Remove the temporary hold: Once you have found the current temperature setting, you should see an indicator that shows a temporary hold or override. This indicator may be a flame symbol or a clock symbol with a plus or minus sign. Press the appropriate button or use the arrows to remove the temporary hold.
By pressing “Hold”, your thermostat will lock in the temperature it's currently at until you change it again. When you are ready for your normal schedule to resume, simply press the “Run” button and return to your typical programming.
If your thermostat is on a hold setting and you wish to remove the hold, simply check for “Cancel,” “Run,” or “Run Schedule.” Depending on your thermostat model, the specific run button you need will be labeled differently.
Although there might be slight differences depending on the manufacturer, in general the “hold” button is used to lock in a specific temperature, regardless of whatever program you might have set for your system. For instance, you might have your furnace set to keep your house at 68 degrees during the winter.
For the Honeywell Home app: Select the thermostat, press the Schedule icon, choose Options, then Turn Schedule Off. For the 8000 series thermostat: Press the "Sched" button, select "Edit," choose the days and period to clear, then select Cancel Period to clear the schedule.
If your thermostat is stuck, the first thing you should do is make sure your system isn't locked. Bumping into your thermostat or accidentally pressing the wrong button can result in it becoming locked, but unlocking it is a quick process.
To do this, you can go to your settings on your thermostat, and you'll see a menu for the home and away setting. There, you can set the temperatures, times, and days you want the program to run. When you're done choosing the details of the program you want to set, press “set schedule,” and it will automatically set it.
Set cannot be changed until the setting of the temperature is turned up or down. Hold is when's temperature is set until the next segment is arrived at. Example: my thermostat is set to go on at 6:am to 70 degrees. If I were to wake up at 4am and feel cold I can set the temperature to 75 degrees.
Troubleshooting a Programmable Honeywell Thermostat
Put in new batteries; Check the circuit breaker; Check the indoor unit to make sure all the panel doors are closed; Make sure the power is connected to the furnace or air conditioning unit by checking the switch near the indoor unit is up.
A Hold message on a Honeywell Thermostat tells the thermostat to maintain the HVAC system for the building at a set temperature. The temperature will be maintained until the Hold expires or the temperature is manually changed. A Hold can be temporary or permanent depending on its setting.
This is a short cycle protection. Something has happened, usually a power outage and this is a protection for your unit to not turn on and short cycle before all the pressures have been equalized. Wait 3-5 minutes for your air conditioner to be ready to turn on again.
To permanently ignore the schedule, press up or down until the desired temperature is displayed. Then, press the Hold button to maintain the new temperature indefinitely. The word Hold will appear on the screen. Press the Run button if you wish to cancel either override and resume the schedule.
Turn your thermostat to the 'off' position... Then venture off to your home's breaker box. Find the breaker to your HVAC system, flipping it 'off'. Make sure the breaker is flipped all the way 'off,' then wait for 30-seconds. Turn the breaker back 'on.
Locate the sensor, which is a small, round component usually positioned near the bottom of the thermostat. It may be labeled as “sensor” or “thermistor.” Using a soft brush or a can of compressed air, carefully clean the sensor to remove any dust or debris that may have accumulated on its surface.
Most modern thermostats will have a clearly marked reset button inside the panel. It's usually small and recessed, so you might need a pointed object like a paperclip to press it. For those wondering specifically how to reset air conditioner thermostat models, the process is generally the same.
Remove the temporary hold: Once you have found the current temperature setting, you should see an indicator that shows a temporary hold or override. This indicator may be a flame symbol or a clock symbol with a plus or minus sign. Press the appropriate button or use the arrows to remove the temporary hold.
Typically, the 'Permanent Hold' reading means that the thermostat is set to hold a specific temperature indefinitely.
Pressing hold means it won't revert back to schedule automatically and will stay where it's set until you tell it to go back to the schedule. It means if your program normally is set to 65 degrees but you want it warmer, you can manually set it to 70 and press hold, and it won't return to 65 until you release the hold.
To remove scheduling. Go to settings, Select preferences then advanced settings. Then you will be able to select non-programable.