If your kid's pool is pretty small, and draining and refilling it doesn't feel like a colossal waste of water, then the best way to keep the kiddie pool clean is to drain it when the water's dirty, scrub it down with a plain old kitchen brush and some mild dish soap, and refill it.
How do I keep a kiddie pool clean without chemicals? If you simply do not want to use chemicals to keep your kiddie pool clean, there is an alternative. Rather than chlorine, use Distilled White Vinegar. Add 1/2 Cup for every 100 gallons of water in your pool.
Baking soda will raise the total alkalinity of the water. The alkalinity keeps the pH stable which then allows the bleach to remove more bacteria and contaminates. About a 1/2 of a teaspoon of baking soda will treat 26 gallons of water.
Dirty stagnant water can be a breeding ground for mosquitos, harmful algae, molds, etc. It is very important to drain the kiddie pool completely after every use. Allow it to fully dry under the heat to get rid of any moisture left. For cleaning, you can use bleach or vinegar (diluted in water) to disinfect it.
Salt is often presented as a healthier alternative to adding chlorine to a kiddie pool, since saltwater is gentler on the skin. This is particularly true of Epsom salt, which has a very different chemical composition from regular salt – it is magnesium chloride rather than sodium chloride.
A rule of thumb is 1.5 lbs. of baking soda per 10,000 gallons of water will raise alkalinity by about 10 ppm. If your pool's pH tested below 7.2, add 3-4 pounds of baking soda. If you're new to adding pool chemicals, start by adding only one-half or three-fourths of the recommended amount.
Many of us want to cool off in a backyard pool, but we also want to make sure there are no dangerous bacteria lurking in these pools that do not have any filtration system in place. You can use Clorox® Regular Bleach2 to treat the water in a child's wading pool.
The bleach recommended for pools is chlorine. If you don't want to keep emptying and refilling your small inflatable pool often, this is an option. But, use the right amount of chlorine bleach for pool sanitization.
I think the answer to your question is about 3-6 days. The problem is that the chlorine that you need to keep the bacteria in check is used up more quickly as the temperature rises, the activity increases, and as sweat and other body stuff is put into the pool.
Saltwater In An Inflatable Pool
They do make saltwater systems for above ground pools for those who don't want to use chemicals. For example, this Intex Pool Saltwater System found on Amazon. This is a great system for people who want to get rid of all the hassle that comes with using chlorine.
If you don't have a drain plug in your kiddie pool, but you have a nearby hillside, you could use a garden hose to siphon most of the water out, to a point where you can flip it over to empty fully. An easier method would be to use one of our small submersible pumps.
Many of us use household bleach, a common brand name being Jik, to clean our homes. Bleach itself is a diluted solution of sodium hypochlorite and it is this ingredient that can be used to lighten, sanitize and disinfect.
Without Chemicals
If a parent chooses not to use chemicals in the kiddie pool, the water must be drained after the children are done using it. This should occur within 24 hours. That means the parents must go through the hassle of filling the pool with fresh water each day. This is not a good use of water.
Skimmer Net
With excessive debris in the water like leaves, pine needles, and dirt, the pool walls will get slimy and grow mildew faster.
For the greatest protection against algae, bacteria, and cloudy water, Intex pools should maintain a chlorine level of 2.0-4.0 ppm at all times.
Baking soda is safe and straightforward to use, while also providing your pool with a clean, clear, sparkling water that is pleasant to swim in. Baking soda does not sting the eyes; neither can it cause drying of the skin.
The use of baking soda in pools can spot treat algae
It can turn any backyard pool murky green or cause unsightly black spots on the walls and floor of any swimming pool. If your algae come in the form of black spots, it can be extremely tough and frustrating to try and get off your pool's interior.
There are alternatives to chlorine including bromine, ionizers, and ozonators, though with each you'll still need to use some chlorine. A fourth alternative is PHMB, which doesn't require the use of any chlorine. All four have drawbacks, including cost. Chlorine is relatively cheap.