It is fairly easy to tell if you have a properly sealed wax ring; your toilet will not wobble, will be stable, and will have no water leaks. A few specific things to check include the height of your toilet flange, the stability of the toilet, and whether the floor around the base of the toilet remains dry.
The only-when-flushed toilet leak could be caused by loose mounting bolts or a worn-out wax gasket while the all-the-time leak could be caused by a loose water supply line connection, a problematic water shutoff valve, or a faulty seal between the toilet tank and its base.
In theory, the wax ring “should” last the lifetime of the toilet, or certainly 20 to 30 years. We come across situations all the time, however, where wax rings are in need of replacing well short of this scenario.
In conclusion, the wax ring on your toilet will most likely never need to be replaced for the lifetime of the toilet. But, it will if you find that the base of your toilet is leaking. Sometimes, leaks at the base can be caused by the bolts being too loose. On the other hand, it could be because of a faulty wax ring.
Again, leaky water is a telltale and common sign of a bad wax ring. If you do not regularly see moisture or puddling water under your toilet, you may be fine. Leaks can, however, happen where you do not see them, under the finished floor and into the subfloor.
If the wax ring isn't sealed correctly, it can cause wastewater to leak from the bottom. Leaking water can lead to mold around the floor. A poorly sealed wax ring can also cause foul odors to stink up your bathroom. If you smell sewage or see water leaking, then you may need a new wax ring.
🚽 Caulking Prevents Water Contamination
It could be water splashing out of a bathtub, mop water, water from a shower and even misguided potty training from your young boys who seem to miss the toilet bowl every single time! Without caulk around the toilet base, water can get under there and sit for a long time.
Place the Wax Ring and Toilet
Do not be tempted to stack up two wax rings because this setup tends to leak. Installing a flange extender or using an extra-thick wax ring will work much better in the long run.
Wax-free toilet seals are made out of a heavy duty rubber, so they're flexible enough to shimmy into the flange without smearing a wax ring. Wax-free seals can also be reused. As long as they're still attached to the bowl in good condition, you can reinstall the toilet without replacing the seal.
$90-$120 is a good ballpark.
If you are having other plumbing work done, they might do it cheaper, and if they have a large travel fee, you may pay closer to $150. Unless there is a problem, it should take them under a half hour, whereas, it might take a novice 1.5-2 hours.
When it works properly, the wax ring creates a watertight seal between the toilet base and the drain pipe. Unfortunately, wax can fail over time, leading to water leaking onto the floor. The good news is that popping on a replacement wax ring will fix the problem.
So, what's the cause? Leaky loos are usually caused by a faulty flush-valve or fill-valve inside your tank – predominantly on dual-flush WCs. It can happen with any WC brand and type, but most leaky loos are the result of a failure in valve seals. These failures can happen on old and new WCs.
A regular wax ring is all you need if the flange is set on top of the finished floor. Oatey® Heavy Duty Wax Bowl Ring can be used to set any floor type closet bowl. A thicker wax ring is used when the flange has already been set on the subfloor and is flush with the tile instead of sitting on top of it.
However, consulting my copy of Creative Homeowner Plumbing book I see they recommend "Install the new wax gasket on the toilet flange. Press the bolts into the wax to hold them upright." Next step, "using the closet bolts as guide, set the bowl onto the flange gasket..."
The main signs of a leaking toilet may include a damp area on the floor around the bottom of the toilet, a spongy feeling in the floor at the bottom of the toilet seat, signs of dampness on the ceiling in the room underneath your toilet, or the occasional smell of sewer gas and the flooring coming up in the area around ...
If you notice the caulk around the base of your toilet start to turn brown, it means your toilet has a wax ring which is leaking. As a result, human waste especially urine is decolorizing the normally white caulk. The solution to this is to remove the toilet and put a new wax ring.
A toilet that is not level or centered could continue to leak water. Tighten the bolts with a wrench and replace plastic caps. If the bolts continue to spin or appear broken, head to the hardware store for replacement bolts.
In an effort to dislodge whatever is clogging the toilet, many homeowners get overzealous and thrust too hard downward into the toilet with their plunger. A hard thrust downward can break the wax seal between the toilet and the floor, causing a leak. And a really hard thrust could even crack the bowl.
First and foremost, a loose toilet will often cause a wax ring to lose its seal and leak. Next, in the event that you have to replace your toilet, your wax ring will lose its seal, so you'll need to install a new one along with your new toilet.
In most parts of the United States, it is a requirement of building code to caulk around toilet bases. This could apply to both new builds and remodeling, though as regulations vary from one state to another it's a good idea to check local statutes.
An argument that one could make for wax-free seals is that they're reusable. If you need to remove the toilet base with a wax ring, you'll need to purchase another ring to reinstall the toilet. When you use a wax-free seal, it's reusable as long as it's in good condition.