Mix Solution of dish soap and water, and use a brush to scrub the pavers clean. Make sure to rinse the pavers thoroughly afterward. This process may need to be repeated for tough stains. A recommendation is to do this every few months.
Dish soaps are ideal for this job. While they feature surfactants that are able to remove tough grime like oil and grease, they are also safe enough to use on paving stones without compromising their integrity or appearance.
Mild detergent and water.
Mix some mild dish soap with water in a bucket to create suds, then use a brush or a sponge to scrub the surface of the pavers. If your pavers are textured or have intricate designs, this cleaning method can be gentler than a power washer.
There are useful tools for cleaning paving stones, such as joint scrapers, sweepers, and pressure washers. In addition, pavers can be cleaned with a small pickaxe, broom, and garden hose.
White vinegar is good for cleaning pavers, though it's also acidic enough to erode the stones' surface. Diluted vinegar can be used safely to clean paving stones, though it should be used sparingly and infrequently to protect your paving from damage.
Baking soda is an amazing household cleaner, and it can work really well on your pavers too.
Use a specialist cleaner
Try a specialist cleaner like Wet & Forget, at Walmart, which you spray onto the surface of the paving and leave. It can also be used on steps, fountains, patio umbrellas and other smaller outdoor areas. It's bleach-free and non-acidic but will remove mold, moss and grime without any scrubbing.
Then, move to a household cleaner. A dish soap, like Dawn, is a safe place to start. The surfactants in dish soaps are designed to remove oil and grease, they're gentle enough to be used without issue on your pavers. In a bowl or bucket, mix the soap with water and pour it onto the stain and agitate.
Wet The Patio With Water
After it's wet, then add some dish soap or a degreaser to a bucket of water. Using a brush that's stiff, pour some water and soap on the pavers and give it all a scrub. Keep it gentle, and don't go overboard on the scrubbing, so you don't damage any of the surfaces.
Try Concrete Stain
The simplest path to reviving tired pavers is to apply an acrylic-based semitransparent concrete stain, such as Behr Premium Semi-transparent Concrete Stain ($27/gal.; Home Depot) or Valspar Semi-transparent Concrete Stain ($28/gal.; Lowe's).
If vinegar does not do the trick, you can also try mixing about a cup of bleach for each gallon of water and using this as your mold-killing spray solution.
Use a mild grease-cutting detergent such as Dawn or Ajax dishwashing liquid mixed with water and a natural or synthetic bristle scrub brush to help brighten the patio surface. NOTE: Never use a wire brush as it can leave rust stains and scratch the concrete surface.
Formulated to cut grease, dish soap is another effective solution for treating oil stains on a driveway. Squirt some dish soap on the oil stain. Scrub the stain with a heavy-duty brush. Then rinse away the soap with water.
The old cleaning solutions are still the best ones, even with pavers. Use your everyday hand soap or dishwashing soap and add in some water to maintain and clean your paver surfaces. Get a bowl or tub of water, put in the appropriate amount of soap, then lightly scrub your paver driveway or walkway using a clean brush.
Apply the Simple Green solution. Allow the product to soak for a minute or so on heavy soils and greasy spills. Scrub, if necessary. Scrubbing with a soft bristle brush or non-abrasive scrubbing pad provides agitation that will help to loosen soils and will ensure a thoroughly clean, residue free surface.
Can you power wash pavers? Power washing (also known as pressure washing) is also a very effective method by which you can remove dust deposits and various stains from your pavers. Just make sure that the water jet is not directed directly at the joints between the paving stones.
Scrubbing Brush and Bucket
Ahhhh the good old-fashioned scrubbing brush. It's been around for such a long time as it genuinely works. When those bristles are passed over the target surface vigorously enough, it'll remove most dirt and stains.
OxiClean is a powerful concrete cleaner that works well on various materials, including pavement and grout. This concentrated solution provides excellent cleaning without leaving residue.
Although bleach is great at the whitening effect, you can use peroxide to achieve this. Hydrogen peroxide is an oxygenated bleach. It is safe for plants, so when you rinse this solution, it won't harm anything. It works together with the dish soap and baking soda to remove dirt and whiten dirty concrete.
Cleaning your pavers with bleach is a safe and effective way to keep them looking clean and new. If you have any hesitation about the process, Aviara Pavers can guide you through every step to ensure your pavers are clean and well-maintained.