Remove the temporary hold: Once you have found the current temperature setting, you should see an indicator that shows a temporary hold or override. This indicator may be a flame symbol or a clock symbol with a plus or minus sign. Press the appropriate button or use the arrows to remove the temporary hold.
You can take your Honeywell T6 Z-Wave Thermostat off hold by pressing the current hold setting and then pressing Run Schedule. This will cancel the current temperature hold for the thermostat and return the T6 to its normally set schedule. Both permanent and temporary holds can be exited.
If your thermostat is on a hold setting and you wish to remove the hold, simply check for “Cancel,” “Run,” or “Run Schedule.” Depending on your thermostat model, the specific run button you need will be labeled differently.
Temporary Hold – Adjust the temperature setting on your thermostat display. A “HOLD UNTIL” message will appear, followed by the time of the next schedule change. Touch the time again and use the +/- icons to adjust the time the hold will end.
By pressing “Hold”, your thermostat will lock in the temperature it's currently at until you change it again. When you are ready for your normal schedule to resume, simply press the “Run” button and return to your typical programming.
For the Honeywell Home app: Select the thermostat, press the Schedule icon, choose Options, then Turn Schedule Off. For the 8000 series thermostat: Press the "Sched" button, select "Edit," choose the days and period to clear, then select Cancel Period to clear the schedule.
Although there might be slight differences depending on the manufacturer, in general the “hold” button is used to lock in a specific temperature, regardless of whatever program you might have set for your system. For instance, you might have your furnace set to keep your house at 68 degrees during the winter.
Under your thermostat, you will find a flat tab indicating the GFCI status of your thermostat. Next to that tab, there is a small button. Hold it for 5-6 seconds to turn it on or off.
If your thermostat is stuck, the first thing you should do is make sure your system isn't locked. Bumping into your thermostat or accidentally pressing the wrong button can result in it becoming locked, but unlocking it is a quick process.
Remove the temporary hold: Once you have found the current temperature setting, you should see an indicator that shows a temporary hold or override. This indicator may be a flame symbol or a clock symbol with a plus or minus sign. Press the appropriate button or use the arrows to remove the temporary hold.
1 Press or to adjust the temperature. 2 TEMPORARY HOLD is displayed and the setpoint temperature flashes. While it's flashing, press Hold (Mode) button to change to Permanent Hold.
Troubleshooting a Programmable Honeywell Thermostat
Put in new batteries; Check the circuit breaker; Check the indoor unit to make sure all the panel doors are closed; Make sure the power is connected to the furnace or air conditioning unit by checking the switch near the indoor unit is up.
What is temporary hold? The temporary hold setting is when you change the temperature setting to a different temperature and it stays at that setting until the next schedule change. The permanent hold setting holds the temperature setting you have chosen for an indefinite time. This overrides your scheduled settings.
Locate the system Slider Switch labeled Heat Off Cool. Slide the switch to the desired setting and either manually adjust the arrows to the desired set point and press hold or establish a schedule for heating and cooling.
To remove scheduling. Go to settings, Select preferences then advanced settings. Then you will be able to select non-programable.
Once you have located the reset button, the process to reset thermostat settings is straightforward: Press and Hold: Using a small object, press and hold the reset button. The time you need to hold it can vary, but generally, 5-10 seconds should suffice.
A Hold message on a Honeywell Thermostat tells the thermostat to maintain the HVAC system for the building at a set temperature. The temperature will be maintained until the Hold expires or the temperature is manually changed. A Hold can be temporary or permanent depending on its setting.
Permanent hold means that we are bypassing all the schedules permanently. So you are always in control. If you do not want schedules nor programs, and want to be in control of the set temperature at all times, you will leave it on permanent hold forever.