Baking soda, also known as sodium bicarbonate is naturally alkaline, with a pH of 8. When you add baking soda to your pool water, you will raise both the pH and the alkalinity, improving stability and clarity.
There are alternatives to chlorine including bromine, ionizers, and ozonators, though with each you'll still need to use some chlorine. A fourth alternative is PHMB, which doesn't require the use of any chlorine. All four have drawbacks, including cost.
What you may not know is that hydrogen peroxide is a powerful oxidizer that can be combined with ultraviolet light to disinfect swimming pools. The combination of ultraviolet disinfection with hydrogen peroxide allows pool owners to safely eliminate all chlorine in their pool or spa.
As a rule, you don't add more than 2.5 pounds of baking soda in a day. Instead, start off adding the required amount (e.g., 1.25 for 10,000 gallons of water) of baking soda that can raise the alkalinity of your pool to 10ppm. You can sprinkle your baking soda over the surface of the pool, or you pour into a skimmer.
Household bleach, Clorox and liquid chlorine can all be used to sanitize a pool. They are all types of chlorine. Household bleaches such as Clorox usually contain about 5-6% available chlorine, about half that of pool liquid chlorine. Household bleaches often have unwanted fragrances and colors.
I think the answer to your question is about 3-6 days. The problem is that the chlorine that you need to keep the bacteria in check is used up more quickly as the temperature rises, the activity increases, and as sweat and other body stuff is put into the pool.
The benefits of swimming pool salt
Using swimming pool salt instead of chlorine delivers greater swimming comfort: Swimming pool salt does not give off an unpleasant odour as chlorine does. It is much less harsh on hair and skin. It does not cause your eyes to sting.
The use of baking soda in pools can spot treat algae
It can turn any backyard pool murky green or cause unsightly black spots on the walls and floor of any swimming pool. If your algae come in the form of black spots, it can be extremely tough and frustrating to try and get off your pool's interior.
How do I keep a kiddie pool clean without chemicals? If you simply do not want to use chemicals to keep your kiddie pool clean, there is an alternative. Rather than chlorine, use Distilled White Vinegar. Add 1/2 Cup for every 100 gallons of water in your pool.
Vinegar contains acetic acid which makes it a great disinfectant. It is also acidic in nature hence removes dirt, grease and mineral deposits. If used in the right amount, its acidic nature also plays a role in lowering the pH of pool water.
Short answer: yes. Longer answer: it depends on the formulation. The label on every bleach bottle should tell you the ratio of sodium hypochlorite (and available chlorine) in the bottle to everything else. A higher percentage is generally better, as you'll need to use less bleach to treat your pool.
Maintenance is critical when it comes to the quality of your pool water. Well maintained pool water can last up to 5, maybe even seven years before you need to replace it. This means weekly cleaning, functional filters, and checking ph levels every day. Usage is a huge determining factor.
It takes a lot of chemicals to make pool water safe for swimming. Untreated water can accumulate harmful Escherichia coli and Salmonella bacteria and protozoans such as Cryptosporidium parvum and Giardia lamblia.
You normally need 6 quarts of bleach per 10,000 gallons of water, so to kill algae, you might want to increase this to 8 quarts ( 2 gallons) per 10,000 gallons. If the pool water is very green and cloudy, consider doubling the basic dosage. Just remember to stay out of the water until the chlorine drops to safe levels.
Common unscented household bleach (sodium hypochlorite) works well to shock a pool.
It is a good idea to wait at least 20 minutes after adding the water balancing chemicals. If you use calcium chloride in your pool, you should wait at least 2 hours to swim.
In theory, if you have a cloudy swimming pool, you can add chlorine to “shock it” and clear things up. Chlorine will get the job done. But, the amounts may vary and you may have to really pound the pool with chlorine to get the water totally clear.
Cloudy or milky swimming pool water is caused by seven main issues: improper levels of chlorine, imbalanced pH and alkalinity, very high calcium hardness (CH) levels, faulty or clogged filter, early stages of algae, ammonia, and debris.
Borax acts as an effective pH buffer and helps prevent algae growth in swimming pools. Plus, it will leave your water looking sparkly and feeling soft.