Take a tape measure to your sink and measure the top of the counter surface to the nearest item above where your faucet will be. Then, select a product that fits in the available space.
Measure the Faucet Center
In other words, measure from the centerpoint of the far left hole to the centerpoint of the far right hole. Most faucet centers range between 4 and 16 inches, with widespread faucets typically measuring at 6 to 8 inches and centerset faucets measuring at 4 inches.
Before purchasing a new faucet, check the spacing on the sink. If there is a three-hole arrangement, determine the spacing by measuring from the center of the handle. Standard spacing is generally four or eight inches. If you prefer a single-hole faucet and the sink has three holes, don't worry.
Due to so many different styles, kitchen faucets are not universal. The base plate is often the differentiating factor with some the mounting holes are the standard 1 3/8” but there are also faucets on the market that have a 1 or 1 1/2” mounting hole.
Make sure to measure your faucet centers. This refers to the distance, in inches, between the pre-drilled faucet holes in the sink or vanity, from the very center of the left hole to the very center of the right hole. These center points should correspond to the center connections of the faucets to be installed there.
3-hole sinks allow for two-handle faucets only without accessories. 2-hole sinks allow for a single-hole faucet, and an accessory, like a sprayer. 1-hole sink has no deck plate, and is designed for a single-handle faucet.
What are the standard faucet hole sizes for kitchens and bathrooms? The standard faucet hole sizes for kitchens and bathrooms are 1 3/8″ (1.375 Inches or 34.925 mm) in diameter unless otherwise mentioned in the specification. However, faucet holes may vary in size depending on the particular make and model.
Not all bathroom sink faucets work with every sink, so it's important to make sure the faucet you choose will fit your sink or basin. Standard faucet drillings are centerset, single-hole or widespread.
Always consider the number of holes on the sink and their configuration. If you're replacing the faucet and keeping the existing sink, the configurations must match. But if you intend to replace the sink, this is less important since you can purchase a new basin to match the faucet configuration.
'Think of your cabinet hardware and kitchen faucet like jewelry,' says Xander Shreenan of Dowsing & Reynolds. 'One should complement the other; creating a beautiful and decorative kitchen that has been tailored to perfection. ' However, bear in mind that anything too matchy-matchy can look contrived.
While installing a kitchen faucet is not necessarily easy, it can be accomplished by inexperienced do-it-yourselfers in just a few steps. It doesn't require specialized skills beyond knowing how to turn off your water and how to tighten and loosen nuts and bolts.
So if you have a three-hole sink with the outside holes 4 inches apart, you should be able to install a single-handle bathroom faucet. However, a deck plate to cover all the holes is usually needed.
DIY Frequently Asked Questions / What does it mean when a faucet is said to have 8-inch centers? The faucet mounts with the fixture holes set 8 inches apart. It's important that you buy the right size faucet to fit.
Most faucet supply hoses are 1/2”, with a 3/8” compression fitting to connect to the building water lines. But still take note of measurements in your application, and make sure you have any necessary fittings to connect your new faucet to your water lines before you begin the installation process.
The most common faucet connection size is 1/2 inch. This is the size that most faucets use, including bathroom sinks and kitchen sinks. You can determine which size your current faucet uses by checking the pipes that are connected to either end of the faucet.
Size of the Faucet
On the other hand, if the faucet is too big, then you may end up splashing yourself every time you wash your hands or rinse the dishes. Not to mention, the faucet will overpower the sink.
Faucets are not universal, as they come in a variety of sizes, styles, and designs to fit different sinks, countertops, and bathroom/kitchen configurations. Additionally, faucets use different mounting systems and connections, which may not be compatible with all sinks or countertops.
Single-bowl sinks may best match up with longer faucet spouts or pull-out spray spouts, while double-bowl kitchen sinks work well with pull-down spray spouts. 2. Finish: Will your sink be made out of stainless steel or cast iron? With a stainless steel sink, a faucet with a stainless look matches up nicely.
Moen, Delta, and Kohler stand out as top faucet brands among master plumbers due to their quality and availability of repair parts.
Kitchen faucet FAQs
When you add on all the possible bells and whistles for both form and function, many higher-end faucets can run $600 and above. On average, a high-quality faucet from a trusted brand costs between $150 and $300.
Replacing a leaky or outdated faucet isn't as difficult as you might think. You can tackle the project with a basin wrench and a few other common tools. It should usually take no more than about an hour. The same steps apply if you're installing a new faucet onto a new sink.
XS-Size: An extra small faucet, ideal for small bathrooms, and usually used for cold water only. S-Size: The comfortable choice for standard comfort at the bathroom sink. M-Size: Add extra comfort with a higher medium height faucet. L-Size: A large faucet with a high spout is a practical & safe choice.
The most common size pipe for modern drains is 1 1/2 inches in diameter, but there are also 2-inch and 3-inch pipes available. Some older sinks may have even smaller pipes like 1 1/4-inch in diameter but these are not as common. If you have a standard kitchen sink drain, then a 1 1/2-inch pipe is typically sufficient.