White vinegar is a good remedy to clean stubborn toilet stains. Pour a 120ml bottle of white vinegar into the toilet bowl and put down the lid. Don't use or flush the toilet for eight or so hours, then use a toilet brush to scrub.
The contaminants notorious for causing brown stains in toilet bowls are iron, manganese and sulfur. These pollutants can also produce iron bacteria, manganese bacteria and sulfur bacteria, which also can produce brown stains.
Brown stains are the result of hard water and not your cleaning wrongly. Don't use bleach as it will only bleach out the stain, but not remove it. Use a clean brush with plastic bristles.
A few different things can cause the brown build-up at the bottom of your toilet bowl. One possibility is that your water contains a high level of iron, which can leave behind rust-colored stains. Another possibility is that you have hard water, which can also cause mineral deposits to accumulate in your toilet.
For this cleaning task, the more, the merrier, pour vinegar (about 1 litre) and a few cups of bicarb will work fine. Give the solution a mix until you have a paste. Then, add it to the toilet bowl and leave it to soak for as long as possible, at least an hour.
To safely and inexpensively clean your toilet bowls, pour a generous glug of vinegar, followed by a heavy sprinkling of baking soda, into the bowl. While the mixture is bubbling up, scrub the bowl (get under the rim, too). Let it soak for 30 minutes and flush. That's it.
White Vinegar and Baking Soda
Distilled white vinegar is a natural cleaner, disinfectant, and fungicide, and baking soda is a natural deodorizer, whitener, and mild abrasive. This stain remover combo works best when you need to know how to get rid of toilet stains caused by minerals or mold.
When cleaning a toilet bowl, WD-40 works by softening the rust and lime deposits, so they can be easily wiped away. You don't need to use much of it. Simply spray on the affected area, wait a minute or two and brush it away with a regular toilet brush.
CLR's unique formulation has multiple uses! Safe for various applications and surfaces… (tubs, showerheads toilets, sinks, porcelain, glass, cement, stucco, brick, stainless steel, and much more)!
The carbonic acid that is in coke is what helps to clean toilet stains. Picture the acidity slowly working its way through the stains, melting them away. It can take a while depending on how stubborn the stain is which is why it's vital to have a suitable cleaning method depending on how bad the toilet condition is.
OxiClean™ Bathroom Cleaner can help you thoroughly clean both the toilet bowl and around the base in an effort to keep scum buildup at bay.
You may start to notice improvement in as little as 15 minutes, though that is the minimum time your dish soap should sit in the toilet. Again, we prefer to let it sit overnight whenever possible. Once enough time has passed, go ahead and flush your toilet.
If you want to really get your toilet tank clean, then you need to make sure you have the right cleaning products for the job. Vinegar is a great toilet cleaning solution. Not only is it free of chemicals and naturally antibacterial, it's also an acid, so it will remove minor lime and calcium deposits.
If the clog still seems to be intact, start over at step 1 and repeat the process a couple of times. For extra-stubborn clogs, you can let the fizz mixture sit overnight or combine this method with plunging.
Vinegar will not damage your toilet in any way if it's left in your toilet overnight. In some cases, leaving the vinegar in your toilet overnight is recommended to get the best cleaning results. No matter what material your toilet is made from, the vinegar will not damage your toilet.
Make a paste by mixing 1/2 cup of Borax and enough vinegar to form a thick paste. Spread the paste immediately onto the hard water stains in the toilet so they are completely covered by the paste. The Borax will harden quickly so don't add the vinegar until you are ready to apply the paste.