Does putting your AC on “fan” save energy in Holdrege? Not necessarily. Typically, running your air conditioner's fan constantly is going to drive up your energy bill slightly. But it also provides a few advantages (and downsides) when it comes to your residence's comfort.
Saving money is one of the most obvious reasons to not keep the air conditioner fan on all the time. As you've probably guessed, when it's continuously in operation, it uses up a lot of energy. As a result, you could pay hundreds of dollars more in energy bills each year than you otherwise would.
Energy Efficiency: Running the fan mode uses less power, making it an energy-efficient choice for extending the life of your AC system and saving on energy bills.
When the California summer heat rolls in, pairing your AC with a ceiling fan is your best defense. By correctly setting the fan's direction, adjusting the thermostat, and a few other simple strategies, you can keep your home cool without driving up your energy bill.
For all the upsides of a constantly running fan, there are some downsides. The most significant is the increase in energy usage and the subsequent higher bills. When you're trying to cut expenses, keeping the AC fan on 24/7 isn't helpful and will probably cost you more.
Energy Efficiency: When cooling or heating is not required, using the 'Fan' mode alone consumes less energy than running the full HVAC system. This is particularly beneficial during mild weather conditions.
How Much Electricity Does a Ceiling Fan Use? Ceiling fans come in a variety of wattages, but a standard 48-inch model uses about 75 watts per hour on average. This would cost you about $0.01 per hour, or $6 per month if you leave your ceiling fan on 24/7 all month.
It only makes you FEEL cooler because it's moving air over your skin, carrying the heat away from your body. This is the wind chill factor you hear on the Weather Channel so often. So it's doing nothing to lower the temperature in your home, meaning your A/C will run just as long whether the fan is on or not.
Your air conditioning system is one of the biggest culprits behind skyrocketing electric bills. When your air filter is dirty, refrigerant levels are low, your thermostat is faulty or you lack proper maintenance, your A/C system can end up using a lot more energy than it should.
Improved AC Health
Running a ceiling fan with your AC means the air conditioner doesn't need to work as hard. You set the temperature of your AC higher than you normally would, meaning your unit won't have to run as much as it would otherwise.
What does the fan setting on an air conditioner do? It activates the unit's fan to circulate the existing air in the room without engaging the cooling mechanism. This way, it helps in creating a fresh ambiance without significantly altering the room's temperature or humidity levels.
Eco or energy-saving mode
This is the ideal mode for users looking to save up on energy bills by toning down the performance of the AC and its compressor. Eco-mode uses less electricity by automatically adjusting the fan speed and temperature, while still maintaining a comfortable level of cooling.
As long as the weather outside isn't excessively hot or humid, keeping your AC switched off while you sleep is a great way to reduce your energy costs. In fact, even in the nighttime temperatures are still in the 80s, this is still a good option as long as it isn't too humid outside.
Some homeowners naturally worry about the risks of a breakdown if they run the fan all the time, but this will not be a concern for you if your HVAC system was properly installed and maintained.
Using your ceiling fans and AC unit simultaneously can help save you money on your monthly cooling bill. According to the Department of Energy, if you use air conditioning to cool your home, a ceiling fan will allow you to raise the thermostat setting about 4°F with no reduction in comfort.
You can run the fan independently of the AC by switching the fan to “Fan On,” which will keep the blower fan running whether there's a demand for cooling or not. The AC can still come on, but you'll have continuous air circulation when it's not. You can also shut the AC off completely so only the fan runs.
So, is it better to leave your AC on all day? Well, it depends. After all, turning the AC on and off costs more initially. However, leaving your AC on all day consumes more energy and adds wear and tear to your system, which may cost you more money for repairs in the long run.
A running fan uses lots of electricity to cycle. Plus, you'll decrease your AC's efficiency during the hot summer months. Your vents could blow hot air into your home, increasing your unit's regulation cycling. This will also greatly increase your energy bill during hot or cold seasons.
For your AC system to cool efficiently, the fan needs to be able to move a certain amount of air every minute. For every AC ton, you need between 350 to 400 cubic feet of air per minute (CFM), i.e. a 2.5-ton AC needs 875 to 1,000 CFM, a 5-ton AC needs 1,750 to 2,000 CFM, etc.
Keeping your fan on AUTO is the most energy-efficient option. The fan only runs when the system is on and not continuously. There is better dehumidification in your home during the summer months. When your fan is set to AUTO, moisture from cold cooling coils can drip and be drained outside.
Cons to Keeping Fan Continuously Running:
It could cost you hundreds of dollars a year. The average unit has a 500 watt fan, which uses almost as much energy over the course of the year as a refrigerator, resulting in a $50/month bill.
Typically, running your air conditioner's fan constantly is going to drive up your energy bill slightly.
A ceiling fan is made up of different parts and pieces, and they will wear out over time. Sure, your ceiling fan can run throughout the day and night without issue, but running it for several days or months on end may not be the smartest choice and will reduce the overall lifetime of your fan.