Connecting a Kwikset smart lock to a hub (such as SmartThings, Hubitat, or Home Assistant) requires placing your hub in "inclusion mode" and using the lock's interior pairing button to sync the security keys.
If your home network's Wi-Fi credentials have changed, for Halo Select you can perform the Wi-Fi reconfiguration from the App. Go to the Lock Settings in the Kwikset App and select “Wi-Fi Settings”. Understand the Network Requirements listed in the page and click on “CONTINUE”.
Kwikset Halo Select Smart Lock Keyless Entry Door Lock Wi-Fi and Matter Enabled Deadbolt No Hub Needed, Geofence Auto-Unlock, Grade AAA Certified, Easy Install, Satin Nickel Lifetime Finish Warranty.
1) Tap CONNECT TO SMARTTHINGS at the bottom of the screen to open the Samsung SmartThings App. 2) In the SmartThings App, add device > Partner devices > Search for Kwikset > Select Kwikset Brand (under Brands) > Kwikset Halo Wi-Fi > select your device.
To put your smart lock in pairing mode, ensure your phone has Bluetooth/Wi-Fi enabled and you are standing close to the door. While methods vary, most smart locks fall into one of the following categories:
You need wifi to do the initial setup, but the lock works without wifi once it has been configured.
Yes, you can control Halo with your smartphone using the Kwikset App.
To factory reset a Kwikset Halo, remove the battery pack, press and hold the program button while reinserting the batteries, and hold for 30 seconds until it beeps. Release the button, press it once more, and the lock will flash red and green while recalibrating its orientation.
On Kwikset locks, the program button is located on the interior side of the door (the part facing inside your home). To access it, you usually need to remove the battery cover or the interior assembly cover.
Your Kwikset lock most likely won't pair due to a low battery, an existing network memory clash, or Bluetooth/Wi-Fi interference. The most effective and immediate fixes for these common smart lock pairing issues are detailed below.
To put your Kwikset Halo smart lock into pairing mode, start the setup process in the Kwikset App. Remove the interior cover of the lock, press and hold the "A" button (the pairing button) for 3 seconds, and release it when you hear a beep and the LED flashes blue.
To connect your Kwikset Halo or Aura smart lock to Wi-Fi, you must first pair it to your smartphone using Bluetooth. Make sure you have the Kwikset App downloaded and an active account set up before beginning.
Press and hold Pairing Button on the left side of the interior unit for 3 seconds. Release Pairing Button when the lock beeps and the Status LED flashes Blue. Follow the onscreen instructions to complete Bluetooth pairing. Pairing to Existing Lock Open the Kwikset app on the phone you would like to pair to the lock.
No smart home hub required.
All you need is a WiFi router + smart phone + HALO smart lock. It's that easy!
The short answer: No, you won't be locked out. Most smart locks have backup ways to work without Wi-Fi. However, some features will be temporarily disabled. By the end, you'll know exactly how to handle a Wi-Fi outage without compromising security or convenience.
To connect your Halo device to Wi-Fi, you will generally use the corresponding mobile app for your specific product (e.g., Kwikset Halo lock or Ideal Halo heating). Ensure your phone has Bluetooth enabled and you know your home Wi-Fi password.
No, the Kwikset Halo is not Z-Wave compatible. The Halo line primarily relies on built-in Wi-Fi and Bluetooth technologies to connect directly to the Kwikset App and smart assistants like Amazon Alexa or Google Assistant.
It enables secure, low-power communication between devices, making it ideal for battery-operated products, such as smart locks. Because Z-Wave uses a mesh network, it extends connectivity through nearby devices, meaning locks on the far side of a home still receive strong, reliable signals.