Standard sink base cabinets are 24″ deep (back to front), and most sinks are designed to fit that size. However, widths vary widely and sink widths vary accordingly.
You should have roughly 24'' from front to back to work with, which will be enough space for any standard sink. It's unlikely that you run into trouble with this dimension, but it's good to double-check just in case.
Although for tiny kitchens, experts recommend a length of at least 56 to 69 centimetres. In terms of depth, kitchen sinks should be at least 17.8 to 18.4 centimetres deep – if they aren't, your dishes will pile up quickly and reach the faucet – 20.3 centimetres and up would be ideal for heavy dish loads.
Measure the opening width under your existing sink (or where the new one will be installed) from left to right. This measurement is your cabinet size. Then, allow at least 2-3 inches on both sides for mounting hardware. For example, a 36" cabinet can accomodate a 30-32" sink.
Depth: The depth of base cabinets without the countertop typically measures 24 inches. Adding the countertop will create an overhang between one to two inches.
A 30-inch wide or a 36-inch wide cabinet are most common. The height of the cabinet can be customized, but 36 inches is average. A typical 33 x 22-inch sink will fill a 36-inch base cabinet.
Their depths are certainly never identical. In fact lower cabinets are usually two feet deep, covered by a countertop that is longer only by an inch. Presumably designed to stay out of the way and create an uninhibited work space, upper cabinets therefore were made with a usual depth of only twelve to fifteen inches.
To determine the maximum sink size for your base cabinet, measure the interior of your cabinet and subtract two to three inches from each dimension. A 36″ base cabinet can handle a 33″ sink at most; a 30″ cabinet should be fitted with a sink no larger than 27″ wide.
Another larger option, that provides more variety in its use is a 29" double bowl sink. This sink will fit in your 30" kitchen sink base cabinet and provide you with two 16x13"basins.
The recommended size for a 36" base cabinet is a 33" farmhouse sink or smaller. It is recommended that your base cabinet be 3 inches larger than the size of the farmhouse sink you are considering to install.
Kitchen sink depth:
The standard depth is around 8 to 10 inches. Anything shallower than 8 inches will make it difficult for you to have enough space to wash dishes. The extra depth can make it easier to wash oversize pots, which is helpful for anyone cooking for a big family or entertaining guests.
A sink depth of at least 10 inches will give you the room you need to wash larger dishes without splashing water all over the floor and surrounding countertops. Keep in mind that if you are going with an undermount sink, you will gain the additional depth of the countertop thickness.
The depth of a kitchen sink depends on personal preference and needs. Standard sink depths range from 8 to 10 inches, but deeper sinks, such as 10 to 12 inches, can provide more capacity for large pots and pans.
A 33" cabinet is outside measurement. Figure 3/4" wall thickness, so the inside measurement of the cabinet is 31½". You can possible squeeze the sink in there. It will be difficult to get at the side clips.
Yes, you definitely can! Something you should keep in mind, though, is you'll have to cut out the front of the cabinet and remove the counter top prior to farm sink installation. If you want to make the job easier, consider getting a retrofit farmhouse sink, which is meant for a standard kitchen sink base.
Double Basin/Bowl Sink
The most popular type of kitchen sink arrangement, dual basins allow for washing on one side and rinsing or drying on the other side.
The most common sink sizes for a 30-inch cabinet are 24 to 27 inches wide. These sizes offer a comfortable fit within the cabinet and provide enough room for daily use.
Dawn 22" Undermount Stainless Steel Kitchen Sink
This little gem measures overall at a little less than 22" left to right. This allows this sink to very easily fit in a 24" sink base cabinet.
The reason for this is to allow for adequate room to work when installing the sink, as well as to avoid potential water damage or mold growth in the cabinetry. The minimum cabinet size needed for your sink will be found on the product page from our website once you search the model like the example shown below.
The most common sizes for a kitchen sink are 30" or 33", however a standard size could measure anywhere between 24" and 36" in length. Generally, sinks up to 30" will contain one large single bowl.
No matter what you do, you will most likely need a special or custom cabinet to accommodate your new farmhouse or apron sink. This is because there are many styles of sink designs and how they need to be installed, typically requires a non-standard cabinet. The two most common types are Drop-in or Undermount.
The least amount of space that should exist between the countertop and upper kitchen cabinets is 18 inches, but it may even go up to 20-22 inches.
Lots of people install the lower cabinets first. Once the lowers are in place, it's easy to use them as a handy shelf for holding tools and for bracing the uppers as you install them. As you see in the video, we like to install the uppers first with nothing underneath them to get in the way.
Below, we list the standard size for the kitchen cabinet of each type. Base cabinets: Rest on floor to support countertop. Typically, between 34 1/2 to 36 inches tall and 24 to 30 inches deep.
No, all upper cabinets are not the same depth. The standard depth for an upper cabinet is 12 inches, but some kitchen cabinets may be as deep as 24 inches. The size of your upper cabinets will depend on the size of your kitchen and the type of base cabinets you have.