Vinegar, baking soda and water would be enough to make your tub shine. Sprinkle baking soda on the stained areas of the tub. Then mix vinegar with water and spray the solution on the surface of your acrylic tub. Leave it for a few minutes.
You can turn a bathtub white again with hydrogen peroxide, which works as a natural bleach without the harsh odor. Put hydrogen peroxide in an opaque spray bottle and spray the bottom of the top. Let it sit for 15 minutes, then rinse.
Mix baking soda with enough hydrogen peroxide to form a thick paste, and apply the paste on stubborn stains. Use a sponge or a soft-bristled brush to scrub the gentle abrasive into the surface without scratching it. Let the paste sit until dry, then rinse out the tub with warm water, or wipe any excess off.
I would try using fairy liquid dish soap or dawn soap to wash the tubs, it removes build up and dirt and is safe on acrylic. As for the grittiness, try the dish soap see what it's like after that, it may be a build up of product rather than it's being ruined for good or calcium build up maybe.
White vinegar is a natural cleaner that can help lift stains from acrylic surfaces. Dampen a clean cloth with white vinegar and gently rub the affected areas. Allow the vinegar to sit for a few minutes before rinsing with clean water.
Try running the bathroom fan and cracking the windows to speed up the process.) Mr. Clean Magic Eraser Bath is safe to use on acrylic tubs, but definitely skip the bleach.
Here's what you should avoid to keep your tub looking its best: Harsh chemicals: The best acrylic tub cleaner is one that doesn't contain bleach, ammonia, acetone, or any abrasive chemicals. These substances can break down the acrylic, dull the finish, or cause discoloration over time.
Chemicals we do not recommend using to clean acrylic showers/tubs: Solvents (turpentine, lacquer thinner, mineral spirits, paint thinner, MEK ((Methyl Ethyl Ketone, also known as Butanone)), xylene, acetone, naphtha, etc.) Simple Green® All-Purpose Cleaner. Pine-Sol® Original.
A common and effective cleaning solution many homeowners use is a mixture of white vinegar and warm water. Add both to a spray bottle, spray the acrylic surface, and let sit for around 15 minutes. Wipe the surface down with a soft sponge or microfiber cloth, and rinse the tub with clean, warm water.
if you have a fiberglass, cast-iron, porcelain, or acrylic bathtub give these two products a try Bar Keepers Friend and a Pumie scouring stick do a great job at cleaning these types of bathtubs!
How do I get my bathtub white again? By cleaning your bath with a mixture of white vinegar, water and baking soda, you should be able to rid your bath of most common stains and maintain its white finish.
In order to clean your tub properly and keep it safe, you can use such products as baking soda, borax powder, shampoo and white vinegar. These things are absolutely safe not just for the acrylic bathtub, but for your skin as well.
Avoid Abrasives and Pads
Scrubbing pads and abrasive cleaning products — even “soft” scrubs and textured dish sponges — can scratch the acrylic finish. Acrylic tubs need only soft and slippery materials and cleaning products.
To eliminate stubborn stains or restore a dull surface, lightly sand the bathtub's surface using fine-grit sandpaper. Employ gentle circular motions while sanding to prevent scratching the acrylic material. After sanding, clean the surface once again with a mild cleaner and rinse thoroughly to remove any residue.
Cleaning Method 1: Use an acrylic-safe cleaning product.
Some of the more popular brand names that are perfect to use include: Formula 409® All-Purpose Cleaner. Dawn® Dish Soap (or Your Favorite Brand) CLR® Bath and Kitchen Cleaner.
Your dull acrylic tub may simply be a victim of soap scum or hard water deposits. You may be able to restore the shine with one of these solutions. Mix 2 cups of white vinegar and 2 cups of water in a spray bottle. Spray the tub and allow to sit for 15 minutes.
1. Wipe the surface of the acrylic with dish soap or a solution of equal parts vinegar and water using a damp TUB SCRUB CLOTH OR SPONGE. Harsh chemicals should not be used as they can damage the surface and affect your water chemistry. 2.
4. For stubborn stains, you can use a magic eraser sponge, these are safe to use and will not damage the surface of your tub. 5. Bacteria does not naturally live on the smooth acrylic surfaces, but if you are concerned, a mild anti-bacterial liquid or gel can also be used on a soft cloth.
The average lifespan of an acrylic bathtub is 10 to 15 years, making it a long-lasting investment. You can expect your new acrylic bathtub to stand the test of time and provide you with years of enjoyment.
Make an eco-friendly bathtub cleaning paste using hydrogen peroxide (one part) and baking soda (two parts). You can also use cream of tartar in the place of soda. Then apply the paste on the stains and allow it to stand for 40 to 60 minutes. Take a sponge and rub the surface and wait for another few minutes.
As the hours pass, the dish soap loosens and lifts away the grime that has taken residence on your bathtub's surface. This gentle, overnight process ensures you awaken to a bathtub that radiates brilliance, saving you time and effort in the long run.
Acrylic - As per instructions by this article from Edmond Bathtub Refinishing, Bar Keepers Friend is their recommended cleaner for any acrylic bathtub finish.