You'll want to measure the height (top to bottom) and width (side to side) of all cabinet doors. It helps to note how many cabinet doors you have of the same same size, although we recommend double checking dimensions just in case some doors look like the same size, but are slightly different.
Measure the length: Start by measuring the back of one side of the cabinet (from back corner to middle edge), then do the same on the other side These measurements are typically the same, but they don't have to be. Measure the width: Then, measure the depth from the back corner to the front corner.
A 10×10 kitchen, used as the industry standard, is an “L” shaped kitchen that is 10 linear feet long by 10 linear feet wide. The price varies based on the design request but gives you an idea how many cabinets you will need and what the approximate cost is for a basic kitchen.
Standard kitchen cabinet heights include 12, 15, 18, 30, 36 and 42 inches tall; depth ranges from 12 to 18 inches. Typically installed 18 inches above countertops, 54 inches above floor and 24 inches above stove.
Pulls 3-7 inches in length will sit the most comfortably on doors less than 24 inches tall. Cabinet doors 24-36 inches tall are best adorned with pulls 7-12 inches long, while cabinets taller than 36 inches such as pantries, built-in appliances and pullouts should be accompanied by pulls longer than 12 inches.
Cabinet pulls give a sleek visually appealing look to cabinet doors and drawers. What usually looks best is a pull length that is about 1/3 the height of the cabinet door and 1/3 the width of the cabinet drawer. Your eyes follow the length of the pull up the height of the door or across the width of the drawer.
You can either use 36" tall upper cabinets, which allows for crown molding to be used along the top or you can use 42" tall upper cabinets that go all the way to the ceiling without any molding. Below is a breakdown of the pros and cons of each choice.
Standard cabinet widths vary depending on the cabinet type. Upper kitchen cabinets are 12, 15, 18, 24, 27, 30, 33, and 36 inches. Upper filler cabinets are 3, 6, and 9 inches wide. Standard base cabinet widths are 12, 15, 18, 21, 24, 26.25, 27, 30, 33, 26, 39 and 42-inches.
The Cabinet includes the Vice President and the heads of 15 executive departments — the Secretaries of Agriculture, Commerce, Defense, Education, Energy, Health and Human Services, Homeland Security, Housing and Urban Development, Interior, Labor, State, Transportation, Treasury, and Veterans Affairs, as well as the ...
Most kitchens are made in standard sizes, with cabinets measuring something around 720mm in height by 500mm in width. Where measurements change, this is usually by height rather than width. To fit the dimensions listed above, you'd typically be looking at a kitchen door measuring 715mm in height and 495mm in width.
Rather, most wall cabinets will have a format that looks like this: W2430. In this case, the W indicates that the cabinet is meant for a wall. The 24 number next indicates the width of the cabinet, and the 30 indicates a height of 30 inches.
The standard height for upper cabinets from the counter is 18 inches, or 1 foot and 6 inches. They shouldn't be less than 15 inches away or more than 20 inches away. This also means the height to where the bottom of your upper cabinets starts.
No. 1 Home Design Software of 2024
Designing a kitchen layout of 10 x 12 feet can be both exciting and challenging. This size is perfect for a small to medium-sized kitchen, offering ample space for functionality while still being cozy.
Finding the Measurements of Existing Cabinets
For accuracy, figure out the depth by measuring from the outside of each cabinet, not the inside.
Our standard 10x10 kitchen model includes 12 cabinets; two are exactly the same size and the other 10 are of different sizes. These 12 cabinets are always the same assortment of sizes in every model, ranging in size from 36" by 30" wall cabinets, to 18" wide base cabinets.
Cabinet Measurements
Record. Now multiply the height by the length. Now, measure and multiply the lower cabinets as you did the upper. Add these two total measurements, in inches, together and divide by 144 to get the square feet.
If you're going to have a new layout, measure the entire length of each wall to determine your cabinet configuration. Ceiling heights are typically 8 feet in older homes and 9 feet in newer homes. Measure from the ceiling to the floor in several different locations, including each corner and the center of the room.
Cabinets are grouped into four grades based on quality of construction: ready-to-assemble (RTA), stock, semi-custom and custom. Decide up front on the amount of money to be invested in cabinetry and then browse cabinetry lines and options within your budget.
For base cabinets, measure from the floor to the top of the cabinet space. For wall cabinets, measure from the top of the counter to the desired height of the cabinets. Standard wall cabinet height is often 18 inches above the counter, but this can vary depending on ceiling heights and personal preference.
For standard size cabinetry (dimensions of 12″ – 36″) the most common pull sizes are 3”, 4”, 96mm, and 128mm center to center (from one screw hole to another). Standard knob sizes are 1 1/4″ or 1 3/8″.
It's important for homeowners to easily reach items in their kitchen cabinets, regardless of their height. The average folk's height plays a role in the standard height of kitchen cabinets. If the cabinets were to touch the ceiling, most people would need a step stool or ladder to access top-shelf items.
Are 42” cabinets are worth it? In our opinion, YES, especially if you are already using a step stool from time to time to access your current top-shelf. You will increase storage space by 25% adding another shelf. People with extra storage space can store items they don't use very often in the extra cabinets up top.
Instead, to take your cabinets all the way to the ceiling, you'd need to use a stacked cabinet.