Hard water stains can look pretty unsightly if they are not tackled, making the toilet looking dirtier than it actually is. You can also spray WD 40 in the bathroom or sink to deal with the same issue. It will get rid of hard water stains and limescale and make your toilet look much brighter.
A quick once-over with a cloth sprayed with WD-40 is great for removing soap scum from shower doors and can also prevent mildew from returning. It's also a great way to clean the grout between your bathroom tiles, remove stubborn stains from your toilet bowl, and rust stains on porcelain caused from aerosol cans.
To clean calcium buildup out of your toilet, use vinegar or another acidic cleaner. The acid will break down the mineral deposits so you can brush them away. Be sure to take the necessary safety precautions when working with cleaners. Wear gloves and eyewear and open windows for ventilation.
The solvents in WD-40 help dissolve gunk and lime in your toilet. Spray WD-40 in your toilet bowl and leave it for one to two minutes. Then, use a toilet brush to help scrub away the grime. Because it's so effective, there's no need to saturate your toilet—a little goes a long way.
Pour about one cup of white vinegar into the toilet bowl, followed by about one cup of baking soda, then let it rest for around 10 minutes. It's a good idea to wear gloves when using this as a toilet cleaner and to have eye protection.
WD-40 can be used on just about everything. It is safe for metal, rubber, wood and plastic. WD-40 can be applied to painted metal surfaces without harming the paint. Polycarbonate and clear polystyrene plastic are among the few surfaces on which to avoid using a petroleum-based product like WD-40.
Vinegar is a natural acid that can dissolve calcium deposits. You can pour vinegar into the toilet bowl and let it sit for a few hours before scrubbing with a toilet brush.
How do you clean a badly stained toilet? White vinegar is a good remedy to clean stubborn toilet stains. Pour a 120ml bottle of white vinegar into the toilet bowl and put down the lid. Don't use or flush the toilet for eight or so hours, then use a toilet brush to scrub.
Fighting against traces of lime scale on your bathroom tiles can be done with natural products such as lemon juice, white vinegar, baking soda, citric acid and anti-lime scale chemicals. The porcelain tiles and traces of limescale.
Use Coke specifically when you need to remove problem stains like limescale or rust. If you want to avoid the risk of tinting your toilet with Coke, a light-colored carbonated soft drink such as 7UP or tonic water will also suffice.
It's so annoying when your hard water leaves unsightly spots on your shower door or dishes, or porcelain, tile and metal surfaces. But spritz a little WD-40 on those spots, and you'll be able to easily wipe them away. If you use the spray on dishes, make sure to thoroughly wash before using them.
Muriatic acid (hydrochloric acid) can remove limescale deposits. However, it is very corrosive, can be dangerous to the skin and eyes, and should not be inhaled. Use citric acid cleaning solutions.
How limescale ends up in your toilet? In many areas, tap water is known as hard water because it carries dissolved minerals like calcium and magnesium. When hard water evaporates, it leaves behind minerals that react and form a hard, chalky-like buildup known as limescale.
For this cleaning task, the more, the merrier, pour vinegar (about 1 litre) and a few cups of bicarb will work fine. Give the solution a mix until you have a paste. Then, add it to the toilet bowl and leave it to soak for as long as possible, at least an hour.
The contaminants notorious for causing brown stains in toilet bowls are iron, manganese and sulfur. These pollutants can also produce iron bacteria, manganese bacteria and sulfur bacteria, which also can produce brown stains.
Patients who suffer from arthritis are trying anything to relieve those stiff and aching joints. Some have even tried spraying sore joints with WD-40 as they would to fix a squeaky, door hinge. But this folk remedy is not proven to work and may even be harmful.
Mineral oil
Turns out it can do even more, taking on many of the same jobs as WD-40, like lubricating sticky parts, helping to remove residue and grime, and protecting metal tools from rust. For metal and wood tools, like garden shovels, mineral oil can protect both the metal and wood from damage.
Solution 3: Using WD-40 to remove limescale
Yes, it's that simple. The best part about using a cleaning solution like WD-40 is that its specially engineered formula works its way under the build-up in no time, making the cleaning process easier and more convenient.
Step 1: Pour 1 cup of white vinegar directly into the toilet bowl and use a toilet brush to mix this around in the water. Leave it to sit for around one minute. Step 2: Then, add 1 cup of baking soda to the toilet bowl, followed by 1 to 2 cups of white vinegar.