How can I control my pool with my phone?

Author: Prof. Ashly Pollich V  |  Last update: Sunday, June 26, 2022

How To Control Your Swimming Pool with Your Smart Phone?
  1. Monitor and control pumps.
  2. Turn pool and spa lights on and off.
  3. Check or change the temperature settings.
  4. Monitor solar heating systems.
  5. Check on major water features like water jets or waterfalls.
  6. Control lights for landscaping located around the pool.

How can I control my pool pump from my phone?

iAquaLink allows pool owners to control their pools anytime, anywhere. The application is free and is available on the Apple and Android markets. The iAquaLink Web Connect device is a configurable system that is accessible anywhere you have an Internet connection.

Can I control my pool heater from my phone?

The HeaterReader™ is a smart wireless automation device that gives you control over your swimming pool's heater and pump, from anywhere in the world, using our IOS or Android mobile app or from your computer. Installation of the HeaterReader™ is less costly and less complex than other currently available devices.

How much does it cost to automate your pool?

A pool automation system can cost anywhere from $1,500 to $3,500. This upfront cost depends, as always, on multiple factors: Your pool type, size, and complexity. Whether or not there's a spa.

What is a smart pool system?

A pool automation system allows you to connect your pool's equipment to one central hub via wifi and control center. The system's corresponding mobile app then allows you to control those features from your phone. Most automation systems can also connect to Echo or a similar smart device.

iAqualink pool / spa phone control upgrade for Jandy Aqualink control systems

What is a pool controller?

Automatic Pool Controls are used to control multiple functions of your swimming pool from the comforts of your home. They allow you to do such things like turn on and off the pool pump, control the temperature of your pool heater, or turning on and off your pool lights.

How much does OmniLogic cost?

How Much Does it Cost? Hayward OmniLogic installations can start at $2,800.00 and run upwards of $4,500.00 depending on added accessories.

What is OmniHub?

Hayward OmniHub is the easiest way to add smart control to a pool and spa. Compatible with Hayward and most other brands, pool owners have the ability to conveniently schedule and set all their equipment settings with their smartphone or voice assisted devices.

What is a pool management system?

Pool management involves being able to mold or shape your workforce so it's easier for your employees to respond to new market trends and ever-changing customer demands.

Is the iAquaLink app free?

INTELLIGENT POOL CONTROL FROM YOUR SMART PHONE OR TABLET. iAquaLink allows you to control your pool anytime, anywhere. Using our free app, you can control all the elements of your pool or pool/spa system, even when you're on the go. Have the pool or spa ready to use as soon as you get home.

How do I control my Hayward pool heater remotely?

The heater can be remotely controlled using the firemans switch. That is the way pool automation controls heaters. It is just a 2 wire low voltage line that when connected the heater fires and when open the heater is off. You can run the firemans switch line into your house and control it by any SPST switch.

Can I control my pool heater remotely?

Control Your Pool Pump & Heater Via Your Phone From Anywhere In The World! The HeaterReader is smart pool hardware with an App that gives you remote access to any gas, propane or electric swimming pool heater and pump - without the expensive and complex installation that is required by other devices.

Is AquaLink compatible with Pentair?

AquaLink RS:

Compatible with variable speed pumps from other manufacturers including Pentair. Compatible with internet-based smart phone controls or radio frequency PDAs through add-ons.

What pool lights work with AquaLink?

What type of color lights are supported with iAquaLink? iAquaLink supports color lights manufactured by Jandy®, Pentair® and Hayward®.

How does sense and dispense work?

The HL-CHEM continuously tests the pool's sanitiza- tion and pH levels allowing the OmniLogic/OmniHub to automatically generate the correct amount of chlorine and dispense the proper amount of pH reducer. Together, they provide an automated system controlling both sanitization and pH balance.

How do I update OmniLogic firmware?

You need to bring the USB memory stick to the OmniLogic and simply plug it into the side of the Local Display behind the Dead Front. Next, you will go into OmniLogic's Configuration Menu and push Firmware Upgrade. The OmniLogic will automatically reboot with the new Firmware.

How do I run electricity to my above ground pool?

Plug in the pool pump and cover it with a weatherproof cover. With the main service off to the house, wire in GFCI circuit breakers to the electrical panel. Connect an 8-gauge wire to the metal posts of the pool, the pump, and the metal plate on the skimmer and then wire that to the pump to bond the entire pool.

How do I connect my phone to iAquaLink?

After clearing the WiFi settings and with the Wired/WiFi switch set to WiFi, use a smartphone or WiFi enabled device to go to WiFi settings. Connect to the network labeled iAquaLink. iAquaLink will display the networks it detects, as well as signal strength. Select the network iAquaLink should use.

Previous article
Is a pool pump necessary?
Next article
What is the lock part of a door called?