Battery Backup: Many alarm systems have a backup battery. Look for the backup power source within the control panel or nearby. Disconnecting or removing the backup battery might silence the alarm.
The alarm in your home security system is designed to be a deterrent to intruders, as well as alert occupants and draw attention to your home, whether that be from neighbours, passers-by or authorities. Systems will sound for about 5 to 10 minutes, depending on the system, before stopping and automatically re-arming.
For this reason, all modern alarm systems have a battery backup designed to power the system for 10-24 hours, depending on the complexity of the system and the condition of the battery.
You will need to turn the mains of to the control panel, whether at a spur or remove the fuse inside the panel, unplug the leads from the battery inside the panel and also the battery inside the external sounder. This will shut the system down.
Hardwired Smoke Alarms
Locate the main breaker panel for your home. Identify which circuit breaker powers your smoke alarms. Each breaker should be labeled, so look for something that says “smoke alarm” or something similar. Turn off the circuit breaker for your smoke alarms.
Remove the AC power to the home alarm console from the wall directly. Use your console's access key (or another item such as a small screw) to unlock and open the system's backing. Lastly, disconnect at least one of the wires that are attached to the system's main battery, which is blocky and noticeable in most units.
Every alarm system has a backup battery located in the control panel. Ensuring this battery is well-charged is important, as it's designed to keep your security system running during a power outage. The normal life of an alarm system battery spans two to five years, and you'll be alerted when it needs replacing.
If you have a wireless burglar alarm, it shouldn't cost you anything to remove. That's because you can just unscrew it from the wall yourself. On the other hand, if your burglar alarm is wired in, you'll want a professional to safely disconnect it for you.
Reset the home security system
Even though you can turn the alarm off on your home security system without assistance, you cannot reset it on your own. Contacting the security company will allow you to have the system reset, although this may mean creating a new security code or pin number.
Most home monitoring services will automatically dispatch local police if your system loses power. Disconnecting wiring or causing the old system to lose power may set off a false alarm, resulting in an unnecessary emergency response that could land you with a fine.
If that power suddenly becomes unavailable, many systems provide backup batteries to keep the keypad and alarm operational. In many cases, this sounds like great news for homeowners. However, it's important to note that many backup batteries only last four to six hours before they need recharging.
Alarm systems should have an automatic cut-off device fitted to stop the alarm sounding after 20 minutes. Most modern alarms have such a device already fitted, but cut-out devices can be fitted to older, existing systems.
Power Outages or Fluctuations: After a power outage, your security system might beep to indicate a reset. Solution: Check the system's battery backup or consult the user manual for reset instructions. Low Battery Warning: Most security systems have a battery backup.
In the event of a power outage, perhaps because of adverse weather or a problem at the power station, the reserve battery is there to keep the system fully operational whilst the mains power is off. It is almost always the case that if the alarm goes off when not required, it is due to a failing internal battery.
Power Outage Issues
Simply enter your keypad code and hit Disarm to clear the alert. After power is restored, if beeping still occurs after 24 hours, please use the Live Chat button in the bottom right corner of this page to talk to an agent.
Whenever a security alarm system is installed, it is set to a default code. The default codes are easy like 0000 or 1234 and many people forget to change it. Changing default codes is very important since many thieves are well aware of the common default codes. The default codes may leave you at high risk.