There is usually a small reset button somewhere on the thermostat. Finding this button may require that the thermostat panel be removed and pressing this button may require something like a paperclip to push. Hold the reset button down for 5 seconds and the thermostat should reset.
Locating the Reset Button
Remove the thermostat cover by either snapping it off or unscrewing it, depending on the model. Most modern thermostats will have a clearly marked reset button inside the panel. It's usually small and recessed, so you might need a pointed object like a paperclip to press it.
If your thermostat is not reading correctly, it might be due to a dirty or faulty sensor. A quick fix could be to gently clean the sensor with canned air to remove any dust buildup. However, if problems persist, replacing the thermostat could be the next step.
Switch the thermostat to the off position. Locate the breaker that powers your HVAC system and turn it off. Wait 30 seconds and turn the breaker back on. Turn your thermostat back on and confirm it has reset properly.
On average, a thermostat takes around 5 to 10 minutes to reset. However, the exact time may vary depending on the specific model and brand of the thermostat. During the reset process, the thermostat goes through a rebooting sequence, which includes shutting down and restarting.
If your thermostat is set to a temperature regulation mode or has an energy-saving program enabled, it might reset to conserve energy.
The calibration screw is typically located in a curved piece of metal. First, remove the control unit from the wall mounting and then locate the screw in the back. Turning it back and forth opens the contacts. Once you feel the setting is correct, turn the calibration screw again to close the contacts.
Factory reset removes all your personal settings and restores the thermostat to factory default settings. After you reset your thermostat, you'll need to set it up and add it to your home in the app again, just like you did when you first installed it.
This could be due to electrical problems, a software glitch, or physical damage. Some thermostats have a lock feature to prevent unauthorized changes. If this feature is enabled, you'll need to unlock the controls before you can adjust the temperature settings.
If the temperature is set to 74°F but the thermometer shows 78°F, you will have to recalibrate the thermostat to account for this 4-degree deviation. Even with older AC units or furnaces, you might have to recalibrate your thermostat from time to time.
Dirty or worn flame sensors, blower motor problems, clogs in the condensate lines, and electrical issues are some of the many problems that can leave your HVAC system failing to deliver the temperatures you've programmed in your thermostat.
First, replace the batteries in your thermostat as this is the easiest fix. Then, you should check that your thermostat is level and that all parts of your HVAC system are clean. In particular, look out for dirty air filters, which can be the cause of your thermostat reading the wrong temperature.
In AC systems, the air conditioner reset button is on the outside unit's lower edge, typically close to the ground. Some models have the reset button located behind the service panel, which may require tools to remove. Reset buttons are usually red or yellow with a clear “reset” label.
Leave both units in place for another 20 minutes, and check the readings again to see if the readings are the same. If the readings between your thermostat and thermometer are still different, you likely have a malfunctioning thermostat and there may be an issue impacting thermostat accuracy and efficiency.
There is usually a small reset button somewhere on the thermostat. Finding this button may require that the thermostat panel be removed and pressing this button may require something like a paperclip to push. Hold the reset button down for 5 seconds and the thermostat should reset.
Use the up and down arrows on your thermostat to set the temperature you want your home to reach. You should see a different display number related to the selected temperature. Top Tips: You may hear the system click as it engages and turns on the air conditioning to lower the temperature in your home.
In most cases, installing a new thermostat is a relatively simple do-it-yourself project that can result in improved comfort and convenience and one that can help you save energy.
Signs of a Bad Thermostat
If there's no change in your home's temperature when you adjust the temperature, or the display is unlit or unresponsive, your thermostat may be broken, or the batteries need replacing.
Some of the most common thermostat issues include:
The thermostat is broken, not properly level, or dusty. The thermostat needs to be recalibrated. There is loose wiring causing a thermostat issue.
A reset brings back the default (or factory) thermostat settings and can help solve connection or programming problems. You can also try resetting the thermostat if it is showing incorrect readings.