you can hang curtains in an apartment! There are simple and affordable solutions you can use to put up curtains without damaging your walls. Learn how to hang curtains in an apartment and salvage your security deposit: Command hooks.
Install Brackets or Adhesive Hooks
Installing the brackets directly onto the headrail eliminates the need for you to drill holes for them in your wall. Most curtain brackets will come with the screws you'll need to install them onto your headrail.
Place the Command hook against the wall where you want it to go, then trace the top, bottom, and side edges with a pencil. Place all of the hooks 4 to 6 inches (10 to 15 cm) above the frame. Keep 2 hooks 3 to 6 inches (7.6 to 15.2 cm) outside the frame, and 1 hook in the middle to ensure central loading of the weight.
Cut your drop cloth at the correct height and width plus 1" on each side for the hem. For each cut side, place hem tape the entire length of the cut along the edge. Remove the tape backer, fold the side over along the tape and iron in place. Hang your curtains on the rod using ring clips.
You'll need to use plastic wall anchors to provide proper support if you're installing in drywall. Fasten the brackets to the walls using your drill or screwdriver. Having a hand tool ready often makes this job easier, since it can be hard to use a larger electric drill when mounting curtain rod hardware to the wall.
Use longer screws or nails
The best way to do this is to install the brackets with longer screws or longer nails. The extra length helps distribute the weight of the curtains further into the plasterboard, making it the joint sturdier than the screws used in traditional window installation.
Well, you do NOT need a stud to hang a curtain rod, but you will need a special type of wall anchor to hold the weight. There are two different types I like to use: a drywall anchor or toggle bolts.