To thoroughly clean each pad, use a light brush to gently brush both sides of the pads, then pour a solution of water and vinegar on both sides. Leave the pads in this position for about 10 minutes before rinsing them with regular water to wash away any accumulated dust.
Honeycomb Pads
The most thorough and safe way to clean the cooling pads is by combining water and vinegar in a 50-50 ratio solution. You can rinse or soak the pads in the solution, which will disinfect the pads and keep odor away.
If you find that the cooling pads are still in usable condition, you can clean them by making a solution of water + lemon or vinegar and submerging the pads in them for about 60 seconds. Next, reinstall the pads and turn on the evaporative cooler to experience fresh, cool air that smells great.
Clean the Interior: Wipe down the interior of the cooler with a damp cloth to remove dust and dirt buildup. Pay attention to areas around the fan and pump. Clean the exterior: Use a damp cloth to clean the exterior of the cooler. Avoid using harsh chemicals or abrasive cleaners that can damage the surface.
I recommended making a baking soda paste (baking soda & water) and spreading it all over the inside of the lid and cooler, leave it closed overnight and rinse out the next day. Then fill the cooler with warm water and pour in three boxes of baking soda and leave soaking for three days.
To clean cool cell pads, start by turning off and unplugging the cooler. Remove the pads and rinse them thoroughly with water to remove loose debris. For a deeper clean, soak the pads in a mixture of water and a mild detergent or vinegar solution for about 30 minutes.
The cooling pads can be soaked in a 50/50 solution of vinegar and water and then left to dry while the filter pad compartment is cleaned with soap and water. Allow your cooling pads time to dry weekly or monthly to avoid mould growth. Regular sun exposure is a great way to kill off any bacteria.
It is recommended to clean your air cooler at least once every two weeks during the summer season to maintain its efficiency.
You can also wash the tank with mild, soapy water and then flush it out with clean water. Once the tank has been cleaned, the next step is to clean the pipes to ensure that they are free of mold. This can be successfully achieved by using the same 50-50 water and vinegar mix that was used to clean the cooling pads.
Mix a solution of one-part white vinegar to two parts water in the cooler. Use a rag to scrub the stained area. Empty the cooler and rinse inside and out.
Evaporative coolers can have musty smells. It is a good idea to add essential oils to help make the portable cooler smell better. Mix 15 drops of a scented essential oils with vinegar and place it in a spray bottle. Spray the essential oil mixture into the air cooler after you have cleaned it.
When it is time to clean the cooling pad, wash it with soap and water. The cooling pad can also be dipped in water, vinegar, and baking soda solution. Allow it to soak for a bit before removing it. Let it dry under the sun, and make sure that it is fully dried off before replacing it.
Add essential oils
Add a few drops of your favourite essential oil to the water tank. The cool air passing through the air cooler will diffuse the fragrance and fill your room with a wonderful aroma.
Cleaning the Water Tank
Use white vinegar to scrub away any hard water deposits and mildew. This solution helps break down mineral buildup and is safe for your cooler. After scrubbing, rinse the tank thoroughly. Check for any signs of corrosion as well.
The cooling pad is wetted by the water from the pump, and the hot air from the fan or blower passes through it. The water in the cooling pad evaporates and the air becomes cool and moist. The process of evaporation lowers the temperature of the air, while increasing its humidity.
Mix a bucket of warm water with a few drops of eco-friendly liquid dish soap. Add 1 cup of baking soda to the mix if there are any noticeable smells wafting out of the cooler. Using a microfiber cloth, wipe down the inside and outside of your cooler, scrubbing a little harder where there are any stains.
How to clean air cooler honeycomb pads? First, remove the honeycomb pads from the unit and wash the honeycomb pads thoroughly with a soft brush or sponge. Once you've cleaned the pads, you can sterilise them by soaking them in a solution of 1 part white vinegar and 4 parts water for 10-15 minutes.
Baking soda. Baking soda is a versatile product. In addition to treating the fungal infection, it can also help with neutralizing foot odor.
Evaporative coolers are an efficient way to beat the heat while being gentle on your wallet. You can typically expect an evaporative cooler to last between 10 to 20 years, depending on usage, maintenance, and the model you choose.
Another effective way of increasing the cooling efficiency is by adding ice to the water in the tank. Many people have already tried it with their coolers. In fact, some coolers also come with dedicated ice compartments. Adding ice to the water makes the pads cooler, resulting in cool air passing through them.
To keep your air cooler in optimal condition, it is important to clean it regularly and check it for any problems. It is also important to perform regular maintenance, such as changing air filters, inspecting the evaporative cooler pads and refilling the water tank, to ensure that the air cooler is working efficiently.
Reusability: Unlike disposable alternatives, these gel pads can be reused multiple times, making them a cost-effective option. Safe Materials: Made from high-quality, non-toxic gel that is safe for both adults and children.
Incorporate Natural Deodorisers: Introduce natural deodorising agents like white vinegar or lemon juice into the water reservoir to neutralise odours and inhibit bacterial growth. Add a small quantity of vinegar or a squeeze of lemon juice to the water before each use.
The wood slivers are packaged into pads ranging in thickness between 3-5 cm and fitted to the evaporative cooler on the inside of the louver. Woodwool evaporative cooler pads are commonly used in older model air conditioners. Woodwool filter pads normally last 1-2 years depending on water quality.