Regular dish soap dissolved in water is often enough to clean away everyday dirt and grime. Dissolve the soap in the same ratio as you would when washing dishes and then pour it along those outside pavers. Let it sit for several minutes and then scrub with your brush, and then rinse clean.
Mild detergent and water. If your pavers aren't too dirty, this can be a quick and easy way to clean them without any fancy equipment. Mix some mild dish soap with water in a bucket to create suds, then use a brush or a sponge to scrub the surface of the pavers.
Dish Soap: A great way to clean patio pavers without removing any sand or decorative texture is by simply cleaning with a gentle soap or degreaser like Dawn. Add the dish soap to a container of water, then start lightly scrubbing the dirty spots with a rag, sponge or a stiff-bristled brush.
Usually, hosing them down once a month is sufficient. Use soap and water, if the pavers are still dirty after sweeping and water hosing, make a solution of soap and water. You can use dish soap, laundry detergent, or any type of general-purpose cleaner. Never use bleach on your pavers, as it can damage the surface.
Water and mild dish soap is a popular cleaning solution because it's easy to find at home and it won't damage brick, but it will tackle stains. The BIA recommends using hot water for surface cleaning with a detergent. White vinegar and water, another common household cleaner, can also be used on mildew.
The acetic acid in vinegar is a little stronger than acid rain, so exposing your pavers to this substance can lead to bleaching, corrosion and the loss of protective sealant.
Use a specialist cleaner
Try a specialist cleaner like Wet & Forget, at Walmart, which you spray onto the surface of the paving and leave. It can also be used on steps, fountains, patio umbrellas and other smaller outdoor areas. It's bleach-free and non-acidic but will remove mold, moss and grime without any scrubbing.
Baking soda is an amazing household cleaner, and it can work really well on your pavers too.
Yes, using vinegar is a good choice for cleaning pavers and very effective as well. Once vinegar is a non-toxic and biodegradable solution, it is a great way to clean your pavers without resorting to chemicals, which is safer, since you don't harm your plants, pets, or the soil.
Cleaning pavers with bicarbonate soda and vinegar
Fill the bucket with lukewarm water and then add the bicarbonate soda, making sure it dissolves properly. Then add a little bit of white vinegar. Pour the solution onto the stained areas on your paver surface and use the scrubbing brush to apply it thoroughly.
Scrubbing Brush and Bucket
Ahhhh the good old-fashioned scrubbing brush. It's been around for such a long time as it genuinely works. When those bristles are passed over the target surface vigorously enough, it'll remove most dirt and stains.
Wash patio slabs with white vinegar
This eco-friendly solution is made up of equal parts vinegar and water, which is then left to soak into the patio to correct any discolouration and also remove tough marks. You should first move all plants and furniture out of the way, then sweep the area to remove any moss.
USE WHITE VINEGAR
Cleaning pavers with vinegar is one of the simplest ways to eliminate stubborn oil stains, or moss, and algae on pavers, particularly brick ones. Vinegar is 5% acetic acid, making it a fairly powerful cleaning agent for breaking down oil, dirt, bacteria, and other kinds of stains.
Scrub off the stains and the vinegar with some good old soap and water. Simple Green is one of the best cleaning products for dirty pavers. It doesn't have any harmful chemicals that could possibly warp your precious driveway.
Whether your patio is sealed concrete or cement, or even sealed concrete pavers, a bleach and water solution makes it easy to clean away built up soil, stains from leaves and pollen, mold, mildew and algae.
Similar to cleaning pavers with muriatic acid, avoid an intense concentration of bleach, as it can damage the pavers.
If vinegar does not do the trick, you can also try mixing about a cup of bleach for each gallon of water and using this as your mold-killing spray solution.
OxiClean is a powerful concrete cleaner that works well on various materials, including pavement and grout. This concentrated solution provides excellent cleaning without leaving residue.
Although bleach is great at the whitening effect, you can use peroxide to achieve this. Hydrogen peroxide is an oxygenated bleach. It is safe for plants, so when you rinse this solution, it won't harm anything. It works together with the dish soap and baking soda to remove dirt and whiten dirty concrete.
Try Concrete Stain
The simplest path to reviving tired pavers is to apply an acrylic-based semitransparent concrete stain, such as Behr Premium Semi-transparent Concrete Stain ($27/gal.; Home Depot) or Valspar Semi-transparent Concrete Stain ($28/gal.; Lowe's).
Will Vinegar Damage Pavers? Yes, vinegar is NEVER safe to use on pavers. It can cause a lot of damage, and you may have to replace a lot of the pavers if you try this. I know that vinegar is often used for household cleaning projects, but when it comes to your patio, it's a big no!
Then, move to a household cleaner. A dish soap, like Dawn, is a safe place to start. The surfactants in dish soaps are designed to remove oil and grease, they're gentle enough to be used without issue on your pavers. In a bowl or bucket, mix the soap with water and pour it onto the stain and agitate.