One of the easiest ways to break a padlock is with a hammer. Start by inserting 2 fingers into the padlock's shackle loop and pull up on the shackle to create tension. Then, tap the side of the lock that contains the fixed end of the shackle with a hammer using quick, short strikes.
First, you need to put your two fingers between the shackles. Second, you need to hold the shackle by pulling it away from the body. Third, you need to hit the fixed end where the shackle and its body meets. Fourth, with medium force, hit it with the hammer repeatedly until the body releases the shackle.
Turns out, any Master Lock can easily be broken into with just a small hammer. As this video illustrates, all you need to do is tap the side of a Master Lock with a hammer to get it to open, no key, no combination required.
One of the easiest ways to break a padlock is with a hammer. Start by inserting 2 fingers into the padlock's shackle loop and pull up on the shackle to create tension. Then, tap the side of the lock that contains the fixed end of the shackle with a hammer using quick, short strikes.
Bolt cutters are the common tool of choice for to cut padlocks during forcible-entry. Unfortunately, most padlocks are made of case-hardened steel, which is very strong in comparison to the materials that bolt cutters were intended to cut.
Fashion a lock-pick using household items.
Bobby pins or hair pins work best, but you can also use heavy-duty paperclips, or other stiff bits of wire. First create your pick by opening out one of the bobby pins or paperclips until it is straight. Then bend the last 1/8" of the pick up at a 20 degree angle.
To do this, unfold the large edge of your paperclip twice until a straight portion juts out. You will be inserting the straight part into the lock to use as a pick. Some locksmiths also put a tiny upward bend into the tip of the pick. This is to depress the pins inside the lock but is not strictly necessary.
To open combination locks without a code, start by pulling up on the dial and turning it clockwise until you hear the lock click. Then, check what number you're at, add 5 to that number, and write it down. Next, set the dial to that number and turn it counterclockwise until you hear it click again.
To unlock a privacy lock you'll need a flathead screwdriver that is small enough to fit into the hole on the doorknob. Insert your screwdriver into the hole and push forward. If your doorknob is using a push-button type privacy lock, then you should hear a loud click and the door will open.
There are many ways in which lock picking can permanently damage a lock. Several common ways include breaking the springs, eroding internal components, or even breaking your pick in the keyway. For these reasons and more, you should never pick a lock that is currently in use.
Insert a pair of scissors into the hole of the lock as deeply as you can. The blades should be thin enough to fit into the whole of the lock. ... Turn the scissors counter clock wise, from left to right, once the scissors are deeply inserted into the lock. Shift and move the scissors around until the lock is opened.
If you misplace your key or forget the combination to a lock, you may need to cut through the lock to get it back. Most steel locks can be opened by either using bolt cutters, an angle grinder, or a hacksaw.
If a clean cut is desired when cutting through hardened steel, or if the steel's hardness must be retained, a fine toothed hacksaw will work wonderfully, though the process is long and will require a great deal of intense effort.
Myth 2 | Lock picking is instantaneous
Even on very low-security locks, it could take 10 to 15 seconds to open the lock. For more complicated locks, it is more likely to take minutes. But all of this takes skill and success is not a given simply by virtue of using lock picks.
According to HomeGuide, the average price to hire a locksmith is between $85 and $175, regardless of the job. Locksmith rates start at $65 to $185 to unlock a house and go up to $75 to $220 for bigger jobs such as changing the locks on a car.
Time is money, so the only picking that is done is that which is profitable and worth it. Not all locksmiths do lockouts either, and some locksmiths would never get the opportunity to pick locks, so the only way they would get to do it is if they did it on their own for practice or fun.
Picking a lock with paper clips works pretty much the same way as picking a lock with a traditional tension wrench and rake. You just need to turn two paper clips into those two very same tools, and then pick the lock with them like you'd normally do.
Step 1: How a Tubular Lock Works
The shape of the key is circular, open in the center, and has grooves that are cut into the outsides of the circular shape. Once the key has been fitted correctly in the keyhole, it will depress the key pins to the correct depth and the key can be turned opening the lock.