Step 2: Find the drain hose at the back of the washing machine. The drain hose resides behind your washer and connects the washing machine to your exterior washing machine drainpipe.
The drain hose, which provides drainage for the washing machine, is attached to the back of the washer by a clamp. Hold the clamp your pliers as you unscrew it, then pull the drain hose away.
If there is standing water in the washer tub following the final spin cycle, or there is water leaking from the bottom of the washer cabinet, the washer's drain pump or drain hose could be clogged or broken and preventing the water from being emptied from the appliance into a laundry tub or standpipe.
Some washing machines don't have a drain hose. If that's the case with yours, you can turn the drain pump filter anti-clockwise and pull it out, so the water can drain in the tray below.
Detach the drain hose from the back of your washing machine. Use a funnel to pour about a quarter of a cup of baking soda into the pipe. Next, empty a baster full of vinegar into the drain hose. Top tip: If the blockage is not completely gone, you can repeat the above process.
Pour baking soda and vinegar in the drain or hose for a natural option. Pour some boiling water down the drain or hose, then sprinkle some baking soda inside the drain or hose. Pour a cup of white vinegar down the drain wait 5-10 minutes. Then, reconnect everything and run a test cycle to confirm the blockage is gone.
If your washing machine drain hose is leaking, split, torn or damaged, your washing machine won't be able to drain or function properly. As such, the drain hose will need to be replaced to get your appliance working properly again.
Lower the washing machine drain hose into your bucket. Once the bucket is full, connect the drain hose back to the pipe so you can empty the water into your sink. Repeat the draining process until the washing machine drum is empty.
This could be due to lint, debris, or even small items of clothing becoming lodged within the hose. To check for blockages, remove the drain hose from the drain outlet and visually inspect it. If you find any obstructions, remove them, and reattach the hose, ensuring it's securely in place.
Clear things out by mixing equal parts of hot water and vinegar and pouring the mixture through the drain pipe. Wait half an hour, then reconnect the drain pipe, plug in your machine and run a wash cycle.
Make Sure to Balance the Load
One of the most common, and easiest to fix, is when the washer cannot reach the spin speeds it needs to remove water from the clothes. This is often caused by the load being unbalanced. The issue often occurs when washing bulky items like blankets or towels.
Check drain hose problems
Remove the drain hose from the back of the washer. Run a moderate to high pressure water stream through it. If it is clogged, this should force the clog out.
Regardless of their condition, washing machine hoses should be replaced about every 5 years to prevent a flooding emergency. Standard washing machine hoses are made of black rubber. Unfortunately, these hoses only last a few years and will eventually fail, causing one big mess and costly water damage.
It is constantly submerged in water and soap, so people generally think that a washing machine doesn't need to be drained or cleaned out. However, even with water inside it, a washing machine can be a breeding ground for germs, or worse, Salmonella.
A washing machine not draining can have multiple causes, including a clogged or jammed drain hose or a broken pump, lid switch, or belt. No matter the culprit, you need to drain the water from the washing machine before diagnosing the issue or doing any work to remedy the situation.
Drain it with a hose
This can usually be done by unplugging it from the wall outlet or turning off the circuit breaker that controls the washer. Locate the drainage hose. This is usually a flexible hose located at the back of the machine, near the bottom. It may be connected to a standpipe, a sink or a bucket.
Most washing machines come with the drain hose already attached to the back. It's usually a long, grey hose. Some machines also come with a U-shaped bracket. This is for hanging the drain hose up, which stops dirty water going back into the machine.
Manual draining
For more stubborn situations, try this manual method to drain your washing machine: Find the drain filter, usually located at the front bottom of the machine. Place a shallow container and towels beneath to catch any water. Slowly unscrew the filter, allowing water to flow out gradually.