And don't forget about utility or broom closets. These tend to be on the slimmer side, often measuring between 12-18 inches in depth, providing just the right amount of space to keep brooms, mops, and cleaning essentials.
Utility closets: Shelves in utility closets, which store cleaning supplies and tools, often measure 16 to 24 inches deep to accommodate larger items like vacuum cleaners, brooms, or bulk storage bins.
The Laundry Closet (2 Unit) layout has a typical width of 5' (1.52 m) and depth of 36” (91 cm) for an overall area of 15 ft2 (1.39 m2). When stacked, a counter height of 36” (91 cm) is common, while a counter height of 42” (107 cm) is used when units are side-by-side.
It is best to use for just washing and drying cloths as the space doesn't allow for much else. Possible dimension arrangements: 8 to 10 feet in width, 8 to 10 feet in length (64 to 100 sf). This is around the typical size and square footage seen in many homes today.
Some Important Numbers to Keep in Mind
A clothes closet should have a minimum depth of at least 24 inches deep, so the clothes can clear the back wall. Shelves for women's shoes should be spaced about 6 to 7 inches apart. Shelves for folded clothes should be placed around 12 inches apart.
Ideally, the depth of a closet should be at least 22 to 24 inches deep, although they can be as deep as 28 inches—ideal for storing bulkier items such as coats. Standard-sized adult clothes hangers typically measure 17 to 19 inches, so you want a closet with enough depth to accommodate them.
A standard closet is generally 24 inches deep and 72 inches wide. However, widths can vary greatly from 48 inches to over 96 inches, depending on the design and available space.
A utility closet is a cabinet, closet, or storage space for your cleaning supplies.
Mechanical rooms need space for the air exchanger too. It is now a code requirement for all houses to have an Air Exchanger (HRV/ERV). The recommended minimum size for a rectangular mechanical room is approximately 72” in depth and 54” in width.
The comfortable recommended depth of a closet is 24” (61 cm), but closet depths as narrow as 20” (50.8 cm) can be used if desired. Shelf depths of 12” (30.5 cm) should be used for shoes and smaller clothing elements.
A narrow laundry closet should be at least 32 in. wide to allow for hoses (when the supply is located to the side) and machine vibration, and 40 to 50 in. deep (about twice the depth of a standard closet).
The typical reach-in linen closet can be found either in a bathroom or a hallway near the bedrooms and is 30 to 36 inches wide and 15 to 24 inches deep, says Scott Davis, vice president of product development and marketing at Closetmaid, a storage system manufacturer.
A custom closet design can be as deep as structurally sound, but the most common depths found are 12”, 14”, 16”, 20” and 24”. In most cases, designs go as tall as 84-96” or in some cases even taller.
If you're planning a big remodel you may be wondering if you can put your electrical panel in your closet. The short answer is: nope!
Tall pantry or utility cabinets are often the roomiest of kitchen cabinetry. Standard tall cabinets are 12 or 24 inches deep and come in 12-inch, 24-inch, or 36-inch widths.
Hope this answers your question. Chapters 33 through 42, the dimension of the working space in the direction of access to panelboards and live parts likely to require examination, adjustment, servicing or maintenance while energized shall be not less than 36 inches (914 mm) in depth.
Situate the mechanical room on the garage side of the house – The rooms over the garage have the longest heat runs so it's best to have them as close to the furnace as possible. Situate the furnace along the beam whenever possible – This allows the duct lines to be bulk headed in with the beam down the road.
Machinery rooms shall be mechanically ventilated to the outdoors. The free opening area in square feet (m2). The mass of refrigerant in pounds (kg) in the largest system, any part of which is located in the machinery room.
That is why it is critical to have your utility room properly sized or ventilated to ensure there is enough available air to make a complete combustion and hence keep carbon monoxide generation to a minimum.
Sure, it's not a traditional location for that extra toilet, but it makes sense and really works. The plumbing is going to be there already, so it's a case of optimising the space. If there's no foul waste pipe you can install a macerator.
For bulkier items like coats or fancy dresses, you might need deeper sections. In these cases, extending the depth to 28 or even 30 inches can provide the extra space needed to keep your clothes comfortable and well-maintained without getting cramped or damaged.
Before designing a custom closet solution, it's important to assess the space that you have and what you want to use the space for. For example, a shallow closet with less than 22 inches of depth won't be usable for hanging clothes, so storage should be geared more towards solutions like shelving or drawers.
Pax Heights and Depths
There are 2 different size depths of Pax, a 14″ and a 22″. The 22″ is meant to house hanging clothes. The 14″ would have the hangars hanging out of its “box”, so its traditionally used for shelves, shoe storage, or shallow drawers. Both systems use the KOMPLEMENT accessories.