How do I dry my bathroom after a shower?

Author: Rubye Lind I  |  Last update: Sunday, September 7, 2025

Once you've finished your shower or bath, simply get a towel and dry those surfaces which might have gotten wet or have a visible condensation layer. Surfaces with regular moisture build-up tend to be the windows, mirrors and tiles/wall panels. Make sure you prioritise these when drying surfaces.

How to remove moisture from bathroom after shower?

You really have only two choices; 1: towel down the shower when you are through and remove any wet towels, etc from the room and run the exhaust fan for an hour, or 2: leave the wet towels etc in the bathroom and use a dehumidifier.

How to fix bathroom walls wet after shower?

Fit an extractor fan

If your bathroom has a window that can't open or doesn't have a window at all then this is a good alternative. A good tip is to leave the fan running with the bathroom door closed at least 15 minutes after your shower or bath to make sure most of the moisture has been extracted.

How to make a wet bathroom dry?

Use a dehumidifier placed at the highest setting possible to dry the floors. Place it in the center of the room and leave it on for at least 24 hours. Next, place fans around the room so the entire surface receives the blowing air.

How do you absorb moisture in a bathroom?

While you can never eliminate condensation, some simple steps can help prevent mold buildup and the likelihood of expensive water damage.
  1. Use the Fan. ...
  2. Open the Windows. ...
  3. Passive Ventilation. ...
  4. Wipe Down Tiles, Mop the Floor. ...
  5. Demist your Mirror. ...
  6. Wet Clothing & Towels Placed Outside. ...
  7. Take Shorter, Cooler Showers. ...
  8. Use a Dehumidifier.

HOW TO CLEAN BLACK MOLD OFF BATHROOM SEALANT - EASY CLEANING HACK

What soaks up moisture best?

Rock Salt. The most popular DIY dehumidifier is the one that works the best—rock salt. Rock salt naturally absorbs moisture out of the air, making it a great choice to use as a dehumidifier.

How do you moisture proof a bathroom?

7 Steps to Waterproof Your Bathroom and Bathtub
  1. Step #1 – Planning.
  2. Step #2 – Surface (Walls and Floor) Preparations.
  3. Step #3 – Use Caulk to Seal Joints.
  4. Step #4 – Use Waterproofing Membrane.
  5. Step #5 – Choose Waterproof Materials for Your Bathroom.
  6. Step #6 – Ensure Fixtures are “Fixed” Properly.
  7. Step #7 – Regular Maintenance.

How to dry a small bathroom?

9 ways to keep a small bathroom dry
  1. Exhaust Fans.
  2. Dehumidify.
  3. Absorb the moisture.
  4. Fan it out.
  5. Squeegee.
  6. Use your hair dryer.
  7. Minimizing your shower time.
  8. Vacuum your windows.

How to get moisture out of a bathroom without a fan?

Purchase a portable dehumidifier

Small, portable dehumidifiers can be placed in the bathroom and used during and after your shower to reduce humidity. These can be used in conjunction with a whole home dehumidifier.

Should bathroom doors be open or closed after shower?

Keeping your shower doors closed at all hours of the day locks in moist air and can lead to mold. After you shower, the interior space is at its wettest point. Try to keep the doors open for a half hour or so until the steam clears. If you have a fan in your bathroom, make sure to turn it on and let the air circulate.

Why is my bathroom holding moisture?

This is because a large amount of moisture is produced when you shower or take a bath, increasing the humidity level in the room. If your bathroom is not well ventilated, humid air will condensate on surfaces and lead to mould growth. Bathrooms contain surfaces that are prone to condensation.

Why is my bathroom so wet after a shower?

Condensation forms when moisture is released into the air and mixes with water vapour. Once this makes contact with cold surfaces, the droplets form on areas such as mirrors and windows. After a shower or bath, water droplets form on the window, walls and mirror when the warm, damp air is cooled by these cold surfaces.

How to dehumidify a bathroom naturally?

Try to take cooler showers when you can, and keep the door open to the bathroom when you can to increase the air circulation. Another effective way to dehumidify your home naturally is by turning on the bathroom's exhaust fan every time you take a shower.

How quickly does DampRid work in bathrooms?

DampRid crystals work immediately to absorb excess moisture from the air. The crystals harden and form a solid mass. Then they begin to dissolve and liquid will begin to drip into the bottom chamber. It may take a few days before liquid begins to drip.

How to dry a bathroom faster?

Here are some tips on how to make your bathroom dry faster:
  1. Turn on the exhaust fan. ...
  2. Wipe down the shower or bathtub after each use. ...
  3. Use a squeegee to remove water from the shower door and walls. ...
  4. Mop the bathroom floor after showering or bathing. ...
  5. Place a bath mat or towel on the floor outside of the shower or bathtub.

How do you dry bathroom walls after showering?

In this guide, we'll talk you through the steps you can take to get rid of that unwanted mist.
  1. Use an Extractor Fan. One of the simplest solutions to remove condensation is to open a window. ...
  2. Wipe Surface Dry. ...
  3. Install Wall Panels. ...
  4. Use a Dehumidifier. ...
  5. Have a Cooler Shower. ...
  6. Demistable Mirrors. ...
  7. Regular Cleaning. ...
  8. Use Anti-Fog Spray.

How long to leave a bathroom window open after a shower?

To let moisture escape, leave your bathroom window open during showering and for at least 15 minutes after. If your bathroom doesn't have any windows, leave the door open instead. Some plants, including spider plants and snake plants, can also help remove moisture from the air.

How do you dry a wet bathroom?

Keep windows open after showering to dry your wet room, and install an extractor fan if you don't already have one. Another way to keep your wet room floors dry and prevent slipping is to use a dry mop to soak up any excess water after showering.

What is the cheapest way to waterproof a bathroom wall?

Bathroom waterproofing with liquid membranes is perhaps the easiest and cheapest modern method of waterproofing, which can be applied to any surfaces that come into contact with water or moisture.

What is the best thing for a damp bathroom?

Open a window

Opening a window is the easiest solution to allow the humid air to escape, replacing it with fresh, dry air instead. It's a good idea to do this before taking your bath or shower, as the condensation can escape straight away rather than lingering in the room.

What is the cheapest homemade moisture absorber?

Baking Soda: Baking soda is cheap and easy to find. It's great for small areas and helps neutralize odors while absorbing moisture. Use it in closets or cabinets.

How long does it take for baking soda to absorb moisture?

Apply baking soda

The longer you let the soda sit, the better. At an absolute minimum it should be left for 30 minutes. By doing this, the baking soda will absorb the moisture and odours embedded in the mattress.

What is a natural dehumidifier?

Plants are natural dehumidifiers because they absorb water from their surroundings through their leaves and release moisture back out through transpiration. This process helps regulate humidity levels and create fresh air in any space! And some plants are better than others.

Previous article
What is the best primer to block mold?
Next article
How many hours to install an exterior door?