You can also make an all-natural window cleaning solution using a mixture of equal parts white vinegar and hot water. Adding a touch of liquid soap to the vinegar solution will help remove any streak-causing wax left on the window from commercial cleaners used in the past.
Combine two parts water with one part white vinegar in a spray bottle and you'll be all set with a homemade window cleaner. You can also combine warm water with a few drops of dishwashing soap if you prefer.
For very dirty windows, especially exterior windows, combine 2 cups of water, 1/4 cup of vinegar, and 1/2 tsp of dish detergent. If you're cleaning immediately, use warm but not hot water for added cleaning power. Shake the bottle to combine.
Vinegar is non-toxic, making it perfect for cleaning your windows instead of using harsh chemicals. It is much more economical than chemical cleaning solutions. Crawling insects are also not fond of vinegar, so using this solution will help keep your windows looking cleaner for longer.
(I found Windex to work better, but if you have pets—or kids—who frequently lick outdoor windows, vinegar may be the best route for you.)
“Vinegar is a good cleaner because it's acidic, but when you add dishwashing liquid/dish soap to it (which is a base or neutral) - you neutralise the vinegar. You take away the very thing that makes it work well. “The dishwashing liquid works that well on its own. Adding the vinegar is a pointless step.”
The most common professional window cleaning solution recipe is filtered or distilled water and dish soap. Just a few spoonfuls of dish soap is all that's needed to create foam for gliding and to help break up any grease and dirt on the glass during cleaning.
In a spray bottle, combine 2 cups of white vinegar, 2 cups of water, and 5 drops of concentrated dish soap. Give it a good shake to thoroughly mix the ingredients. The vinegar is an acid and will help break up any mineral or hard water deposits. The dish soap helps to soften up the grime and gently remove dirt.
As a general rule, most natural cleaning experts suggest mixing one part vinegar to one part water. These recommendations typically rely on distilled white vinegar as the cleaning element. If homeowners are using cleaning vinegar, they may want to add a little more water to achieve a similar amount of acetic acid.
A recipe containing 2 cups of water, ¼ cup of white vinegar, and up to ½ teaspoon of liquid soap or detergent in a spray bottle or bucket is ideal. See below for larger batches. Start with your inside windows first. With tools and cleaning solution ready, it's time to do the work.
White and distilled are types of vinegar. They differ fundamentally in their acetic acid content. White, also known as spirit vinegar, has 5% to 20% acetic acid. This is generally higher as compared to distilled vinegar's 5%-8%.
But when you combine the two, you get an effective, sprayable miracle cleaner that clings to surfaces. Just spray it on, let it sit for a while, then scrub lightly and rinse, and you'll be amazed at the results every time!
Pour 2 cups Dawn and 2 cups vinegar into a glass bowl. Stir; heat 4 minutes in the microwave; remove and stir again. Shake well to mix the solution. Use as needed on shower doors.
What's happening in there? A chemical reaction between the vinegar and the baking soda produces bubbles of carbon dioxide gas. The dish detergent in the vinegar helps the bubbles last longer than they would with just vinegar and baking soda.
Vinegar can be a great cleaning solution for floors, counters, and tiles – but remember, you shouldn't use it on natural stone (like granite or marble) or natural wood (like hardwood flooring or wooden furniture).
Rinsing is not necessary! If you're simply using a vinegar and water solution to wipe and disinfect, you won't need to rinse. However, if there's also plenty of dirt and grime you're wiping away, you may also want to rinse with some extra water.
Salt and other minerals in the hard water might look clean as you wash the window, but once dry it becomes a white streaky mess. This is often seen on windows that are hit by sprinklers or ground water, although there are some areas that have hard enough water inside to look this way as well.
A big problem is the evaporation rate. If you're cleaning your windows on a warm sunny day, the liquid part of the solution evaporates quickly and leaves behind a residue that appears as streaks. On the other hand, if you don't entirely remove the liquid you can also be left with a streaky window.