Vinegar can be applied directly or in a 1:1 ratio with water. In the case of bicarbonate soda, dissolve 1 to 5 tablespoons in 10 litres of water, depending on the degree of soiling. The mixture must now soak in for 15 to 20 minutes. The patio is then cleaned with a scrubber and finally rinsed with clean water.
Use a mild grease-cutting detergent such as Dawn or Ajax dishwashing liquid mixed with water and a natural or synthetic bristle scrub brush to help brighten the patio surface. NOTE: Never use a wire brush as it can leave rust stains and scratch the concrete surface.
Mix equal parts vinegar and water, scrub the patio with the mixture, then give it a good rinse. If stains don't dissolve, try undiluted vinegar. Do not use vinegar and baking soda mixture in a power washer. And be sure to protect your hands, eyes, and nose to minimize any irritation.
In fact, vinegar removes mold from concrete better than bleach. Bleach will only remove the top layer of mold, causing the mold to return.
Use bleach for heavy-stained slabs
Dilute half a bucket of bleach with equal parts water, applying evenly to your green-tinged patio. You should leave the solution to work for ten minutes before rinsing thoroughly with clean water, repeating the method for stubborn algae.
Soapy water method. Contrary to popular belief, you don't need any fancy products to clean a patio without a pressure washer. In fact, one of the most effective patio cleaning products is good old-fashioned washing-up liquid mixed with warm tap water.
'A homemade cleaning solution for your patio can be made by mixing equal parts water and white vinegar,' says Zak. 'This natural cleaner is effective in removing dirt, mildew, and algae. For stubborn stains, you can add a few drops of liquid dish soap to the mixture. '
As a gentler cleaner, bleach can't harm concrete's durable material. Aside from being an effective cleaner and stain remover, it also acts as a disinfectant to the concrete surface.
Wash patio slabs with white vinegar
White vinegar is great at lifting stubborn dirt and household stains, and it can even be repurposed in your garden too. This eco-friendly solution should be made with equal parts white vinegar and water and left to soak into the patio to correct discolouration and remove tough marks.
On the other hand, baking soda is useful because it is slightly abrasive, which is excellent for the rough surfaces of paving slabs. When it is mixed with water, it can dissolve dirt and grease, and like vinegar, you'll only need a brush or broom when cleaning.
A quick answer is yes! White vinegar can clean concrete and remove stains. It may not be as powerful as concrete cleaners, but it can clean up concrete stains on a budget. Not to mention that vinegar can also remove germs and bacteria from concrete.
But that's not all; chlorine bleach can also be used for cleaning the concrete driveway. Of course, you should dilute it with equal parts of water or a 1:1 ratio. With the mixture ready, spray it on the driveway, allowing it to sit for 10 minutes. Then, use a stiff brush before rinsing with clean water.
Grab Hydrogen Peroxide
For a natural, stronger solution to tackle stubborn stains on concrete surfaces, mix flour and hydrogen peroxide into a paste the consistency of peanut butter. Spread it over the stained area, and then scrub it with a nonmetallic brush. After giving it a good scrub, let sit overnight.
Liquid peroxide formulas clean and brighten grout lines without harsh acids and chlorine bleaches that can damage the grout and surrounding flooring materials. The Liquid peroxide cleans, refreshes, and brightens concrete, tile, and grout without leaving watermarks or residue in contrast to other cleaning chemicals.
There are several good reasons to pressure wash your concrete on a regular basis: Reduce or eliminate dirt, sand, salt, or corrosive chemicals to extend the life of your concrete. Improve your home or business' curb appeal. Reduce or remove pollens collecting near and around your home.
Make up a 50:50 vinegar and water solution, and apply to the paving – using a watering can will help you get even coverage. Leave the solution to soak for around 20 minutes, then use a stiff brush to remove stains. Once you're done, mop with clean water. Leave to dry before you put anything back on to the patio.
Wash with soapy water
The classic and easiest method is to wash your paving slabs with warm water mixed with dish soap, rubbing it in with a brush before rinsing it with water and allowing it to dry fully.
Apply the bleach and water to the wet paving slabs
Brush the solution to make sure you get an equal coverage of the cleaner. Make sure you brush the cleaner into all corners of the paving slabs. Once applied leave the cleaner on the surface for 10 -15 minutes.